Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Globecom

On implementation of min-sum algorithm for decoding low-density parity-check (LDPC) codes

Farhad Zarkeshvari, Amir H. Banihashemi

Published Mar 22, 2004• 49 citations
Publisher

Abstract

This paper is concerned with the implementation issues of the so-called min-sum algorithm (also referred to as max-sum or max-product) for the decoding of low-density parity-check (LDPC) codes. The effects of clipping threshold and the number of quantization bits on the performance of the min-sum algorithm at short and intermediate block lengths are studied. It is shown that min-sum is robust against quantization effects, and in many cases, only four quantization bits suffices to obtain close to ideal performance. We also propose modifications to the min-sum algorithm that improve the performance by a few tenths of a dB with just a small increase in decoding complexity.

DOI
10.1109/glocom.2002.1188418

Related papers

On Implementation of Min-Sum Algorithm and Its Modifications for Decoding Low-Density Parity-Check (LDPC) Codes

J. Zhao, Farhad Zarkeshvari, Amir H. Banihashemi

The effects of clipping and quantization on the performance of the min-sum algorithm for the decoding of low-density parity-check (LDPC) codes at short and intermediate block lengths are studied. It is shown that in many cases, only four quantization bits suffice to obtain close to ideal performance over a wide range of signal-to-noise ratios. Moreover, we propose modifications to the min-sum algorithm that improve the performance by a few tenths of a decibel with just a small increase in decoding complexity. A quantized version of these modified algorithms is also studied. It is shown that, when optimized, modified quantized min-sum algorithms perform very close to, and in some cases even slightly outperform, the ideal belief-propagation algorithm at observed error rates.

IEEE Transactions on Communications•Apr 1, 2005•283 citations

Optimized Min-Sum Decoding Algorithm for Low Density Parity Check Codes

Mohammad Rakibul Islam, Dewan Siam Shafiullah, Muhammad Mostafa +2 more

Abstract ― Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

•Oct 31, 2015•2 citations

Optimized Min-Sum Decoding Algorithm for Low Density Parity Check Codes

Mohammad Rakibul, Dewan Siam Shafiullah, Muhammad Mostafa +1 more

Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

International Journal of Advanced Computer Science and Applications•Jan 1, 2011•19 citations

Optimized Min-Sum decoding algorithm for Low Density PC codes

Dewan Siam Shafiullah, Mohammad Rakibul Islam, Muhammad Mostafa Amir Faisal +1 more

Low Density Parity Check (LDPC) approaches Shannon -limit performance for binary field and long code lengths. However performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding, while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.

International Conference on Advanced Communication Technology•Jan 1, 2012•5 citations

A low-complex Min-Sum decoding algorithm for irregular LDPC codes

Michaelraj Kingston Roberts, Maria Falaq

This paper presents a low complexity Min-Sum algorithm for decoding irregular Low-Density Parity-Check (LDPC) codes. In the proposed algorithm, the significant improvement in the error correcting performance without enhancing the hardware complexity is achieved by employing adaptive and optimized normalization factors for both the extrinsic information and log-likelihood ratio data bits respectively. The experimental results demonstrate that the proposed algorithm with 6-bit non-uniform quantization achieves reasonable decoding performance in terms of Frame Error Rate (FER) and Bit Error Rate (BER) without increasing the hardware complexity by avoiding finite word length effects of soft information.

International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET)•Mar 1, 2016•3 citations

Performance of Quantized Min-Sum Decoding Algorithms for Irregular LDPC Codes

Daesun Oh, Keshab K. Parhi

This paper analyzes the performance of quantized min-sum decoding algorithms for irregular low-density parity-check (LDPC) codes. For regular LDPC codes, it is known that the normalized or offset min-sum decoding algorithm with quantization bits less than 6 bits achieves good performances over wide range of signal-to-noise ratios (SNR). However, finite precision effects in decoding irregular LDPC codes are different from that in decoding regular LDPC codes which is caused by the difference of convergence speeds between low degree nodes and high degree nodes. This paper proposes a novel method to improve the performance of the conventional normalized or offset min-sum decoding algorithm when it is approximated with finite precision for hardware implementations. The proposed method applies down-scaling factors to intrinsic information which has effects on increasing the reliability of extrinsic information at variable nodes and compensating the quantization errors caused by finite precision. Computer simulation results for irregular LDPC codes show that the proposed normalized and offset min-sum decoding algorithms achieve better performances at high SNR compared to the conventional normalized and offset min-sum algorithms under (6:2) quantization scheme.

IEEE International Symposium on Circuits and Systems proceedings•May 1, 2007•15 citations
This paper is concerned with the implementation issues of the so-called min-sum algorithm (also referred to as max-sum or max-product) for the decoding of low-density parity-check (LDPC) codes. The effects of clipping threshold and the number of quantization bits on the performance of the min-sum algorithm at short and intermediate block lengths are studied. It is shown that min-sum is robust against quantization effects, and in many cases, only four quantization bits suffices to obtain close to ideal performance. We also propose modifications to the min-sum algorithm that improve the performance by a few tenths of a dB with just a small increase in decoding complexity.
The effects of clipping and quantization on the performance of the min-sum algorithm for the decoding of low-density parity-check (LDPC) codes at short and intermediate block lengths are studied. It is shown that in many cases, only four quantization bits suffice to obtain close to ideal performance over a wide range of signal-to-noise ratios. Moreover, we propose modifications to the min-sum algorithm that improve the performance by a few tenths of a decibel with just a small increase in decoding complexity. A quantized version of these modified algorithms is also studied. It is shown that, when optimized, modified quantized min-sum algorithms perform very close to, and in some cases even slightly outperform, the ideal belief-propagation algorithm at observed error rates.
Abstract ― Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
Low Density Parity Check (LDPC) code approaches Shannon–limit performance for binary field and long code lengths. However, performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods, an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program, and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
Low Density Parity Check (LDPC) approaches Shannon -limit performance for binary field and long code lengths. However performance of binary LDPC code is degraded when the code word length is small. An optimized min-sum algorithm for LDPC code is proposed in this paper. In this algorithm unlike other decoding methods an optimization factor has been introduced in both check node and bit node of the Min-sum algorithm. The optimization factor is obtained before decoding program and the same factor is multiplied twice in one cycle. So the increased complexity is fairly low. Simulation results show that the proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding, while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.
This paper presents a low complexity Min-Sum algorithm for decoding irregular Low-Density Parity-Check (LDPC) codes. In the proposed algorithm, the significant improvement in the error correcting performance without enhancing the hardware complexity is achieved by employing adaptive and optimized normalization factors for both the extrinsic information and log-likelihood ratio data bits respectively. The experimental results demonstrate that the proposed algorithm with 6-bit non-uniform quantization achieves reasonable decoding performance in terms of Frame Error Rate (FER) and Bit Error Rate (BER) without increasing the hardware complexity by avoiding finite word length effects of soft information.
This paper analyzes the performance of quantized min-sum decoding algorithms for irregular low-density parity-check (LDPC) codes. For regular LDPC codes, it is known that the normalized or offset min-sum decoding algorithm with quantization bits less than 6 bits achieves good performances over wide range of signal-to-noise ratios (SNR). However, finite precision effects in decoding irregular LDPC codes are different from that in decoding regular LDPC codes which is caused by the difference of convergence speeds between low degree nodes and high degree nodes. This paper proposes a novel method to improve the performance of the conventional normalized or offset min-sum decoding algorithm when it is approximated with finite precision for hardware implementations. The proposed method applies down-scaling factors to intrinsic information which has effects on increasing the reliability of extrinsic information at variable nodes and compensating the quantization errors caused by finite precision. Computer simulation results for irregular LDPC codes show that the proposed normalized and offset min-sum decoding algorithms achieve better performances at high SNR compared to the conventional normalized and offset min-sum algorithms under (6:2) quantization scheme.