Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

High Q-factor and large group delay at microwave wavelengths via electromagnetically induced transparency in metamaterials

Narges Niakan, Mehdi Askari, A. Zakery

Published Aug 3, 2012• 32 citations
Publisher

Abstract

We report on our numerical work concerning a planar metamaterial exhibiting classical electromagnetically induced transparency (EIT). Using a structure with two asymmetric short strips, we demonstrate that an EIT-like resonance with a high quality factor can be achieved and this high quality factor leads to a large group index of the order of 700. The operation of metamaterial at low temperatures is anticipated to be a promising path towards low-loss metamaterials since nonradiative losses are strongly suppressed. By decreasing temperature from 300 K to 100 K, a controlled behavior with a 26% increase in the quality factor of the resonance and an 85% increase in the group index was observed.

DOI
10.1364/josab.29.002329

Related papers

Large group delay in a microwave metamaterial analog of electromagnetically induced transparency

Lei Zhang, Philippe Tassin, Thomas Koschny +3 more

We report on our experimental work concerning a planar metamaterial exhibiting classical electromagnetically induced transparency (EIT). Using a structure with two mirrored split-ring resonators as the dark element and a cut wire as the radiative element, we demonstrate that an EIT-like resonance can be achieved without breaking the symmetry of the structure. The mirror symmetry of the metamaterial’s structural element results in a selection rule inhibiting magnetic dipole radiation for the dark element, and the increased quality factor leads to low absorption (<10%) and large group index (of the order of 30).

arXiv:1010.2976•Applied Physics Letters•Dec 13, 2010•166 citations

Electromagnetically Induced Transparency in an All-Dielectric Metamaterial-Waveguide With Large Group Index

Chuanshuai Sui, Bingxin Han, Tingting Lang +3 more

We investigate numerically an analog of electromagnetically induced transparency (EIT) in an all-dielectric metamaterial-waveguide (ADMW) that consists of a two-dimensional silicon rod array on quartz slab waveguide. The EIT-like response is achieved by the destructive interference between a broad magnetic resonance and a narrow guide mode resonance. By tailoring the guided mode through the thickness of the slab waveguide or the lattice period of the metamaterial, an EIT-like transmission window is achieved with both high Q-factor (>104) and high transmission (>94%). And the group refractive index at the EIT-like resonance of the ADMW can be up to several thousands. These results demonstrate that the proposed ADMW has potential applications in low-loss slow-light based devices, bio-chemical sensing, and optical modulations.

IEEE photonics journal•Jul 17, 2017•23 citations

Comparison of Electromagnetically Induced Transparency Performance in Metallic and All-Dielectric Metamaterials

Jie Hu, Tingting Lang, Zhi Hong +2 more

Analogs of Electromagnetically Induced Transparency (EIT) in metamaterial have undoubtedly become a research hotspot in recent years. In this paper, we summarized some of the literature on EIT published to date and compared their performance. Then, we designed two kinds of metamaterials using aluminum and silicon. Both have the similar glasses-shaped structure of a periodic lattice with one bar resonator and two split ring resonators. We analyzed and compared the EIT performance in the near infrared waveband of these two metamaterials. The metallic EIT metamaterials with large radiation loss and ohmic heat loss have a smaller Q-factor than the dielectric counterpart with less energy loss, while having a higher sensitivity toward the ambient refractive index. The Q-factor of our designed aluminum metamaterial and silicon metamaterial are 10.06 and 412.6, respectively. Their sensitivities are 1642.97 nm/RIU and 433.05 nm/RIU, respectively, which are higher than most of their counterparts in the same waveband in the other literature. For the application of slow light, the dielectric metamaterials with higher Q-factor are far superior to the metallic metamaterials in the same waveband and comparable propagation distance. The group index of the aluminum metamaterial is 42.9, and the group delay is 0.01 ps in the near infrared waveband. For the silicon metamaterial, the group index is approximately 1907.1, and the group delay is 0.89 ps within the transmission window in the near infrared waveband; these values are both higher than most counterparts in the same waveband in other literature. The EIT metamaterials that we designed have excellent performance, and to the best of our knowledge, this paper presents the first detailed comparison of EIT metamaterials made of dielectric and metal with similar structure; this paper may have certain instructive meaning for further research on metamaterial analogues of EIT in the future.

Journal of Lightwave Technology•Feb 9, 2018•83 citations

Manipulation of electromagnetically-induced transparency in planar metamaterials based on phase coupling

Xing-Ri Jin, Yuehui Lu, Jinwoo Park +7 more

We experimentally demonstrated a controllable electromagnetically induced transparency (EIT)-like spectral response at microwave frequencies in a planar metamaterial consisting of two identical split-ring resonators (SRRs) with side-by-side symmetry. In our scheme, phase coupling between the two SRRs (serving as the bright mode), which were excited strongly by the incident wave, was employed, and it was found that the EIT-like spectral response could be controlled by simply adjusting the incident angle. Thus, our scheme may be used for electromagnetic-wave switching. A high group index for slow-light application and a high quality factor could be obtained by simply controlling the incident angle.

Journal of Applied Physics•Apr 1, 2012•46 citations

An analog of double electromagnetically induced transparency with extremely high group indexes

杨安, YAN Chun, 田洁冰 +3 more

An asymmetric metamaterial exhibiting an analog of double electromagnetically induced transparency(EIT) in the middle-infrared region is reported.The metamaterial consists of two-layered arrays of Ushaped rings embedded in a medium,with the lower layer rotated by 90°.Our simulations demonstrate that both maximum group indexes are extremely high at the two EIT-like positions.The group index reaches about thrice the currently reported maximum value at the high-frequency EIT-like position.The transmittance at the two transparency positions also possesses extremely high Q factors,which is conducive to controlling the propagation of electromagnetic waves.

Chinese Optics Letters•Jan 1, 2013•0 citations

A planar metamaterial design for electromagnetically induced transparency

ُ S Ahmadi, Ali Rezaei-Latifi

Electromagnetically induced transparency is an optical phenomenon that is characterized by the elimination of the effect of a medium on a propagating beam of electromagnetic radiation in a specific frequency band. In this study, EIT was investigated at a proposed metamaterial with the dimensions milimeter and in the area of frequency of GHz. The computation results indicated that EIT with high transmission rate and high Q factor occurs in certain frequencies by breaking the symmetry in this structure. The sensitivity studies showed that the use of silver in the structure increases the quality factor so significantly that this quantity reaches 338 for gold and copper, while it reaches 677 for silver. In addition, By reducing the temperature, the transmission rate in the structure increases and reaches acceptable degree 98%. This structure can be an appropriate option for slow light usages, and it can be utilized for light amplification in microwave structures.

•Jun 1, 2018•0 citations
We report on our numerical work concerning a planar metamaterial exhibiting classical electromagnetically induced transparency (EIT). Using a structure with two asymmetric short strips, we demonstrate that an EIT-like resonance with a high quality factor can be achieved and this high quality factor leads to a large group index of the order of 700. The operation of metamaterial at low temperatures is anticipated to be a promising path towards low-loss metamaterials since nonradiative losses are strongly suppressed. By decreasing temperature from 300 K to 100 K, a controlled behavior with a 26% increase in the quality factor of the resonance and an 85% increase in the group index was observed.
We report on our experimental work concerning a planar metamaterial exhibiting classical electromagnetically induced transparency (EIT). Using a structure with two mirrored split-ring resonators as the dark element and a cut wire as the radiative element, we demonstrate that an EIT-like resonance can be achieved without breaking the symmetry of the structure. The mirror symmetry of the metamaterial’s structural element results in a selection rule inhibiting magnetic dipole radiation for the dark element, and the increased quality factor leads to low absorption (<10%) and large group index (of the order of 30).
We investigate numerically an analog of electromagnetically induced transparency (EIT) in an all-dielectric metamaterial-waveguide (ADMW) that consists of a two-dimensional silicon rod array on quartz slab waveguide. The EIT-like response is achieved by the destructive interference between a broad magnetic resonance and a narrow guide mode resonance. By tailoring the guided mode through the thickness of the slab waveguide or the lattice period of the metamaterial, an EIT-like transmission window is achieved with both high Q-factor (>104) and high transmission (>94%). And the group refractive index at the EIT-like resonance of the ADMW can be up to several thousands. These results demonstrate that the proposed ADMW has potential applications in low-loss slow-light based devices, bio-chemical sensing, and optical modulations.
Analogs of Electromagnetically Induced Transparency (EIT) in metamaterial have undoubtedly become a research hotspot in recent years. In this paper, we summarized some of the literature on EIT published to date and compared their performance. Then, we designed two kinds of metamaterials using aluminum and silicon. Both have the similar glasses-shaped structure of a periodic lattice with one bar resonator and two split ring resonators. We analyzed and compared the EIT performance in the near infrared waveband of these two metamaterials. The metallic EIT metamaterials with large radiation loss and ohmic heat loss have a smaller Q-factor than the dielectric counterpart with less energy loss, while having a higher sensitivity toward the ambient refractive index. The Q-factor of our designed aluminum metamaterial and silicon metamaterial are 10.06 and 412.6, respectively. Their sensitivities are 1642.97 nm/RIU and 433.05 nm/RIU, respectively, which are higher than most of their counterparts in the same waveband in the other literature. For the application of slow light, the dielectric metamaterials with higher Q-factor are far superior to the metallic metamaterials in the same waveband and comparable propagation distance. The group index of the aluminum metamaterial is 42.9, and the group delay is 0.01 ps in the near infrared waveband. For the silicon metamaterial, the group index is approximately 1907.1, and the group delay is 0.89 ps within the transmission window in the near infrared waveband; these values are both higher than most counterparts in the same waveband in other literature. The EIT metamaterials that we designed have excellent performance, and to the best of our knowledge, this paper presents the first detailed comparison of EIT metamaterials made of dielectric and metal with similar structure; this paper may have certain instructive meaning for further research on metamaterial analogues of EIT in the future.
We experimentally demonstrated a controllable electromagnetically induced transparency (EIT)-like spectral response at microwave frequencies in a planar metamaterial consisting of two identical split-ring resonators (SRRs) with side-by-side symmetry. In our scheme, phase coupling between the two SRRs (serving as the bright mode), which were excited strongly by the incident wave, was employed, and it was found that the EIT-like spectral response could be controlled by simply adjusting the incident angle. Thus, our scheme may be used for electromagnetic-wave switching. A high group index for slow-light application and a high quality factor could be obtained by simply controlling the incident angle.
An asymmetric metamaterial exhibiting an analog of double electromagnetically induced transparency(EIT) in the middle-infrared region is reported.The metamaterial consists of two-layered arrays of Ushaped rings embedded in a medium,with the lower layer rotated by 90°.Our simulations demonstrate that both maximum group indexes are extremely high at the two EIT-like positions.The group index reaches about thrice the currently reported maximum value at the high-frequency EIT-like position.The transmittance at the two transparency positions also possesses extremely high Q factors,which is conducive to controlling the propagation of electromagnetic waves.
Electromagnetically induced transparency is an optical phenomenon that is characterized by the elimination of the effect of a medium on a propagating beam of electromagnetic radiation in a specific frequency band. In this study, EIT was investigated at a proposed metamaterial with the dimensions milimeter and in the area of frequency of GHz. The computation results indicated that EIT with high transmission rate and high Q factor occurs in certain frequencies by breaking the symmetry in this structure. The sensitivity studies showed that the use of silver in the structure increases the quality factor so significantly that this quantity reaches 338 for gold and copper, while it reaches 677 for silver. In addition, By reducing the temperature, the transmission rate in the structure increases and reaches acceptable degree 98%. This structure can be an appropriate option for slow light usages, and it can be utilized for light amplification in microwave structures.