Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Analog-to-digital converter based on RSFQ technology for radio astronomy applications

Masaaki Maezawa, Motohiro Suzuki, Hitoshi Sasaki, Akira Shoji

Published Nov 21, 2001• 6 citations
Publisher

Abstract

We are developing an analog-to-digital converter (ADC) based on rapid single-flux quantum technology for radio-astronomic spectroscopy applications where very wide bandwidth is required and relatively small resolution is sufficient. The ADC consists of periodic-flash comparators, a demultiplexer and output drivers; and is sufficiently simple to be implemented on a single chip using a conventional 2–3 μm Nb trilayer technology. A 2-bit ADC has been designed for operation at 16 GHz of the sampling frequency. All the subsystems of the ADC have been fabricated using standard 1.6 kA cm −2 Nb/AlO x /Nb technology and have been successfully tested.

DOI
10.1088/0953-2048/14/12/326

Related papers

Design of SFQ-counting analog-to-digital converter

J.C. Lin, Vasili K. Semenov, Konstantin K. Likharev

We describe the design of an oversampling single-flux-counting analog-to-digital converter with the estimated bandwidth of a few tens of MHz, based on Rapid Single-Flux-Quantum (RSFQ) devices. It consists of an input analog circuit, high-speed quantizer with an original analog/digital negative feedback loop, decimation (comb) filter, and supporting subsystems including clock distribution circuits, quantization signal conditioner, and output drivers. We have applied a new approach, the 'symmetrizing' negative feedback, to free the quantizer from the intrinsic hysteresis without dynamic range sacrifice. The 16-bit version of the system comprises about 1,500 Josephson junctions and consumes 1.2 mW of DC power, when implemented using Nb-trilayer technology with 1 kA/cm/sup 2/, 3.5 /spl mu/m Josephson junctions. All subsystems of the converter have been successfully tested and testing of the system as a whole is in progress.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•51 citations

Design and testing of QOS comparators for an RSFQ based analog to digital converter

DARREN K. BROCK, S.S. Martinet, Mark F. Bocko +1 more

Successful utilization of the quasi one-junction SQUID (QOS) as a signal comparator for analog-to-digital conversion (ADC) has been demonstrated by several groups, This idea is extended to show how similar comparators can be integrated into an all rapid single flux quantum (RSFQ) digital architecture. Comparators are interrogated by SFQ sampling pulses and in turn give output according to the RSFQ convention. One- and two-bit ADC's have been simulated, fabricated and tested at low speed. Total performance of these devices is estimated within the framework of a multiple bit parallel flash ADC architecture.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•10 citations

RSFQ front-end for a software radio receiver

E. Wikborg, Vasili K. Semenov, Konstantin K. Likharev

We present results of a preliminary analysis of possible front-ends of a software defined radio base station receiver containing superconductor Rapid Single-Flux-Quantum (RSFQ) components. The main component of such a front-end, an oversampling analog-to-digital converter (ADC) with expected internal clock rate up to 20 GHz has already been developed and fabricated with commercially available 3.5-/spl mu/m, 1-kA/cm/sup 2/ niobium-trilayer technology. Simulations show that, even with such crude feature size, the superconductor ADC components can outperform their semiconductor counterparts.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•49 citations

A niobium nitride-based analog to digital converter using rapid single flux quantum logic operating at 9.5 K

Masoud Radparvar

An analog to digital converter (ADC) using the rapid single flux quantum (RSFQ) logic family implemented in niobium nitride (NbN) technology is described. The circuit was originally developed and demonstrated in niobium technology. An identical circuit was then laid out, fabricated and demonstrated in NbN technology. The chips were fabricated using an eight-layer NbN-based process with Josephson junction critical current density of 500 A/cm/sup 2/. In this paper, we report on the measurement results for a 6-bit flux quantizing ADC which exhibited proper operation and good DC bias margins. We also demonstrate results from an ADC chip operating up to 9.5 K.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1994•14 citations

Single flux quantum digital devices

V. P. Koshelets

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

Superconductor Science and Technology•Nov 1, 1991•5 citations

Superconductor analog-to-digital converters

Oleg A. Mukhanov, Deepnarayan Gupta, Alan M. Kadin +1 more

Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.

Proceedings of the IEEE•Sep 20, 2004•185 citations
We are developing an analog-to-digital converter (ADC) based on rapid single-flux quantum technology for radio-astronomic spectroscopy applications where very wide bandwidth is required and relatively small resolution is sufficient. The ADC consists of periodic-flash comparators, a demultiplexer and output drivers; and is sufficiently simple to be implemented on a single chip using a conventional 2–3 μm Nb trilayer technology. A 2-bit ADC has been designed for operation at 16 GHz of the sampling frequency. All the subsystems of the ADC have been fabricated using standard 1.6 kA cm −2 Nb/AlO x /Nb technology and have been successfully tested.
We describe the design of an oversampling single-flux-counting analog-to-digital converter with the estimated bandwidth of a few tens of MHz, based on Rapid Single-Flux-Quantum (RSFQ) devices. It consists of an input analog circuit, high-speed quantizer with an original analog/digital negative feedback loop, decimation (comb) filter, and supporting subsystems including clock distribution circuits, quantization signal conditioner, and output drivers. We have applied a new approach, the 'symmetrizing' negative feedback, to free the quantizer from the intrinsic hysteresis without dynamic range sacrifice. The 16-bit version of the system comprises about 1,500 Josephson junctions and consumes 1.2 mW of DC power, when implemented using Nb-trilayer technology with 1 kA/cm/sup 2/, 3.5 /spl mu/m Josephson junctions. All subsystems of the converter have been successfully tested and testing of the system as a whole is in progress.>
Successful utilization of the quasi one-junction SQUID (QOS) as a signal comparator for analog-to-digital conversion (ADC) has been demonstrated by several groups, This idea is extended to show how similar comparators can be integrated into an all rapid single flux quantum (RSFQ) digital architecture. Comparators are interrogated by SFQ sampling pulses and in turn give output according to the RSFQ convention. One- and two-bit ADC's have been simulated, fabricated and tested at low speed. Total performance of these devices is estimated within the framework of a multiple bit parallel flash ADC architecture.>
We present results of a preliminary analysis of possible front-ends of a software defined radio base station receiver containing superconductor Rapid Single-Flux-Quantum (RSFQ) components. The main component of such a front-end, an oversampling analog-to-digital converter (ADC) with expected internal clock rate up to 20 GHz has already been developed and fabricated with commercially available 3.5-/spl mu/m, 1-kA/cm/sup 2/ niobium-trilayer technology. Simulations show that, even with such crude feature size, the superconductor ADC components can outperform their semiconductor counterparts.
An analog to digital converter (ADC) using the rapid single flux quantum (RSFQ) logic family implemented in niobium nitride (NbN) technology is described. The circuit was originally developed and demonstrated in niobium technology. An identical circuit was then laid out, fabricated and demonstrated in NbN technology. The chips were fabricated using an eight-layer NbN-based process with Josephson junction critical current density of 500 A/cm/sup 2/. In this paper, we report on the measurement results for a 6-bit flux quantizing ADC which exhibited proper operation and good DC bias margins. We also demonstrate results from an ADC chip operating up to 9.5 K.>
A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.
Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.