Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IET Communications

Selective max‐min algorithm for low‐density parity‐check decoding

Ahmed Hareedy, Mohamed M. Khairy

Published Jan 1, 2013• 4 citations
Publisher

Abstract

With the growing importance of error correction in different communication systems, using an efficient and easily implementable code is always appreciated. One of the most important codes is the low‐density parity‐check (LDPC) code. Two main iterative decoding algorithms are usually used, namely the sum‐product (SP) algorithm (also referred to as belief propagation) and the min–sum (MS). The SP algorithm is more accurate but suffers from very high complexity. On the other hand, the MS algorithm has a much lower complexity at the expense of some performance degradation. To handle this performance degradation, many algorithms were presented in the literature as improvements for the MS, like the scaled MS and the offset MS. However, all those improved algorithms are more complex than the traditional MS. In this study, an efficient and low complexity LDPC decoding algorithm, called selective max–min (SMM), is proposed. The SMM performance is closer to SP than to MS as long as the average number of ones per column in the parity check matrix is around or less than 4 (which is the case for most of the communication systems using LDPC). On the other hand, the SMM exhibits only a minor complexity increase over traditional MS making it suitable for practical implementation.

DOI
10.1049/iet-com.2011.0722

Related papers

On implementation of min-sum algorithm for decoding low-density parity-check (LDPC) codes

Farhad Zarkeshvari, Amir H. Banihashemi

This paper is concerned with the implementation issues of the so-called min-sum algorithm (also referred to as max-sum or max-product) for the decoding of low-density parity-check (LDPC) codes. The effects of clipping threshold and the number of quantization bits on the performance of the min-sum algorithm at short and intermediate block lengths are studied. It is shown that min-sum is robust against quantization effects, and in many cases, only four quantization bits suffices to obtain close to ideal performance. We also propose modifications to the min-sum algorithm that improve the performance by a few tenths of a dB with just a small increase in decoding complexity.

Globecom•Mar 22, 2004•49 citations

Improved LDPC decoding algorithms based on min-sum algorithm

Y.V. A. C. Kumara, Chandika Bandara Wavegedara

Low-Density Parity check (LDPC) codes offer high-performance error correction near the Shannon limit which employs large code lengths and some iterations in the decoding process. The conventional decoding algorithm of LDPC is the Log Likelihood Ratio based Belief Propagation (LLR BP) which is also known as the `Sum-Product algorithm' which gives the best decoding performance and requires the most computational complexity and implementations with increased hardware complexity. Another simpler variant of this algorithm is used which is known as `min-sum algorithm' which reduces computational complexity as well as hardware complexity but with reduced accuracy. This paper analyzes the reason min-sum algorithm is more prone to errors when compared to the sum-product algorithm, and puts forward two improved algorithms which improve the performance of the min-sum algorithm with comparable algorithmic complexity.

Moratuwa Engineering Research Conference (MERCon)•Apr 1, 2016•8 citations

Optimized Min-Sum Decoding Algorithm for Low Density Parity Check Codes

Mohammad Rakibul, Dewan Siam Shafiullah, Muhammad Mostafa +1 more

Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

International Journal of Advanced Computer Science and Applications•Jan 1, 2011•19 citations

Optimized Min-Sum Decoding Algorithm for Low Density Parity Check Codes

Mohammad Rakibul Islam, Dewan Siam Shafiullah, Muhammad Mostafa +2 more

Abstract ― Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

•Oct 31, 2015•2 citations

Design and Implementation of Low Bit Error Rate of LDPC Decoder

Ashlesha P. Kshirsagar, Sandeep Kakde, Manish Devendra Chawhan +1 more

Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.

International Conference on Communication Systems and Network Technologies•Apr 1, 2015•1 citation

A Second Minimum Approximation Method for Layered Min-Sum Decoding of QC-LDPC Codes

Zijian Qin, Yangcan Zhou, Zhongfeng Wang

Low-density parity-check (LDPC) codes have attracted tremendous attention for their excellent error-correction performance and inherent fitness for high-parallelism implementation. With great complexity reduction and friendly for hardware implementation, the min-sum (MS) decoding algorithm for LDPC codes gains widespread applications in practical. In the MS decoding algorithm, finding the first two minima among input variable-to-check messages is the most complex part. To further reduce the complexity of the MS decoding algorithm, an efficient single-minimum (single-min) based layered MS decoding for quasi-cyclic LDPC (QC-LDPC) codes is proposed in this paper. It is found that statistically the difference between the first minimum and second minimum increases as the decoding becomes more convergent. Accordingly, in the proposed single-min scheme, the second minimum is approximately derived based on the first minimum and an index indicating the convergence degree. Besides, some other metrics that are easily obtained are used to refine the second minimum. Simulation results show that the proposed method can significantly improve the error-correction performance and lower the average number of iterations, compared with the state-of-the-art single-min based MS decoding algorithms.

Information Communication Technologies Conference (ICTC)•May 17, 2023•1 citation
With the growing importance of error correction in different communication systems, using an efficient and easily implementable code is always appreciated. One of the most important codes is the low‐density parity‐check (LDPC) code. Two main iterative decoding algorithms are usually used, namely the sum‐product (SP) algorithm (also referred to as belief propagation) and the min–sum (MS). The SP algorithm is more accurate but suffers from very high complexity. On the other hand, the MS algorithm has a much lower complexity at the expense of some performance degradation. To handle this performance degradation, many algorithms were presented in the literature as improvements for the MS, like the scaled MS and the offset MS. However, all those improved algorithms are more complex than the traditional MS. In this study, an efficient and low complexity LDPC decoding algorithm, called selective max–min (SMM), is proposed. The SMM performance is closer to SP than to MS as long as the average number of ones per column in the parity check matrix is around or less than 4 (which is the case for most of the communication systems using LDPC). On the other hand, the SMM exhibits only a minor complexity increase over traditional MS making it suitable for practical implementation.
This paper is concerned with the implementation issues of the so-called min-sum algorithm (also referred to as max-sum or max-product) for the decoding of low-density parity-check (LDPC) codes. The effects of clipping threshold and the number of quantization bits on the performance of the min-sum algorithm at short and intermediate block lengths are studied. It is shown that min-sum is robust against quantization effects, and in many cases, only four quantization bits suffices to obtain close to ideal performance. We also propose modifications to the min-sum algorithm that improve the performance by a few tenths of a dB with just a small increase in decoding complexity.
Low-Density Parity check (LDPC) codes offer high-performance error correction near the Shannon limit which employs large code lengths and some iterations in the decoding process. The conventional decoding algorithm of LDPC is the Log Likelihood Ratio based Belief Propagation (LLR BP) which is also known as the `Sum-Product algorithm' which gives the best decoding performance and requires the most computational complexity and implementations with increased hardware complexity. Another simpler variant of this algorithm is used which is known as `min-sum algorithm' which reduces computational complexity as well as hardware complexity but with reduced accuracy. This paper analyzes the reason min-sum algorithm is more prone to errors when compared to the sum-product algorithm, and puts forward two improved algorithms which improve the performance of the min-sum algorithm with comparable algorithmic complexity.
Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
Abstract ― Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.
Low-density parity-check (LDPC) codes have attracted tremendous attention for their excellent error-correction performance and inherent fitness for high-parallelism implementation. With great complexity reduction and friendly for hardware implementation, the min-sum (MS) decoding algorithm for LDPC codes gains widespread applications in practical. In the MS decoding algorithm, finding the first two minima among input variable-to-check messages is the most complex part. To further reduce the complexity of the MS decoding algorithm, an efficient single-minimum (single-min) based layered MS decoding for quasi-cyclic LDPC (QC-LDPC) codes is proposed in this paper. It is found that statistically the difference between the first minimum and second minimum increases as the decoding becomes more convergent. Accordingly, in the proposed single-min scheme, the second minimum is approximately derived based on the first minimum and an index indicating the convergence degree. Besides, some other metrics that are easily obtained are used to refine the second minimum. Simulation results show that the proposed method can significantly improve the error-correction performance and lower the average number of iterations, compared with the state-of-the-art single-min based MS decoding algorithms.