Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

In-line phase-sensitive amplification of QPSK signal using multiple quasi-phase matched LiNbO_3 waveguide

Masaki Asobe, Takeshi Umeki, Hirokazu Takenouchi, Yutaka Miyamoto

Published Oct 21, 2014• 15 citations
Publisher

Abstract

Phase-sensitive amplifiers (PSA) using periodically poled (PPLN) LiNbO₃ waveguides are promising as low-noise optical amplifiers. However, it is difficult to realize in-line operation for multi-level phase modulated signals using a PPLN based PSA with the conventional configuration. In this paper, we report a PPLN based in-line PSA that can regenerate quadrature phase shift keying (QPSK) signals. Multi-stage frequency mixing in a multiple quasi-phase matched LiNbO₃waveguide allows carrier phase recovery from a QPSK signal. Non-degenerate parametric amplification enables the phase-sensitive amplification of a QPSK signal. Amplitude and phase regeneration is examined utilizing gain saturation and phase squeezing capability.

DOI
10.1364/oe.22.026642

Related papers

First demonstration of high-order QAM signal amplification in PPLN-based phase sensitive amplifier

Takeshi Umeki, Osamu Tadanaga, Masaki Asobe +2 more

We demonstrate the phase sensitive amplification of a high-order quadrature amplitude modulation (QAM) signal using non-degenerate parametric amplification in a periodically poled lithium niobate (PPLN) waveguide. The interaction between the pump, signal, and phase-conjugated idler enables us to amplify arbitrary phase components of the signal. The 16QAM signals are amplified without distortion because of the high gain linearity of the PPLN-based phase sensitive amplifier (PSA). Both the phase and amplitude noise reduction capabilities of the PSA are ensured. Phase noise cancellation is achieved by using the interaction with the phase-conjugated idler. A degraded signal-to-noise ratio (SNR) is restored by using the gain difference between a phase-correlated signal-idler pair and uncorrelated excess noise. The applicability of the simultaneous amplification of multi-carrier signals and the amplification of two independent polarization signals are also confirmed with a view to realizing ultra-high spectrally efficient signal amplification.

Optics Express•Jan 29, 2014•60 citations

Phase sensitive amplification with noise figure below the 3 dB quantum limit using CW pumped PPLN waveguide

Masaki Asobe, Takeshi Umeki, Osamu Tadanaga

The noise figure (NF) of a phase sensitive amplifier (PSA) based on a periodically poled LiNbO3 (PPLN) waveguide was evaluated in the optical and electrical domains. Phase sensitive amplification was realized using degenerate parametric amplification in the PPLN waveguide, which was pumped by the second harmonic frequency of the signal. Second harmonic pumping enables direct observation of the intrinsic amplified spontaneous emission (ASE), which determined the NF of the PSA. An NF below the 3 dB quantum limit was obtained by observing the intrinsic ASE. The low NF was also confirmed via the noise floor measurement of a cascaded PSA and erbium doped fiber amplifier in the electrical domain. The PSA was used as a preamplifier for detecting a 40 Gbit/s phase shift keying signal. The low noise characteristics were confirmed by the improved sensitivity.

Optics Express•May 25, 2012•60 citations

Phase sensitive parametric amplifiers and their applications

Joseph Kakande

Phase sensitive amplification (PSA) is a remarkably powerful tool if implemented correctly - it allows amplification with a noise figure lower than quantum mechanics normally dictates, and also allows the development of systems that coherently process the phase of their optical inputs. PSA at infrared wavelengths can be achieved using second or third order optical nonlinearities - indeed the first demonstrations of PSA utilised degenerate three photon mixing in bulk crystals, allowing the observation of effects such as quantum quadrature squeezing. This PhD research project was aimed at translating the fascinating science of PSAs into applications, based on Kerr nonlinearity in optical fibres, capable of being deployed in modern core optical networks runnning at 40 Gbit/s and higher. This objective was an integral part of the European Union FP7 project PHASORS. Studies, both theoretical and experimental, were carried out on wideband non-degenerate PSAs. The inline cascaded fiber optic parametric amplifier (FOPA), in which a first phase insensitive FOPA is used to generate phase locked signal-idler pairs, followed by a second FOPA in which PSA takes place, was used to experimentally demonstrate PSA gain characteristics in linear and saturated modes of operation, with PSA obtained over 20 nm in the telecom C-band. Focus was then re-directed towards applying a dual pump PSA to DPSK regeneration. The amplitude and phase limiting characteristics of these devices were experimentally studied, in particular revealing that amplitude saturation arises due to an interplay between input phase and nonlinear phase matching along the nonlinear fibre. This feature was used to identify a regime of operation for DPSK regeneration combining simultaneous phase and amplitude regeneration. A practical DPSK regenerator based on a degenerate dual pump phase sensitive FOPA was built. The device advanced the state of the art by incorporating a pump synthesis stage that allowed black-box operation. Detailed measurements using noise sources with varying frequency distributions in both amplitude and in phase, are presented, and the ability of the system to improve the phase and amplitude characteristics of signals at its input was verified. Also presented are results showing the regenerator installed in the middle of an 800 km dark fiber link. Finally, a novel scheme was proposed and demonstrated that utilised parametric mixing to perform arbitrary phase quantization. This relied on the coherent addition of an M-level PSK signal with a conjugated (M-1)th phase harmonic, scaled by a coefficient m, to achieve M-level phase quantization. The concept was successfully demonstrated with QPSK data signals at 56 Gbaud, as well as used to quantize lower bandwidth test signals from 2 to 6 phase levels.

•Mar 1, 2012•3 citations

Polarization-Assisted Phase-Sensitive Processor

Francesca R. Parmigiani, Graham Hesketh, Radan Slavı́k +3 more

We propose and experimentally demonstrate a phase-sensitive optical processor, capable of generating two codirectional and π-phase-shifted phase-sensitive amplifiers (PSAs) in a single device. Phase-sensitive operation is obtained by polarization mixing a phase-locked signal/idler pair generated in a degenerate dual-pump vector parametric amplifier based on four-wave mixing in a highly nonlinear fiber. We refer to this configuration as a polarization assisted PSA and demonstrate some of the applications that it may find. First, we experimentally demonstrate the regeneration of a binary phase shift keying signal in a system that requires only a very low nonlinear phase shift of 0.35 rad. Second, we decompose a quadrature phase shift keying (QPSK) signal into its in-phase and quadrature components. While application to a QPSK signal is shown in our demonstration, we demonstrate numerically that any complex modulation format signal can be decomposed using this approach. Finally, we use our processor to regenerate QPSK signals in a single nonlinear device.

Journal of Lightwave Technology•Jan 6, 2015•40 citations

Phase and Amplitude Regeneration of Differential Phase-Shift Keyed Signals Using Phase-Sensitive Amplification

Kevin Croussore, Guifang Li

Phase-sensitive amplifiers (PSAs) offer numerous advantages over phase-insensitive amplifiers in optical communications. Squeezing of optical phase through PSA can remove accumulated phase jitter, which is a critical functionality for an all- optical, phase-shift keyed network. In recent experiments, reviewed in this report, different implementations of PSA were used for phase regeneration of both return-to-zero differential phase-shift keying and nonreturn-to-zero differential phase-shift keying data. The first demonstration explored the properties and performance of PSA that occurs in nonlinear interferometers. Experiments confirmed that a PSA operating in the depleted pump regime provides simultaneous reduction of amplitude and phase noise (PN). Phase regeneration performance limit was reached as a consequence of pump-wave imperfections, which can be significantly reduced through proper design. PSA that occurs directly in fiber in a traveling-wave configuration through partially degenerate four-wave mixing was also studied. The latter implementation offers stronger phase-matched gain and suppression of amplitude-to-phase noise conversion. Technical issues that remain to be addressed are identified for each implementation. Results characterized using coherent detection offer direct measurements of the phase-regenerative behavior.

IEEE Journal of Selected Topics in Quantum Electronics•Jan 1, 2008•103 citations

Phase sensitive amplification based on cascaded SHG/DFG process in a periodically poled lithium niobate waveguide

Francesca R. Parmigiani, Kwang Jo Lee, Sheng Liu +4 more

Phase-sensitive amplifiers (PSAs) have long been known to offer the possibility of amplification with a noise figure below the 3 dB quantum limit of phase insensitive amplifiers (PIA). Other advantages of the PSAs are the potential for optical signal processing, including all optical phase regeneration of phase encoded signals, dispersion compensation and coherent wavelength exchange. PSAs are usually demonstrated using highly nonlinear fibres as the nonlinear element. However, the use of cascaded sum- and difference-frequency generation (cSFG/DFG) of second-order nonlinearities in periodically poled lithium niobate (PPLN) waveguides offers a number of attractive features relative to corresponding fibre based PSA implementations including the prospect of compact devices, large operational bandwidths and importantly a far greater immunity to the effects of Stimulated Brillouin Scattering (SBS) of the pump beams which imposes performance limitations and adds complexity to silica fibre based PSA devices. Herein, we propose and demonstrate both theoretically and experimentally a new scheme for frequency non-degenerate PSA based on the cSHG/DFG process in a single PPLN waveguide.

•Jan 1, 2009•0 citations
Phase-sensitive amplifiers (PSA) using periodically poled (PPLN) LiNbO₃ waveguides are promising as low-noise optical amplifiers. However, it is difficult to realize in-line operation for multi-level phase modulated signals using a PPLN based PSA with the conventional configuration. In this paper, we report a PPLN based in-line PSA that can regenerate quadrature phase shift keying (QPSK) signals. Multi-stage frequency mixing in a multiple quasi-phase matched LiNbO₃waveguide allows carrier phase recovery from a QPSK signal. Non-degenerate parametric amplification enables the phase-sensitive amplification of a QPSK signal. Amplitude and phase regeneration is examined utilizing gain saturation and phase squeezing capability.
We demonstrate the phase sensitive amplification of a high-order quadrature amplitude modulation (QAM) signal using non-degenerate parametric amplification in a periodically poled lithium niobate (PPLN) waveguide. The interaction between the pump, signal, and phase-conjugated idler enables us to amplify arbitrary phase components of the signal. The 16QAM signals are amplified without distortion because of the high gain linearity of the PPLN-based phase sensitive amplifier (PSA). Both the phase and amplitude noise reduction capabilities of the PSA are ensured. Phase noise cancellation is achieved by using the interaction with the phase-conjugated idler. A degraded signal-to-noise ratio (SNR) is restored by using the gain difference between a phase-correlated signal-idler pair and uncorrelated excess noise. The applicability of the simultaneous amplification of multi-carrier signals and the amplification of two independent polarization signals are also confirmed with a view to realizing ultra-high spectrally efficient signal amplification.
The noise figure (NF) of a phase sensitive amplifier (PSA) based on a periodically poled LiNbO3 (PPLN) waveguide was evaluated in the optical and electrical domains. Phase sensitive amplification was realized using degenerate parametric amplification in the PPLN waveguide, which was pumped by the second harmonic frequency of the signal. Second harmonic pumping enables direct observation of the intrinsic amplified spontaneous emission (ASE), which determined the NF of the PSA. An NF below the 3 dB quantum limit was obtained by observing the intrinsic ASE. The low NF was also confirmed via the noise floor measurement of a cascaded PSA and erbium doped fiber amplifier in the electrical domain. The PSA was used as a preamplifier for detecting a 40 Gbit/s phase shift keying signal. The low noise characteristics were confirmed by the improved sensitivity.
Phase sensitive amplification (PSA) is a remarkably powerful tool if implemented correctly - it allows amplification with a noise figure lower than quantum mechanics normally dictates, and also allows the development of systems that coherently process the phase of their optical inputs. PSA at infrared wavelengths can be achieved using second or third order optical nonlinearities - indeed the first demonstrations of PSA utilised degenerate three photon mixing in bulk crystals, allowing the observation of effects such as quantum quadrature squeezing. This PhD research project was aimed at translating the fascinating science of PSAs into applications, based on Kerr nonlinearity in optical fibres, capable of being deployed in modern core optical networks runnning at 40 Gbit/s and higher. This objective was an integral part of the European Union FP7 project PHASORS. Studies, both theoretical and experimental, were carried out on wideband non-degenerate PSAs. The inline cascaded fiber optic parametric amplifier (FOPA), in which a first phase insensitive FOPA is used to generate phase locked signal-idler pairs, followed by a second FOPA in which PSA takes place, was used to experimentally demonstrate PSA gain characteristics in linear and saturated modes of operation, with PSA obtained over 20 nm in the telecom C-band. Focus was then re-directed towards applying a dual pump PSA to DPSK regeneration. The amplitude and phase limiting characteristics of these devices were experimentally studied, in particular revealing that amplitude saturation arises due to an interplay between input phase and nonlinear phase matching along the nonlinear fibre. This feature was used to identify a regime of operation for DPSK regeneration combining simultaneous phase and amplitude regeneration. A practical DPSK regenerator based on a degenerate dual pump phase sensitive FOPA was built. The device advanced the state of the art by incorporating a pump synthesis stage that allowed black-box operation. Detailed measurements using noise sources with varying frequency distributions in both amplitude and in phase, are presented, and the ability of the system to improve the phase and amplitude characteristics of signals at its input was verified. Also presented are results showing the regenerator installed in the middle of an 800 km dark fiber link. Finally, a novel scheme was proposed and demonstrated that utilised parametric mixing to perform arbitrary phase quantization. This relied on the coherent addition of an M-level PSK signal with a conjugated (M-1)th phase harmonic, scaled by a coefficient m, to achieve M-level phase quantization. The concept was successfully demonstrated with QPSK data signals at 56 Gbaud, as well as used to quantize lower bandwidth test signals from 2 to 6 phase levels.
We propose and experimentally demonstrate a phase-sensitive optical processor, capable of generating two codirectional and π-phase-shifted phase-sensitive amplifiers (PSAs) in a single device. Phase-sensitive operation is obtained by polarization mixing a phase-locked signal/idler pair generated in a degenerate dual-pump vector parametric amplifier based on four-wave mixing in a highly nonlinear fiber. We refer to this configuration as a polarization assisted PSA and demonstrate some of the applications that it may find. First, we experimentally demonstrate the regeneration of a binary phase shift keying signal in a system that requires only a very low nonlinear phase shift of 0.35 rad. Second, we decompose a quadrature phase shift keying (QPSK) signal into its in-phase and quadrature components. While application to a QPSK signal is shown in our demonstration, we demonstrate numerically that any complex modulation format signal can be decomposed using this approach. Finally, we use our processor to regenerate QPSK signals in a single nonlinear device.
Phase-sensitive amplifiers (PSAs) offer numerous advantages over phase-insensitive amplifiers in optical communications. Squeezing of optical phase through PSA can remove accumulated phase jitter, which is a critical functionality for an all- optical, phase-shift keyed network. In recent experiments, reviewed in this report, different implementations of PSA were used for phase regeneration of both return-to-zero differential phase-shift keying and nonreturn-to-zero differential phase-shift keying data. The first demonstration explored the properties and performance of PSA that occurs in nonlinear interferometers. Experiments confirmed that a PSA operating in the depleted pump regime provides simultaneous reduction of amplitude and phase noise (PN). Phase regeneration performance limit was reached as a consequence of pump-wave imperfections, which can be significantly reduced through proper design. PSA that occurs directly in fiber in a traveling-wave configuration through partially degenerate four-wave mixing was also studied. The latter implementation offers stronger phase-matched gain and suppression of amplitude-to-phase noise conversion. Technical issues that remain to be addressed are identified for each implementation. Results characterized using coherent detection offer direct measurements of the phase-regenerative behavior.
Phase-sensitive amplifiers (PSAs) have long been known to offer the possibility of amplification with a noise figure below the 3 dB quantum limit of phase insensitive amplifiers (PIA). Other advantages of the PSAs are the potential for optical signal processing, including all optical phase regeneration of phase encoded signals, dispersion compensation and coherent wavelength exchange. PSAs are usually demonstrated using highly nonlinear fibres as the nonlinear element. However, the use of cascaded sum- and difference-frequency generation (cSFG/DFG) of second-order nonlinearities in periodically poled lithium niobate (PPLN) waveguides offers a number of attractive features relative to corresponding fibre based PSA implementations including the prospect of compact devices, large operational bandwidths and importantly a far greater immunity to the effects of Stimulated Brillouin Scattering (SBS) of the pump beams which imposes performance limitations and adds complexity to silica fibre based PSA devices. Herein, we propose and demonstrate both theoretically and experimentally a new scheme for frequency non-degenerate PSA based on the cSHG/DFG process in a single PPLN waveguide.