Microwave design for superconductor circuits

H. Schulze, F. Muller, Ralf Behr +3 more

Nonhysteretic Josephson junctions with a superconductor-insulator-normal metal-insulator-superconductor (SINIS) structure fabricated using the reliable Nb-AlO/sub x/ technology have been used for the design and fabrication of a 1-V inherently stable Josephson voltage standard. The superconducting circuit can be driven at the same microwave frequencies as conventional SIS circuits. The microwave-induced 1-V step is suitable for calibration purposes. The successful operation of the 1-V circuit is due to an internal, phase-locked oscillation of all SINIS junctions which are embedded in a low-impedance strip-line. The microwave power required for exciting the coherent oscillation is very low and allows the integration of low power sources. Even operation without any external microwave source appears to be possible.

E. Carlsson

Joonas Govenius

This dissertation focuses on the development of a new type of thermal microwave photodetector based on superconductor–normal-metal–superconductor (SNS) junctions. We motivate the development of the detector mainly by microwave quantum optics applications in the context of superconducting qubits coupled to microwave transmission lines and resonators, i.e., in the context of circuit quantum electrodynamics (cQED). In cQED, single-photon microwave pulses naturally arise as a results of a qubit exchanging its excitation with a transmission line. While immense progress has been achieved in cQED in general, and in linear microwave amplification in particular, the challenge of developing an efficient and practical detector for single itinerant photons remains open, mostly due to the exceedingly small energy of individual microwave photons. This prevents microwave implementations of a certain class of quantum optical protocols, including the parity measurement protocol proposed in this dissertation. The core of this dissertation is dedicated to introducing our detector design, discussing the thermal properties of the detector in detail, and demonstrating the operation of the detector in a time-gated threshold detection mode. In particular, we demonstrate threshold detection of coherent 8.4 GHz microwave pulses containing roughly 200 photons, or 1.1 zJ of energy. Compared to other thermal detectors, this is an order of magnitude improvement in the energy of the detected pulses. In addition, we characterize the linear response of the SNS junctions as separate components. That is, we embed the junctions in a microwave circuit that is specifically designed to allow determining the electrical admittance of the SNS junctions from the response of the circuit as a whole.

Johann Heyen Hinken

Robert Adde

C. Rauscher, J.M. Pond, Gregory B. Tait

The channelized receiver being presented demonstrates the use of high temperature superconductor technology in a microwave system setting where superconductor, microwave-monolithic-integrated-circuit and hybrid-integrated-circuit components are united in one package and cooled to liquid-nitrogen temperatures. The receiver consists of a superconducting X-band four-channel demultiplexer with 100-MHz-wide channels, four commercial monolithically integrated mixers, and four custom-designed hybrid-circuit detectors containing heterostructure ramp diodes. The composite receiver unit has been integrated into the payload of the second-phase NRL high temperature superconductor space experiment (HTSSE-II). Prior to payload assembly, the response characteristics of the receiver were measured as functions of frequency, temperature, and drive levels. The article describes the circuitry, discusses the key issues related to design and implementation, and summarizes the experimental results.