Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Mirror magneto-optical trap using circularly polarized light-emitting optical fibers

Masaharu Hyodo, Kazuyuki Nakayama, R. Ohmukai, Kazuyoshi Kurihara, Masayoshi Watanabe

Published May 17, 2006• 2 citations
Publisher

Abstract

A fiber-optic mirror magneto-optical trap (mirror-MOT) that uses a pair of circularly polarized light-emitting optical fibers as an optical access is demonstrated. The fiber is fabricated so that a length of birefringence fiber, designed to be a quarter wave retarder at both wavelengths of 780 and 852 nm, is attached directly onto a polarization-maintaining normal fiber. The polarization states of light emitted from the fibers are sufficiently circular for the operation of a mirror-MOT with 87Rb atoms. The mirror-MOT is able to capture approximately the same number of atoms obtainable with a conventional mirror-MOT. The technique makes it possible to fabricate a compact MOT apparatus by introducing the optical fibers directly into an ultrahigh-vacuum chamber.

DOI
10.1364/ao.45.003629

Related papers

Realization of a magneto-optical trap by using linearly-polarized cooling beams

Hoon Yu, Mi Hyun Choi, Jung Bog Kim

We realized two species of magneto-optical traps (MOTs) by using linearly-polarized cooling beams. A mirror MOT was realized by using pairs of σ-π polarized cooling beams. Since the linearly-polarized field could act as opposite circular polarizations, atoms could be loaded on the mirror MOT with the elimination of one quarter-wave plate (QWP) among the four QWPs. However, for a typical MOT, counter-propagating cooling beams had to have opposite circular polarizations. The number of trapped atoms depended strongly on the polarization and optical alignment of the cooling beams when linear polarization with the elimination of one QWP was used. By using this anomalous alignment, we could increase the fluorescence of the mirror MOT. Furthermore, we were also able to realize a six-beam MOT with a configuration of pairs of orthogonal linearly-polarized cooling beams. The direction of the polarization depended strongly on the magnetic field for trapping.

Journal of the Korean Physical Society•May 1, 2012•1 citation

Development of mirror magneto-optical trap using circularly-polarized light-emitting optical fibers

Masayuki Hyodo, K. Nakayama, R. Ohmukai +2 more

Conference on Lasers and Electro-Optics•Jan 1, 2005•0 citations

Mirror magneto-optical trap exploiting hexapole-compensated magnetic field

Masaharu Hyodo, Kazuyuki Nakayama, Masayoshi Watanabe +1 more

A mirror magneto-optical trap (MOT) that exploits a hexapole-compensated magnetic field was developed and used in the experimental surface trapping of neutral atoms. A pair of subsidiary wires, which was placed near the main current-carrying wire, was designed to improve the uniformity of the quadrupole magnetic field and thus increased the effective capture volume of our mirror-MOT. In the experiment, the number of $^{87}\mathrm{Rb}$ atoms captured with our mirror-MOT was approximately twice that captured with a conventional mirror-MOT.

Physical Review A•Jul 26, 2007•10 citations

A dynamic magneto-optical trap for atom chips

Jo Rushton, Ritayan Roy, James Bateman +1 more

We describe a dynamic magneto-optical trap (MOT) suitable for the use with vacuum systems in which optical access is limited to a single window. This technique facilitates the long-standing desire of producing integrated atom chips, many of which are likely to have severely restricted optical access compared with conventional vacuum chambers. This 'switching-MOT' relies on the synchronized pulsing of optical and magnetic fields at audio frequencies. The trap's beam geometry is obtained using a planar mirror surface, and does not require a patterned substrate or bulky optics inside the vacuum chamber. Central to the design is a novel magnetic field geometry that requires no external quadrupole or bias coils which leads toward a very compact system. We have implemented the trap for 85 Rb and shown that it is capable of capturing 2 million atoms and directly cooling below the Doppler temperature.

arXiv:1607.08662•New Journal of Physics•Nov 9, 2016•5 citations

Single-beam magneto-optical trap in back-to-back pyramidal and conical mirrors

Timothy H. Nguyen, Mariam Mchedlidze, Guanghui Su +3 more

A three-dimensional magneto-optical trap (MOT), acting as an efficient method for producing cold atoms from room-temperature atomic vapor, has been widely used to develop atomic sensors. Various compact MOTs using a single laser beam have been reported, simplifying apparatuses and leading to miniaturized devices. Here, we propose single-beam MOTs based on back-to-back pyramidal and conical mirrors. In such back-to-back mirrors, a MOT trapping volume is formed by an incident laser beam, a retroreflected beam, and multiple reflections from the mirror surfaces. We present the design of back-to-back mirrors and a series of compact MOT configurations, with the potential of increasing access to the MOT and simultaneously creating multiple MOTs. We demonstrate a MOT in a back-to-back conical mirror, loading \ensuremath{\sim}1 \ifmmode\times\else\texttimes\fi{} ${10}^{7}$ ${}^{87}\mathrm{Rb}$ atoms from background vapor and cooling the atoms to \ensuremath{\sim}7 \textmu{}K using polarization gradients. Single-beam MOTs based on back-to-back mirrors contribute to building compact and scalable cold-atom-based sensors.

arXiv:2507.07925•Physical Review Applied•Sep 29, 2025•5 citations

A method for loading magneto-optical trap in an ultrahigh vacuum environment

Kavish Bhardwaj, Sourabh Sarkar, Surjya Prakash Ram +2 more

We have developed a method that enables loading a magneto-optical trap (MOT) in an ultrahigh vacuum environment. Nearly 1.0 × 108 atoms of 87Rb are trapped in the MOT at ∼2.0×10−10 Torr base pressure in the chamber. After the MOT loading, we have successfully demonstrated the working of a quadrupole magnetic trap in this chamber with a lifetime of ∼15 s.

AIP Advances•Jan 1, 2023•6 citations
A fiber-optic mirror magneto-optical trap (mirror-MOT) that uses a pair of circularly polarized light-emitting optical fibers as an optical access is demonstrated. The fiber is fabricated so that a length of birefringence fiber, designed to be a quarter wave retarder at both wavelengths of 780 and 852 nm, is attached directly onto a polarization-maintaining normal fiber. The polarization states of light emitted from the fibers are sufficiently circular for the operation of a mirror-MOT with 87Rb atoms. The mirror-MOT is able to capture approximately the same number of atoms obtainable with a conventional mirror-MOT. The technique makes it possible to fabricate a compact MOT apparatus by introducing the optical fibers directly into an ultrahigh-vacuum chamber.
We realized two species of magneto-optical traps (MOTs) by using linearly-polarized cooling beams. A mirror MOT was realized by using pairs of σ-π polarized cooling beams. Since the linearly-polarized field could act as opposite circular polarizations, atoms could be loaded on the mirror MOT with the elimination of one quarter-wave plate (QWP) among the four QWPs. However, for a typical MOT, counter-propagating cooling beams had to have opposite circular polarizations. The number of trapped atoms depended strongly on the polarization and optical alignment of the cooling beams when linear polarization with the elimination of one QWP was used. By using this anomalous alignment, we could increase the fluorescence of the mirror MOT. Furthermore, we were also able to realize a six-beam MOT with a configuration of pairs of orthogonal linearly-polarized cooling beams. The direction of the polarization depended strongly on the magnetic field for trapping.
A mirror magneto-optical trap (MOT) that exploits a hexapole-compensated magnetic field was developed and used in the experimental surface trapping of neutral atoms. A pair of subsidiary wires, which was placed near the main current-carrying wire, was designed to improve the uniformity of the quadrupole magnetic field and thus increased the effective capture volume of our mirror-MOT. In the experiment, the number of 87Rb^{87}\mathrm{Rb}87Rb atoms captured with our mirror-MOT was approximately twice that captured with a conventional mirror-MOT.
We describe a dynamic magneto-optical trap (MOT) suitable for the use with vacuum systems in which optical access is limited to a single window. This technique facilitates the long-standing desire of producing integrated atom chips, many of which are likely to have severely restricted optical access compared with conventional vacuum chambers. This 'switching-MOT' relies on the synchronized pulsing of optical and magnetic fields at audio frequencies. The trap's beam geometry is obtained using a planar mirror surface, and does not require a patterned substrate or bulky optics inside the vacuum chamber. Central to the design is a novel magnetic field geometry that requires no external quadrupole or bias coils which leads toward a very compact system. We have implemented the trap for 85 Rb and shown that it is capable of capturing 2 million atoms and directly cooling below the Doppler temperature.
A three-dimensional magneto-optical trap (MOT), acting as an efficient method for producing cold atoms from room-temperature atomic vapor, has been widely used to develop atomic sensors. Various compact MOTs using a single laser beam have been reported, simplifying apparatuses and leading to miniaturized devices. Here, we propose single-beam MOTs based on back-to-back pyramidal and conical mirrors. In such back-to-back mirrors, a MOT trapping volume is formed by an incident laser beam, a retroreflected beam, and multiple reflections from the mirror surfaces. We present the design of back-to-back mirrors and a series of compact MOT configurations, with the potential of increasing access to the MOT and simultaneously creating multiple MOTs. We demonstrate a MOT in a back-to-back conical mirror, loading \ensuremath{\sim}1 \ifmmode\times\else\texttimes\fi{} 107{10}^{7}107 87Rb{}^{87}\mathrm{Rb}87Rb atoms from background vapor and cooling the atoms to \ensuremath{\sim}7 \textmu{}K using polarization gradients. Single-beam MOTs based on back-to-back mirrors contribute to building compact and scalable cold-atom-based sensors.