Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Korean Physical Society

Realization of a magneto-optical trap by using linearly-polarized cooling beams

Hoon Yu, Mi Hyun Choi, Jung Bog Kim

Published May 1, 2012• 1 citation
Publisher

Abstract

We realized two species of magneto-optical traps (MOTs) by using linearly-polarized cooling beams. A mirror MOT was realized by using pairs of σ-π polarized cooling beams. Since the linearly-polarized field could act as opposite circular polarizations, atoms could be loaded on the mirror MOT with the elimination of one quarter-wave plate (QWP) among the four QWPs. However, for a typical MOT, counter-propagating cooling beams had to have opposite circular polarizations. The number of trapped atoms depended strongly on the polarization and optical alignment of the cooling beams when linear polarization with the elimination of one QWP was used. By using this anomalous alignment, we could increase the fluorescence of the mirror MOT. Furthermore, we were also able to realize a six-beam MOT with a configuration of pairs of orthogonal linearly-polarized cooling beams. The direction of the polarization depended strongly on the magnetic field for trapping.

DOI
10.3938/jkps.60.1339

Related papers

Mirror magneto-optical trap using circularly polarized light-emitting optical fibers

Masaharu Hyodo, Kazuyuki Nakayama, R. Ohmukai +2 more

A fiber-optic mirror magneto-optical trap (mirror-MOT) that uses a pair of circularly polarized light-emitting optical fibers as an optical access is demonstrated. The fiber is fabricated so that a length of birefringence fiber, designed to be a quarter wave retarder at both wavelengths of 780 and 852 nm, is attached directly onto a polarization-maintaining normal fiber. The polarization states of light emitted from the fibers are sufficiently circular for the operation of a mirror-MOT with 87Rb atoms. The mirror-MOT is able to capture approximately the same number of atoms obtainable with a conventional mirror-MOT. The technique makes it possible to fabricate a compact MOT apparatus by introducing the optical fibers directly into an ultrahigh-vacuum chamber.

Applied Optics•May 17, 2006•2 citations

Development of a magneto optical trap for Rubidium 87

Huzifa Mohammed Ahamed Mohammed Elnour

ENGLISH ABSTRACT: A Magneto Optical Trap (MOT) is a configuration formed by three orthogonal pairs of counterpropagating circularly polarized laser beams and a magnetic field gradient. A MOT is used to cool, capture and trap large numbers of atoms in vacuum at very low temperature in K range. In this thesis the development of an experimental setup for realising a MOT of 87Rb atoms is presented. The atomic structure of Rb and the theoretical background of laser cooling and magneto optical trapping was reviewed. The influence of rubidium background pressure in the vacuum system, the laser beam size and the power and frequency on the number of the trapped atoms were studied in literature. The trapping and repumping lasers were characterised experimentally. Six circularly polarised trapping beams with equal power were formed and properly aligned to intersect at the center of the trapping cell. Two optical setups were designed and exploited to investigate and optimise the trapping beam polarisation. The repumping laser beam was successfully aligned and colinearly combined into all the trapping beams. Three different experimental setups for saturated absorption spectroscopy were developed. Saturated absorption spectra showing the hyperfine structure of both 85Rb and 87Rb isotopes were measured and are discussed. Using two saturated absorption spectroscopy setups, the frequencies of both lasers were successfully locked to the trapping and repumping transitions of 87Rb respectively. A rectangular trapping cell was designed and attached to the vacuum system. A pressure of about 10­¯7 mbar was achieved. The magnetic field coils were characterised and affixed on both sides of the cell in an anti-Helmholtz configuration. Setups for imaging and quantification of the 87Rb atoms in the MOT were designed. Finally, the procedures for demonstrating a MOT are presented. In conclusion, the current status of the project is reported, with recommendations for the future work.

•Dec 1, 2013•0 citations

Construction of a Blue Neutral Cesium-133 Magneto-Optical Trap

Madison Whitmore

The magneto-optical trap (MOT) serves as the culmination of optical cooling and trapping, where by applying a linear magnetic field to orthogonal, circularly polarized, retroreflecting laser beams, one can produce a dense cloud of very cold atoms, on the order of μK. This work set out to create a magneto-optical trap using only visible light with the 6s 2S1/2 → 7p 2P◦ 3/2 transition of cesium-133, which is far weaker than the transition typically employed for a cesium-133 MOT. This transition alone has yet to be used in isolation to create a MOT, and the purpose of this work is to demonstrate the feasibility of such a MOT. While the creation of a MOT with the setup produced has thus far been unsuccessful, the components are in place for one to be made as a demonstration of optical cooling and trapping that should be visible to the naked eye. Additionally, an experimental setup was created for high precision measurements of the absolute energies of the 7p 2P◦ 1/2 and 7p 2P◦ 3/2 states. The theory behind the MOT and high precision spectroscopy is expounded upon within.

•May 1, 2025•0 citations

Basic notions of atom cooling and trapping——the Magneto-optical Trap (MOT)

Xiao Zhang

The theory of light force and the basic notions of atom cooling and trapping are discussed.The techrigue is by using a magnetic field gradient produced by a quadrupole field and three pairs of circularly polarized,counterpropagating optical beams.Then the atoms in the trap will be cooled by a dissipative force,and will be trapped in the center of the trap by a restoring force.The methods make it possible to realize BEC (BoseEinstein Condensate).

Yunnan Daxue xuebao. Shehui kexue ban•Jan 1, 2003•0 citations

Single-beam magneto-optical trap in back-to-back pyramidal and conical mirrors

Timothy H. Nguyen, Mariam Mchedlidze, Guanghui Su +3 more

A three-dimensional magneto-optical trap (MOT), acting as an efficient method for producing cold atoms from room-temperature atomic vapor, has been widely used to develop atomic sensors. Various compact MOTs using a single laser beam have been reported, simplifying apparatuses and leading to miniaturized devices. Here, we propose single-beam MOTs based on back-to-back pyramidal and conical mirrors. In such back-to-back mirrors, a MOT trapping volume is formed by an incident laser beam, a retroreflected beam, and multiple reflections from the mirror surfaces. We present the design of back-to-back mirrors and a series of compact MOT configurations, with the potential of increasing access to the MOT and simultaneously creating multiple MOTs. We demonstrate a MOT in a back-to-back conical mirror, loading \ensuremath{\sim}1 \ifmmode\times\else\texttimes\fi{} ${10}^{7}$ ${}^{87}\mathrm{Rb}$ atoms from background vapor and cooling the atoms to \ensuremath{\sim}7 \textmu{}K using polarization gradients. Single-beam MOTs based on back-to-back mirrors contribute to building compact and scalable cold-atom-based sensors.

arXiv:2507.07925•Physical Review Applied•Sep 29, 2025•5 citations

The L.H.A. 2D magneto-optical trap: on the way to a continuous beam of cold atoms

Eve Aucouturier

A continuous beam of cold atoms is considered as an alternative to improve the performance of caesium frequency standards. A two-dimensional magneto-optical trap (2D MOT) is outlined. The assembling of three counter-propagating circularly polarised laser beams and of two magnetic field gradients along the horizontal axes leads to a transverse cooling and trapping, whereas in the vertical z-direction the atoms are only cooled and not trapped because of the zero magnetic field in this direction. In order to predict the characteristics of the beam of cold atoms, a simulation of the atomic trajectories was carried out by using a two-dimensional model of Doppler cooling and magneto-optical trapping. The velocity distribution of the atoms, which, due to the trapping and cooling process, enter the zone, where they are launched, is calculated.

European Frequency and Time Forum•Jan 1, 1996•0 citations
We realized two species of magneto-optical traps (MOTs) by using linearly-polarized cooling beams. A mirror MOT was realized by using pairs of σ-π polarized cooling beams. Since the linearly-polarized field could act as opposite circular polarizations, atoms could be loaded on the mirror MOT with the elimination of one quarter-wave plate (QWP) among the four QWPs. However, for a typical MOT, counter-propagating cooling beams had to have opposite circular polarizations. The number of trapped atoms depended strongly on the polarization and optical alignment of the cooling beams when linear polarization with the elimination of one QWP was used. By using this anomalous alignment, we could increase the fluorescence of the mirror MOT. Furthermore, we were also able to realize a six-beam MOT with a configuration of pairs of orthogonal linearly-polarized cooling beams. The direction of the polarization depended strongly on the magnetic field for trapping.
A fiber-optic mirror magneto-optical trap (mirror-MOT) that uses a pair of circularly polarized light-emitting optical fibers as an optical access is demonstrated. The fiber is fabricated so that a length of birefringence fiber, designed to be a quarter wave retarder at both wavelengths of 780 and 852 nm, is attached directly onto a polarization-maintaining normal fiber. The polarization states of light emitted from the fibers are sufficiently circular for the operation of a mirror-MOT with 87Rb atoms. The mirror-MOT is able to capture approximately the same number of atoms obtainable with a conventional mirror-MOT. The technique makes it possible to fabricate a compact MOT apparatus by introducing the optical fibers directly into an ultrahigh-vacuum chamber.
ENGLISH ABSTRACT: A Magneto Optical Trap (MOT) is a configuration formed by three orthogonal pairs of counterpropagating circularly polarized laser beams and a magnetic field gradient. A MOT is used to cool, capture and trap large numbers of atoms in vacuum at very low temperature in K range. In this thesis the development of an experimental setup for realising a MOT of 87Rb atoms is presented. The atomic structure of Rb and the theoretical background of laser cooling and magneto optical trapping was reviewed. The influence of rubidium background pressure in the vacuum system, the laser beam size and the power and frequency on the number of the trapped atoms were studied in literature. The trapping and repumping lasers were characterised experimentally. Six circularly polarised trapping beams with equal power were formed and properly aligned to intersect at the center of the trapping cell. Two optical setups were designed and exploited to investigate and optimise the trapping beam polarisation. The repumping laser beam was successfully aligned and colinearly combined into all the trapping beams. Three different experimental setups for saturated absorption spectroscopy were developed. Saturated absorption spectra showing the hyperfine structure of both 85Rb and 87Rb isotopes were measured and are discussed. Using two saturated absorption spectroscopy setups, the frequencies of both lasers were successfully locked to the trapping and repumping transitions of 87Rb respectively. A rectangular trapping cell was designed and attached to the vacuum system. A pressure of about 10­¯7 mbar was achieved. The magnetic field coils were characterised and affixed on both sides of the cell in an anti-Helmholtz configuration. Setups for imaging and quantification of the 87Rb atoms in the MOT were designed. Finally, the procedures for demonstrating a MOT are presented. In conclusion, the current status of the project is reported, with recommendations for the future work.
The magneto-optical trap (MOT) serves as the culmination of optical cooling and trapping, where by applying a linear magnetic field to orthogonal, circularly polarized, retroreflecting laser beams, one can produce a dense cloud of very cold atoms, on the order of μK. This work set out to create a magneto-optical trap using only visible light with the 6s 2S1/2 → 7p 2P◦ 3/2 transition of cesium-133, which is far weaker than the transition typically employed for a cesium-133 MOT. This transition alone has yet to be used in isolation to create a MOT, and the purpose of this work is to demonstrate the feasibility of such a MOT. While the creation of a MOT with the setup produced has thus far been unsuccessful, the components are in place for one to be made as a demonstration of optical cooling and trapping that should be visible to the naked eye. Additionally, an experimental setup was created for high precision measurements of the absolute energies of the 7p 2P◦ 1/2 and 7p 2P◦ 3/2 states. The theory behind the MOT and high precision spectroscopy is expounded upon within.
A three-dimensional magneto-optical trap (MOT), acting as an efficient method for producing cold atoms from room-temperature atomic vapor, has been widely used to develop atomic sensors. Various compact MOTs using a single laser beam have been reported, simplifying apparatuses and leading to miniaturized devices. Here, we propose single-beam MOTs based on back-to-back pyramidal and conical mirrors. In such back-to-back mirrors, a MOT trapping volume is formed by an incident laser beam, a retroreflected beam, and multiple reflections from the mirror surfaces. We present the design of back-to-back mirrors and a series of compact MOT configurations, with the potential of increasing access to the MOT and simultaneously creating multiple MOTs. We demonstrate a MOT in a back-to-back conical mirror, loading \ensuremath{\sim}1 \ifmmode\times\else\texttimes\fi{} 107{10}^{7}107 87Rb{}^{87}\mathrm{Rb}87Rb atoms from background vapor and cooling the atoms to \ensuremath{\sim}7 \textmu{}K using polarization gradients. Single-beam MOTs based on back-to-back mirrors contribute to building compact and scalable cold-atom-based sensors.
A continuous beam of cold atoms is considered as an alternative to improve the performance of caesium frequency standards. A two-dimensional magneto-optical trap (2D MOT) is outlined. The assembling of three counter-propagating circularly polarised laser beams and of two magnetic field gradients along the horizontal axes leads to a transverse cooling and trapping, whereas in the vertical z-direction the atoms are only cooled and not trapped because of the zero magnetic field in this direction. In order to predict the characteristics of the beam of cold atoms, a simulation of the atomic trajectories was carried out by using a two-dimensional model of Doppler cooling and magneto-optical trapping. The velocity distribution of the atoms, which, due to the trapping and cooling process, enter the zone, where they are launched, is calculated.