Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Controlled coupling of single color centers to a photonic crystal cavity in monocrystalline diamond

Janine Riedrich‐Möller, Sébastien Pezzagna, Jan Meijer, Martin Fischer, S. Gsell, M. Schreck, Christoph Becher

Published May 1, 2013• 1 citation
Publisher

Abstract

Summary form only given. Deterministic coupling of a single emitter to a photonic crystal cavity is an important step towards the realization of integrated solid-state devices for quantum photonics. As single emitters, color centers in diamond, e.g. the Nitrogen-Vacancy (NV) center or the Silicon-Vacancy (SiV) center have attracted significant interest due to their extraordinary properties like long spin-coherence times or narrowband and bright single photon emission, respectively. For the realization of recent proposals like cavity-enhanced spin measurements or cavity-enhanced single photon sources, it is necessary to couple single color centers to a cavity with small mode volume and high quality factor. Photonic crystal cavities directly fabricated within a monocrystalline diamond membrane are well suited for this task, as they offer tiny mode volumes for efficient emitter-cavity coupling as well as scalable architectures for integrated photonic devices.In order to achieve controlled coupling of a color center to a photonic crystal cavity, several challenges have to be tackled, e.g. exact emitter positioning and alignment of its dipole moment with the cavity electric field as well as the ability for cavity tuning. For deterministic emitter-cavity positioning, two different routes can be pursued: In the first approach, a single emitter is localized within the diamond, its dipole orientation is determined and the cavity is subsequently structured around it. In the second approach, the cavity is fabricated first and a single color center is created within the cavity, e.g. via ion implantion or creation of vacancies. Here we present strategies to realize both methods for deterministic emitter-cavity coupling. For the first approach, we use a monocrystalline diamond film containing single SiV centers. Figure 1a) shows a fluorescence scan of a single SiV center with position markers next to it. The position markers are subsequently used to structure a photonic crystal cavity around the color center using focused ion beam milling [1]. Figures 1b) and c) show SEMimages before and after the cavity fabrication. The photonic crystal lattice constant a ≈ 283nm is chosen such that the cavity modes are red shifted with respect to the SiV emission lines. Using an oxidation tuning method, the cavity modes are tuned into resonance with the zero-phonon line at 740nm of a single SiV center (see Fig. 1d)). On resonance, we measure an intensity enhancement by a factor of 3.8 compared to the off-resonant case.

DOI
10.1109/cleoe-iqec.2013.6801899

Related papers

Deterministic Coupling of a Single Silicon-Vacancy Color Center to a Photonic Crystal Cavity in Diamond

Janine Riedrich‐Möller, Carsten Arend, Christoph Pauly +5 more

Deterministic coupling of single solid-state emitters to nanocavities is the key for integrated quantum information devices. We here fabricate a photonic crystal cavity around a preselected single silicon-vacancy color center in diamond and demonstrate modification of the emitters internal population dynamics and radiative quantum efficiency. The controlled, room-temperature cavity coupling gives rise to a resonant Purcell enhancement of the zero-phonon transition by a factor of 19, coming along with a 2.5-fold reduction of the emitter's lifetime.

arXiv:1408.1803•Nano Letters•Aug 11, 2014•161 citations

Deterministic coupling of delta-doped nitrogen vacancy centers to a nanobeam photonic crystal cavity

Jonathan C. Lee, David O. Bracher, Shanying Cui +11 more

The negatively charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement of NVs within the cavity. Here, we report photonic crystal nanobeam cavities coupled to NVs incorporated by a delta-doping technique that allows nanometer-scale vertical positioning of the emitters. We demonstrate cavities with Q up to ∼24 000 and mode volume V ∼ 0.47(λ/n)3 as well as resonant enhancement of the ZPL of an NV ensemble with Purcell factor of ∼20. Our fabrication technique provides a first step towards deterministic NV-cavity coupling using spatial control of the emitters.

arXiv:1411.0725•Applied Physics Letters•Dec 29, 2014•90 citations

An integrated diamond nanophotonics platform for quantum optics

Ruffin E. Evans, Денис Дмитриевич Сукачев, Christian N. Nguyen +7 more

Efficient interfaces between optical photons and quantum bits are fundamental building blocks for quantum networks and large-scale quantum computers. We demonstrate an integrated platform for scalable quantum optics based on color centers coupled to diamond nanodevices. First, we incorporate nitrogen-vacancy (NV) centers in diamond into hybrid nanophotonic crystal cavities. Despite our progress towards coupling the NV to cavity photons, we find that the NV-cavity interface is limited by the imperfections of the color center's properties and its local environment. We approach this challenge first by characterizing and modifying the diamond surface to reduce the environmental noise affecting the NV optical transition. Subsequently, we develop a new approach that makes use of a quantum emitter with intrinsic protection from this noise: the silicon-vacancy (SiV) center in diamond. We demonstrate that SiV centers introduced through ion implantation feature highly coherent optical transitions, even inside nanostructures. By placing SiV centers inside all-diamond photonic crystal cavities, we achieve strong SiV-photon coupling with a cooperativity of greater than 20. Using this platform, we realize a quantum-optical switch controlled by the spin degree of freedom of a single SiV. By measuring intensity correlations of indistinguishable Raman photons emitted into a single waveguide, we observe a quantum interference effect resulting from the superradiant emission of two probabilistically entangled SiV centers. Finally, we demonstrate controllable photon-mediated interactions between the spin degrees of freedom of two cavity-coupled SiV centers. When the optical transitions of the two SiV centers are tuned into resonance, the coupling of each SiV to the common cavity mode results in a coherent interaction between the two SiVs, leading to the observation of super- and sub-radiant two-SiV states.

Bulletin of the American Physical Society•Mar 9, 2018•0 citations

Scalable fabrication of coupled NV center - photonic crystal cavity systems by self-aligned N ion implantation

Tim Schröder, Michael E. Walsh, Jiabao Zheng +8 more

Towards building large-scale integrated photonic systems for quantum information processing, spatial and spectral alignment of single quantum systems to photonic nanocavities is required. Here, we demonstrate spatially targeted implantation of nitrogen vacancy (NV) centers into the mode maximum of 2-d diamond photonic crystal cavities with quality factors up to 8000, achieving an average of 1:1 0:2 NVs per cavity. Nearly all NV-cavity systems have significant emission intensity enhancement, reaching a cavity-fed spectrally selective intensity enhancement, Fint, of up to 93. Although spatial NV-cavity overlap is nearly guaranteed within about 40 nm, spectral tuning of the NV’s zero-phonon-line (ZPL) is still necessary after fabrication. To demonstrate spectral control, we temperature tune a cavity into an NV ZPL, yielding FZPL int ~ 5 at cryogenic temperatures.

Optical Materials Express•Apr 6, 2017•35 citations

Coupling of silicon-vacancy centers to a single crystal diamond cavity

Jonathan C. Lee, Igor Aharonovich, Andrew P. Magyar +2 more

Optical coupling of an ensemble of silicon-vacancy (SiV) centers to single-crystal diamond microdisk cavities is demonstrated. The cavities are fabricated from a single-crystal diamond membrane generated by ion implantation and electrochemical liftoff followed by homo-epitaxial overgrowth. Whispering gallery modes spectrally overlap with the zero-phonon line (ZPL) of the SiV centers and exhibit quality factors ∼ 2200. Lifetime reduction from 1.8 ns to 1.48 ns is observed from SiV centers in the cavity compared to those in the membrane outside the cavity. These results are pivotal in developing diamond integrated photonics networks.

arXiv:1111.6852•Optics Express•Apr 2, 2012•74 citations

Photonic Crystal Coupled to N-V Center in Diamond

Luca Marseglia

In this work we aim to exploit one of the most studied defect color centers in diamond , the negatively charged nitrogen vacancy (NV -) color center, a three level system which emits a single photon at a wavelength of 637nm providing a possible deterministic single photon emitter very useful for quantum computing applications.Moreover the possibility of placing aNV -in a photonic crystal cavity will enhance the coupling between photons and NV -center.This could also allow us to address the ground state of the NV -center, whose spin, could be used as qubit.It is also remarkable to notice that for quantum computing purposes it is very useful to increase the light collection from the NV -centers, and in order to do that we performed a study of another structure, the solid immersion lens, which consists of an hemisphere whose center is at the position of an emitter, in this case the NV -center, increasing the collection of the light from it.In order to create these structures we used a method called focused ion beam which allowed us to etch directly into the diamond many different kinds of structures.In order to allow an interaction between these structures and the NV -centers we need to have a method to locate the NV -center precisely under the etched structures.We developed a new technique (Marseglia et al. (2011)) where we show how to mark a single NV -center and how to etch a desired structure over it on demand.This technique gave very good results allowing us to etch a solid immersion lens onto a NV -previously located and characterized, increasing the light collection from the NV -of a factor of 8×.

InTech eBooks•Mar 30, 2012•0 citations
Summary form only given. Deterministic coupling of a single emitter to a photonic crystal cavity is an important step towards the realization of integrated solid-state devices for quantum photonics. As single emitters, color centers in diamond, e.g. the Nitrogen-Vacancy (NV) center or the Silicon-Vacancy (SiV) center have attracted significant interest due to their extraordinary properties like long spin-coherence times or narrowband and bright single photon emission, respectively. For the realization of recent proposals like cavity-enhanced spin measurements or cavity-enhanced single photon sources, it is necessary to couple single color centers to a cavity with small mode volume and high quality factor. Photonic crystal cavities directly fabricated within a monocrystalline diamond membrane are well suited for this task, as they offer tiny mode volumes for efficient emitter-cavity coupling as well as scalable architectures for integrated photonic devices.In order to achieve controlled coupling of a color center to a photonic crystal cavity, several challenges have to be tackled, e.g. exact emitter positioning and alignment of its dipole moment with the cavity electric field as well as the ability for cavity tuning. For deterministic emitter-cavity positioning, two different routes can be pursued: In the first approach, a single emitter is localized within the diamond, its dipole orientation is determined and the cavity is subsequently structured around it. In the second approach, the cavity is fabricated first and a single color center is created within the cavity, e.g. via ion implantion or creation of vacancies. Here we present strategies to realize both methods for deterministic emitter-cavity coupling. For the first approach, we use a monocrystalline diamond film containing single SiV centers. Figure 1a) shows a fluorescence scan of a single SiV center with position markers next to it. The position markers are subsequently used to structure a photonic crystal cavity around the color center using focused ion beam milling [1]. Figures 1b) and c) show SEMimages before and after the cavity fabrication. The photonic crystal lattice constant a ≈ 283nm is chosen such that the cavity modes are red shifted with respect to the SiV emission lines. Using an oxidation tuning method, the cavity modes are tuned into resonance with the zero-phonon line at 740nm of a single SiV center (see Fig. 1d)). On resonance, we measure an intensity enhancement by a factor of 3.8 compared to the off-resonant case.
Deterministic coupling of single solid-state emitters to nanocavities is the key for integrated quantum information devices. We here fabricate a photonic crystal cavity around a preselected single silicon-vacancy color center in diamond and demonstrate modification of the emitters internal population dynamics and radiative quantum efficiency. The controlled, room-temperature cavity coupling gives rise to a resonant Purcell enhancement of the zero-phonon transition by a factor of 19, coming along with a 2.5-fold reduction of the emitter's lifetime.
The negatively charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement of NVs within the cavity. Here, we report photonic crystal nanobeam cavities coupled to NVs incorporated by a delta-doping technique that allows nanometer-scale vertical positioning of the emitters. We demonstrate cavities with Q up to ∼24 000 and mode volume V ∼ 0.47(λ/n)3 as well as resonant enhancement of the ZPL of an NV ensemble with Purcell factor of ∼20. Our fabrication technique provides a first step towards deterministic NV-cavity coupling using spatial control of the emitters.
Efficient interfaces between optical photons and quantum bits are fundamental building blocks for quantum networks and large-scale quantum computers. We demonstrate an integrated platform for scalable quantum optics based on color centers coupled to diamond nanodevices. First, we incorporate nitrogen-vacancy (NV) centers in diamond into hybrid nanophotonic crystal cavities. Despite our progress towards coupling the NV to cavity photons, we find that the NV-cavity interface is limited by the imperfections of the color center's properties and its local environment. We approach this challenge first by characterizing and modifying the diamond surface to reduce the environmental noise affecting the NV optical transition. Subsequently, we develop a new approach that makes use of a quantum emitter with intrinsic protection from this noise: the silicon-vacancy (SiV) center in diamond. We demonstrate that SiV centers introduced through ion implantation feature highly coherent optical transitions, even inside nanostructures. By placing SiV centers inside all-diamond photonic crystal cavities, we achieve strong SiV-photon coupling with a cooperativity of greater than 20. Using this platform, we realize a quantum-optical switch controlled by the spin degree of freedom of a single SiV. By measuring intensity correlations of indistinguishable Raman photons emitted into a single waveguide, we observe a quantum interference effect resulting from the superradiant emission of two probabilistically entangled SiV centers. Finally, we demonstrate controllable photon-mediated interactions between the spin degrees of freedom of two cavity-coupled SiV centers. When the optical transitions of the two SiV centers are tuned into resonance, the coupling of each SiV to the common cavity mode results in a coherent interaction between the two SiVs, leading to the observation of super- and sub-radiant two-SiV states.
Towards building large-scale integrated photonic systems for quantum information processing, spatial and spectral alignment of single quantum systems to photonic nanocavities is required. Here, we demonstrate spatially targeted implantation of nitrogen vacancy (NV) centers into the mode maximum of 2-d diamond photonic crystal cavities with quality factors up to 8000, achieving an average of 1:1 0:2 NVs per cavity. Nearly all NV-cavity systems have significant emission intensity enhancement, reaching a cavity-fed spectrally selective intensity enhancement, Fint, of up to 93. Although spatial NV-cavity overlap is nearly guaranteed within about 40 nm, spectral tuning of the NV’s zero-phonon-line (ZPL) is still necessary after fabrication. To demonstrate spectral control, we temperature tune a cavity into an NV ZPL, yielding FZPL int ~ 5 at cryogenic temperatures.
Optical coupling of an ensemble of silicon-vacancy (SiV) centers to single-crystal diamond microdisk cavities is demonstrated. The cavities are fabricated from a single-crystal diamond membrane generated by ion implantation and electrochemical liftoff followed by homo-epitaxial overgrowth. Whispering gallery modes spectrally overlap with the zero-phonon line (ZPL) of the SiV centers and exhibit quality factors ∼ 2200. Lifetime reduction from 1.8 ns to 1.48 ns is observed from SiV centers in the cavity compared to those in the membrane outside the cavity. These results are pivotal in developing diamond integrated photonics networks.
In this work we aim to exploit one of the most studied defect color centers in diamond , the negatively charged nitrogen vacancy (NV -) color center, a three level system which emits a single photon at a wavelength of 637nm providing a possible deterministic single photon emitter very useful for quantum computing applications.Moreover the possibility of placing aNV -in a photonic crystal cavity will enhance the coupling between photons and NV -center.This could also allow us to address the ground state of the NV -center, whose spin, could be used as qubit.It is also remarkable to notice that for quantum computing purposes it is very useful to increase the light collection from the NV -centers, and in order to do that we performed a study of another structure, the solid immersion lens, which consists of an hemisphere whose center is at the position of an emitter, in this case the NV -center, increasing the collection of the light from it.In order to create these structures we used a method called focused ion beam which allowed us to etch directly into the diamond many different kinds of structures.In order to allow an interaction between these structures and the NV -centers we need to have a method to locate the NV -center precisely under the etched structures.We developed a new technique (Marseglia et al. (2011)) where we show how to mark a single NV -center and how to etch a desired structure over it on demand.This technique gave very good results allowing us to etch a solid immersion lens onto a NV -previously located and characterized, increasing the light collection from the NV -of a factor of 8×.