The theory of superconducting phase qubits---also known as current-biased Josephson junctions---is presented. In the first part of this thesis, I introduce quantum computation, quantum simulation, and their deep connection with symplectic integration. I then consider the fundamental many-body theory of superconductivity and Josephson junctions and show how the quantum dynamics of a single macroscopic degree of freedom, the gauge invariant phase difference, emerges. A complete study of the Hilbert space structure of such a variable is performed for the current-biased junction. The resulting resonance structure is studied in detail, using various formalisms including the WKB approximation, instanton methods, the complex scaling transformation, basis set stabilization, numerical integration, and dynamical simulation using Lie algebraic wave-packet propagation. The second part of this thesis explores how the current-biased junction can be used as an element of a quantum computer---a quantum bit (qubit). Single qubit operations are studied, followed by the presentation of the theory of coupled qubit devices. My key result is the design and optimization of quantum logic gates with high fidelity (F ~ 0.9999) for capacitively coupled phase qubits with short gate times (~ 10 ns). Finally, I examine an advanced qubit-coupling scheme, a resonant coupling method utilizing a harmonic oscillator as the auxiliary degree of freedom. The models and methods presented here have been developed in direct collaboration with an experimental program. These experiments are the first to show spectroscopic evidence for entanglement between two and three macroscopic degrees of freedom in a superconducting circuit.
This thesis examines Josephson tunnel junctions as candidate qubits for quantum computation. A large area current-biased junction, known as a phase qubit, uses the two lowest energy levels in a tilted washboard potential as the qubit states |0> and |1>. I performed experiments with 10 x 10 um^2 Nb/AlOx/Nb qubit junctions, with critical currents of roughly 30 uA. The state of a device was initialized by cooling below 50 mK in a dilution refrigerator. In order for quantum mechanical superpositions to be long-lived, it is necessary to isolate the junction from noisy bias leads that originate at room temperature. I studied two types of isolation: an LC filter, and a broadband scheme that used an auxiliary junction, resulting in a dc SQUID. One of the main goals of this work was to determine how well a simple Hamiltonian, derived assuming just a few lumped elements, describes the observed behavior of a macroscopic Josephson device, including coherent dynamics such as Rabi oscillations. I did this by comparing results to the expected behavior of ideal two-level systems and with more detailed master equation and density matrix simulations. I performed state manipulation by applying dc bias currents and resonant microwave currents, and through temperature control. The tunneling escape rate of the junction from the states |0> and |1> (zero voltage) to the running state (finite voltage) depends on the occupation probability of the energy levels and served as state readout. Experiments to measure the relaxation time T1 between |1> and |0> were performed by examining the dependence of the escape rate with temperature, yielding a maximum T1 = 15 ns. Measuring the decay to the ground state after applying a microwave pulse revealed at least two time constants, one of about 10 ns and another as long as 50 ns. The spectroscopic coherence time T2* was estimated to be roughly 5 ns by measuring resonance widths and the decay envelope of coherent Rabi oscillations was found to have a time constant T' = 10 ns over a wide range of conditions.
This work concerns the study of Josephson junction circuits in the context of their usability for quantum computing. The zero-voltage state of a current-biased Josephson junction has a set of metastable quantum energy levels. If a junction is well isolated from its environment, it will be possible to use the two lowest states as a qubit in a quantum computer. I first examine the meaning of isolation theoretically. Using a master equation, I analyzed the effect of dissipation on escape rates and suggested a simple method, population depletion technique, to measure the relaxation time. Using a stochastic Bloch equation to analyze microwave resonance shapes, I found a relation between current noise induced decoherence and the noise spectrum. I then analyze and test a few qubit isolation schemes, including resistive isolation, inductor-capacitor (LC) isolation, and inductor-junction (LJ) isolation. I found the resistive isolation scheme has a severe heating problem. Macroscopic quantum tunneling and energy level quantization were observed in the LC isolated junction qubits at 25 mK. Relaxation times of 4-12 ns and spectroscopic coherence times of 1-3 ns were obtained for these LC isolated qubits. I measured a relaxation time of 50 ns and a spectroscopic coherence time of 5-8 ns for the LJ isolated junction qubit. Both times are much longer than those of the LC isolated qubits. Rabi oscillations were also observed on this sample with a decay time of around 10 ns. Using microwave spectroscopy techniques, I probed quantum phenomena in a coupled macroscopic three-qubit system that is comprised of two Nb/AlOx/Nb Josephson junctions and an LC resonator. The measured spectrum at 25 mK in the frequency range 4-15 GHz agrees well with quantum mechanical calculations, consistent with the existence of entangled states between the three degrees of freedom. These entangled states and a first-order strong coupling between two junction qubits open the possibility of using a resonator as a data bus for information storage and manipulation in a multi-qubit system. The measurements also demonstrate spectroscopy is a powerful tool and can be used to study a composite system with many qubits.
A quantum computer is an information processing machine, much like an ordinary classical computer, but its function is based on quantum mechanical principles. To be able to construct such a machine would be a fantastic accomplishment---to have total control over a quantum system is a dream for both physicists and science-fiction enthusiasts. The basic information unit in a quantum computer is the quantum bit, or qubit for short. A quantum computer consists of many coupled qubits. To get a single qubit to work properly, would be a major step towards building this machine. Here we study two different qubit ideas. The central element in both setups is the superconducting tunnel junction---the Josephson junction. By connecting the Josephson junctions to standard electronics in a clever way, a qubit can be realised. With these constructions it is in principle very easy to manipulate and read out the quantum probabilities, by varying voltages and currents in time. However, this ease of manipulation has a cost: strong interactions with uncontrolled degrees of freedom of the environment transfer information from the qubit. For superconducting qubits this decoherence is typically very fast. There are ways to deal with the decoherence. One way is to tune the circuit parameters so that the decoherence becomes minimal. Another way is to engineer the qubits so fast so that the effect of decoherence becomes small. In this thesis, we will apply both these strategies. Specifically, the measurement speed of the second qubit we study, turns out to be very sensitive to the topology of the phase space of the detector variables.
Josephson junctions are the central nonlinear element of superconducting qubits, yet their standard description is reached through a chain of approximations. We propose a purely quantum-mechanical model of the junction, formulated directly in Hilbert space: a charged particle moves on a one-dimensional loop, and the junction is a point at which the wave function obeys self-adjoint boundary conditions, labelled by a coupling strength
λ, which controls the transparency of the junction, and a phase jump
δ, which plays the role of the superconducting phase difference. For a loop with a single junction we solve the spectral problem and show that the ground-state momentum expectation, identified with the supercurrent, factorises exactly as
⟨p^0⟩=Ic(δ,λ)sinδ. For opaque junctions
Ic becomes independent of
δ and the first Josephson relation
I=Icsinδ is recovered; for strongly attractive coupling, where the ground state is bound to the junction, the
sinδ law is also recovered, but with an exponentially suppressed amplitude. For more transparent junctions, however, the model \emph{predicts} deviations from the pure
sinδ law:
Ic acquires a dependence on
δ already at order
λ−2, compatible with the higher Josephson harmonics recently found necessary to describe superconducting qubit spectra, and a fully transparent contact yields a current linear in
δ. When the phase varies in time, a gauge transformation shows that the voltage drop across the junction is proportional to
δ˙, so that the second Josephson relation emerges without being imposed. The boundary-condition approach thus reproduces both Josephson relations from first principles and predicts corrections to them, offering a route towards higher-fidelity models of superconducting qubits.
Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.