The semiconductor industry standard computer-aided-design (CAD) tool Cadence has been calibrated for a 3 /spl mu/m Niobium technology in order to design and build superconductive single flux quantum (SFQ) circuits. The top-down design methodology includes Verilog functional simulation, schematic capture, graphic layout, functional verification, design rule checking, electrical rule checking, and layout-vs.-schematic verification. This design framework has been used successfully at the University of Rochester in designing more than 15 elementary SFQ cells and three large scale digital and mixed-signal SFQ circuits, demonstrating significant improvement in both design efficiency and accuracy.
The semiconductor industry standard computer-aided-design (CAD) tool Cadence has been calibrated for a 3 /spl mu/m Niobium technology in order to design and build superconductive single flux quantum (SFQ) circuits. The top-down design methodology includes Verilog functional simulation, schematic capture, graphic layout, functional verification, design rule checking, electrical rule checking, and layout-vs.-schematic verification. This design framework has been used successfully at the University of Rochester in designing more than 15 elementary SFQ cells and three large scale digital and mixed-signal SFQ circuits, demonstrating significant improvement in both design efficiency and accuracy.
The semiconductor industry standard compu- ter-aided-des~gn (CAD) tool Cadence has been calibrated for a 3 pm Niobium technology in order to design and build superconductive single flux quantum (SFQ) circuits. The top-down design methodology includes Verilog func- tional simulation, schematic capture, graphic layout, func- cation, design rule checking, electrical rule checking, and layout-vs.-schematic verification. This de- sign framework has been used successfully at the Univer- sity of Rochester in designing more than 15 elementary SFQ cells and three large scale digital and mixed-signal SFQ circuits, de onstrating significant improvement in both design efficiency and accuracy.
New tools have been created to allow a superconducting design flow for schematic design, verification, and optimization. These tools integrate with the Cadence design environment. In single flux quantum superconducting electronics, individual component values, such as wire inductances, Josephson junction critical currents, and bias currents, must be optimized to allow for maximum deviance from the designer value, which is also known as the device margin. One tool is used to create a description of the proper circuit behavior. Included with this tool is the ability to automatically create the description from a Cadence netlist. The other tool is an automated device margin circuit schematic verification and optimization tool, which widens device margins while maintaining proper circuit behavior derived from the first tool. Additionally, this optimization tool can automatically correct the circuit schematic using the proper circuit behavior description. In this paper, the functionality of the language used to create the description of the proper circuit behavior is presented. Several circuits are then verified and optimized based on their correct behavior.
Single Flux Quantum (SFQ) electronic circuits originated with the advent of Rapid Single Flux Quantum (RSFQ) logic in 1985 and have since evolved to include more energy-efficient technologies such as ERSFQ and eSFQ. SFQ logic circuits, based on the manipulation of quantized flux pulses, have been demonstrated to run at clock speeds in excess of 120 GHz, and with bit-switch energy below 1 aJ. Small SFQ microprocessors have been developed, but characteristics inherent to SFQ circuits and the lack of circuit design tools have hampered the development of large SFQ systems. SFQ circuit characteristics include fan-out of one and the subsequent demand for pulse splitters, gate-level clocking, susceptibility to magnetic fields and sensitivity to intra-gate and inter-gate inductance. Superconducting interconnects propagate data pulses at the speed of light, but suffer from reflections at vias that attenuate transmitted pulses. The recently started IARPA SuperTools program aims to deliver SFQ Computer-Aided Design (CAD) tools that can enable the successful design of 64 bit RISC processors given the characteristics of SFQ circuits. A discussion on the technology of SFQ circuits and the most modern SFQ fabrication processes is presented, with a focus on the unique electronic design automation CAD requirements for the design, layout and verification of SFQ circuits.
Rapid single flux quantum (RSFQ) digital circuits have reached the level of medium- to large-scale of integration. At this level, existing design methodologies, developed specifically for RSFQ circuits, have become computationally inefficient. Applying mature semiconductor methodologies to the design of RSFQ circuits, one encounters substantial difficulties originating from the differences between both technologies. In this paper, a new design methodology aimed at large-scale RSFQ circuits is proposed. This methodology is based on a semiconductor semicustom design approach. An established design methodology for small-stale RSFQ digital circuits, based on circuit (junction-level) simulation and device parameter optimization, is used for the design of basic RSFQ cells. A library composed of about 20 basic RSFQ cells has been developed based on this approach. A novel design methodology for large-scale circuits, presented in this paper, is based on logic (gate-level) simulation and timing optimization. This methodology has been implemented around the Cadence integrated design environment and used successfully at the University of Rochester for the design of two large-scale digital circuits.
I describe the fundamental technologies concerning the single flux quantum (SFQ) logic circuits. Recent remarkable progress in the computer-aided-design (CAD) tool, which is based on the cell-based design technique, enables us to make SFQ integrated circuits. Although the circuit demonstrated so far has 2, 300 Josephson junctions at most, this number will increase because the CAD tool is advancing. The on-chip test system has also been developed to test the high-speed nature of the SFQ circuit. For example, the shift-register employed as a circuit under test operates correctly at 55GHz. I also describe the potential applications of the SFQ circuits. An analog-to-digital converter utilizing the high-speed nature and high sensitivity in the SFQ circuits will be applicable to the front end of the future base stations, which require broad band width, high sensitivity, and flexibility. Packet switches used in the future high-end router need high throughput and functionality. Only SFQ-based packet switches can meet these requirements. Another potential application is a high-end server. We have studied micro-architectures of a processor executing the Java Byte Codes directly and a multiprocessor system constructed by connecting the processors and memories via the ultra-broad-band SFQ network switches. Throughout the study, we employ the concept of the complexity-reduction (CORE), in which the high-speed nature of the SFQ circuits is used for the reduction of the circuit scale or simplification of the micro-architecture; the multiprocessor system has high performances. These clear applications promote rapid technological progress in the SFQ technology, though we must make every endeavor to find new application fields.
Superconducting Single-Flux-Quantum (SFQ) devices have been paid much attention as alternative devices for digital circuits, because of their high switching speed and low power consumption. For large-scale circuit design, the role of computer-aided design environment is significant. As the characteristics of the SFQ devices are different from conventional devices, a new design environment is required. In this paper, we propose a new timing-aware circuit description method which can be used for SFQ circuit design. Based on the description and the dedicated algorithms we have been developing for SFQ logic circuit design, we propose an integrated design flow for SFQ logic circuits. We have designed a circuit using our developed design tools along with the design flow and demonstrated the correct operation.