aqora

Superconducting Analog to Digital Converters

Joel M. Schoen

Contents: Superconducting Analog-to-Digital Converter Work at MITRE; Development of a Rapidly Tunable Microwave Source; Design and Evaluation of a Josephson Array Oscillator; Obtaining High-Accuracy Measurements from Low-Accuracy Measurements; Superconducting Microwave Transmission Lines; High Performance, Superconducting Analog-to-Digital Converter; Edge Sharpening with Josephson Junction; Design Evaluation of a Subranging Superconducting Analog-to-Digital Converter; Feasibility Study of a Superconducting Sigma-Delta Analog-to- Digital Converter, and VHDL Simulation Study of Superconducting Sigma Delta Modulators.Contents: Superconducting Analog-to-Digital Converter Work at MITRE; Development of a Rapidly Tunable Microwave Source; Design and Evaluation of a Josephson Array Oscillator; Obtaining High-Accuracy Measurements from Low-Accuracy Measurements; Superconducting Microwave Transmission Lines; High Performance, Superconducting Analog-to-Digital Converter; Edge Sharpening with Josephson Junction; Design Evaluation of a Subranging Superconducting Analog-to-Digital Converter; Feasibility Study of a Superconducting Sigma-Delta Analog-to- Digital Converter, and VHDL Simulation Study of Superconducting Sigma Delta Modulators.

Sep 1, 19910 citations

Study of high temperature superconducting circuits for microwave applications

E. Carlsson

Jan 1, 19960 citations

Microwave design for superconductor circuits

Pascal Febvre

Sep 29, 20240 citations

Integrated microwave circuits for digital-to-analogue converters based on high-temperature superconducting Josephson junction arrays

Alexander M. Klushin, C. Weber, M. Siegel +5 more

A digital-to-analogue converter based on series arrays of high-temperature superconducting Josephson junctions can work properly when the microwave bias current distribution in large arrays is uniform. Unfortunately, the considerable microwave attenuation per overdamped junction with normal resistances RN0.1 results in a strong total attenuation of the microwave signal in a traditional layout. Also, the meander geometry of the array, necessary when using bicrystal junctions, disturbs the uniformity of the rf current, especially in the millimetre waveband. To overcome these drawbacks we coupled the meander array inductively to a parallel transmission line. The mechanism of microwave coupling in which both external and mutual frequency locking takes place was studied numerically. A circuit with a coplanar waveguide feed line was fabricated and successfully tested at an operating frequency of 30 GHz. A microstrip line with a small attenuation for pumping of junction arrays at frequencies up to 120 GHz was demonstrated.A digital-to-analogue converter based on series arrays of high-temperature superconducting Josephson junctions can work properly when the microwave bias current distribution in large arrays is uniform. Unfortunately, the considerable microwave attenuation per overdamped junction with normal resistances RN0.1 results in a strong total attenuation of the microwave signal in a traditional layout. Also, the meander geometry of the array, necessary when using bicrystal junctions, disturbs the uniformity of the rf current, especially in the millimetre waveband. To overcome these drawbacks we coupled the meander array inductively to a parallel transmission line. The mechanism of microwave coupling in which both external and mutual frequency locking takes place was studied numerically. A circuit with a coplanar waveguide feed line was fabricated and successfully tested at an operating frequency of 30 GHz. A microstrip line with a small attenuation for pumping of junction arrays at frequencies up to 120 GHz was demonstrated.

Superconductor Science and TechnologyNov 1, 19992 citations

Microwave design optimization for broadband Josephson parametric amplifiers

Matthew J. Reagor, Eyob Alebachew Sete, D Thompson +3 more

Bulletin of the American Physical SocietyMar 17, 20160 citations

New microwave circuits for programmable voltage standards using high-temperature Josephson junction arrays

Alexander M. Klushin, C. Weber, H. Kohlstedt +4 more

New microwave circuits for voltage standard application containing 256 shunted bicrystal junctions were designed and investigated. The series array follows a meander line, which prevents the uniform distribution of microwave current along the array. To overcome this drawback, we are placing the meander parallel to a coplanar waveguide line. This provides parallel feeding of microwave power to series connected junctions. A circuit divided in 8 sub-arrays represents a seven-bit digital-to-analog converter. At a frequency f=27332 MHz and for a constant power each of the segments of the array demonstrated the first current step at 78 K.New microwave circuits for voltage standard application containing 256 shunted bicrystal junctions were designed and investigated. The series array follows a meander line, which prevents the uniform distribution of microwave current along the array. To overcome this drawback, we are placing the meander parallel to a coplanar waveguide line. This provides parallel feeding of microwave power to series connected junctions. A circuit divided in 8 sub-arrays represents a seven-bit digital-to-analog converter. At a frequency f=27332 MHz and for a constant power each of the segments of the array demonstrated the first current step at 78 K.

IEEE Transactions on Applied SuperconductivityJun 1, 199914 citations

Design optimization for microwave coupling structures of a digital-to-analog converter based on series arrays of high-temperature superconducting Josephson junctions

Related papers

Design optimization for microwave coupling structures of a digital-to-analog converter based on series arrays of high-temperature superconducting Josephson junctions

Related papers