Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Vehicular Technology Conference

Power Allocation for Cooperative Jamming in Amplify-and-Forward Relaying Network with Eavesdropper

Yongyun Choi, Jae Hong Lee

Published May 1, 2015• 2 citations
Publisher

Abstract

In this paper, we propose an optimal source power allocation scheme for a two-hop amplify-and-forward relaying network with cooperative jamming where a source and destination transmit jamming signals. For the full CSI of all link and the CSI for desired link, the source power is optimally splitted to minimize the secrecy outage probability. Simulation results show that the proposed power allocation scheme improves the secrecy rate and reliability.

DOI
10.1109/vtcspring.2015.7146021

Related papers

On the Jamming Power Allocation for Secure Amplify-and-Forward Relaying via Cooperative Jamming

Ki‐Hong Park, Tian Wang, Mohamed‐Slim Alouini

In this paper, we investigate secure communications in two-hop wireless relaying networks with one eavesdropper. To prevent the eavesdropper from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as cooperative jamming. This jamming noise helps protecting the source message from being captured reliably at the eavesdropper, while the destination cancels its self-intended noise. According to the channel information available at the destination, we derive three jamming power allocation strategies to minimize the outage probability of the secrecy rate. In addition, we derive analytic results quantifying the jamming power consumption of the proposed allocation methods.

IEEE Journal on Selected Areas in Communications•Aug 23, 2013•148 citations

Cooperative jamming power control to enhance secrecy communications of AF Relaying systems for Rayleigh fading channel

Ki‐Hong Park, Mohamed‐Slim Alouini

In this paper, we investigate secrecy communications in two-hop wireless relaying networks which consist of one source, one amplify-and-forward (AF) relay, one legitimate destination, and one eavesdropper. To prevent the eavesdropper from intercepting the source message, we make the destination send the intended noise to the AF relay during the first phase. This is referred to as cooperative jamming. According to the channel information at the destination, we address two types of jamming power allocation; (i) rate-optimal power allocation and (ii) outage-optimal power allocation. More specifically, without the instantaneous channel knowledge for the eavesdropper side, the outage probability of the secrecy rate is minimized with respect to the intended noise power level. We show that the outage-optimal allocation gives almost the same outage probability as the rateoptimal one. In addition, the jamming power consumption can be significantly reduced compared to the fixed and rate-optimal power allocation methods.

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)•Sep 1, 2012•5 citations

Cooperative Jamming and Power Allocation for Wireless Relay Networks in Presence of Eavesdropper

Lun Dong, Homayoun Yousefi’zadeh, Hamid Jafarkhani

Relying on physical layer security is an attractive alternative of utilizing cryptographic algorithms at upper layers of protocol stack for secure communications. In this paper, we consider a two-hop wireless relay network in the presence of an eavesdropper. Our scenario of interest spans over a four-node network model including a source, a destination, a trusted relay, and an untrusted eavesdropper in which the relay forwards the source message in a decode-and-forward (DF) fashion. The source and relay are allowed to use some of their available power to transmit jamming signals in order to create interference at the eavesdropper. The relay and destination are assumed to have the knowledge of the jamming signals. An important question is how to allocate the transmission power of the message signal and that of the jamming signal. First, we propose an optimal power allocation solution in which the knowledge of global channel state information (CSI) is required. To facilitate practical system design, two simple yet sub-optimal power allocation solutions are proposed which do not rely on eavesdropper's channels. For the purpose of performance comparisons, power allocation problems for two benchmark schemes without jamming are also analyzed.

International Conference on Communications•Jun 1, 2011•95 citations

Amplify‐and‐forward‐based cooperative jamming strategy with power allocation for secure communication

An Li, Yizhu Xu, Yuhao Wang +1 more

Summary This paper deals with the use of jamming transmission for secure amplify‐and‐forward‐based relay networks with total power constraints. An approach that the source and the relay use some of their available power to transmit jamming signals in order to create interference at the eavesdropper is investigated. Assume that the relay and destination have an a priori knowledge of the jamming signals. A power allocation policy that defines how the available power is distributed between the message signal and that of the jamming signal is presented. The results show that the proposed approach can increase the secrecy level and that a positive secrecy rate can be achieved even when the eavesdropper may be near the source. Copyright © 2014 John Wiley & Sons, Ltd.

International Journal of Communication Systems•Jan 10, 2014•12 citations

Outage optimal relay selection strategy using destination-based jamming for secure communication in amplify-and-forward relay networks

Sarbani Ghose, Ranjan Bose

In this paper, we consider a two-hop wireless system consisting of one source, one destination, one eavesdropper and multiple amplify-and-forward relays. A time-division duplex scheme is proposed that aims at minimizing the secrecy rate outage by selecting an optimal relay from the set of candidate relays. In the first time slot, the source transmits the information bearing signal, meanwhile the destination jams the eavesdropper. In the second slot, the selected relay forwards the received signals in amplify-and-forward fashion. Out of two hops, the eavesdropper can tap only the signal transmitted by the relay in the second hop. We obtain a closed-form expression of the end-to-end secrecy outage for instantaneous and statistical channel-state information of the eavesdropper. The analytical results suggest that the proposed destination-based jamming outperforms the conventional relay selection scheme without jamming. Monte Carlo simulations are performed to verify the analytical results.

IEEE Statistical Signal Processing Workshop (SSP)•Jun 1, 2014•2 citations

Adaptive Wireless-Powered Relaying Schemes With Cooperative Jamming for Two-Hop Secure Communication

Kisong Lee, Jun‐Pyo Hong, Hyun-Ho Choi +1 more

A two-hop relay network is considered, in which an eavesdropper can overhear the relaying signal. To prevent the eavesdropper from decoding this signal, a destination transmits a jamming noise while a source transmits the data signal to the relay. At the same time, the relay can harvest energy from both the source signal and the jamming noise, and use this harvested energy to forward the received signal to the destination. In such a wireless-powered relay system with cooperative jamming, we propose two adaptive relaying schemes based on power splitting and time switching techniques. In the proposed power splitting-based relaying (PSR) and time switching-based relaying (TSR) schemes, the relay controls the power splitting ratio (p) and time switching ratio (α), respectively, in order to achieve a balance between signal processing and energy harvesting. We find analytically the optimal values of p and α in each scheme to maximize the secrecy capacity under the assumption of high signal-to-noise ratio (SNR). Interestingly, although the eavesdropper's channel state information (CSI) is used in the derivation of the optimal control parameters (p and α), they are shown not to be affected by the eavesdropper's CSI in a high SNR regime. This implies that the proposed schemes can be effective even for practical environments where there is no eavesdropper's CSI. Furthermore, simulation results show that they well coincide with the exact solutions in practical environments even though the closed-form solutions are obtained with a high SNR assumption. Moreover, the comparisons of PSR and TSR in various scenarios show that the two relaying schemes have complementary performances depending on the network conditions. Specifically, PSR achieves greater secrecy capacity than TSR when the channel condition is unfavorable to the eavesdropper for wiretapping.

IEEE Internet of Things Journal•Apr 27, 2018•53 citations
In this paper, we propose an optimal source power allocation scheme for a two-hop amplify-and-forward relaying network with cooperative jamming where a source and destination transmit jamming signals. For the full CSI of all link and the CSI for desired link, the source power is optimally splitted to minimize the secrecy outage probability. Simulation results show that the proposed power allocation scheme improves the secrecy rate and reliability.
In this paper, we investigate secure communications in two-hop wireless relaying networks with one eavesdropper. To prevent the eavesdropper from intercepting the source message, the destination sends an intended jamming noise to the relay, which is referred to as cooperative jamming. This jamming noise helps protecting the source message from being captured reliably at the eavesdropper, while the destination cancels its self-intended noise. According to the channel information available at the destination, we derive three jamming power allocation strategies to minimize the outage probability of the secrecy rate. In addition, we derive analytic results quantifying the jamming power consumption of the proposed allocation methods.
In this paper, we investigate secrecy communications in two-hop wireless relaying networks which consist of one source, one amplify-and-forward (AF) relay, one legitimate destination, and one eavesdropper. To prevent the eavesdropper from intercepting the source message, we make the destination send the intended noise to the AF relay during the first phase. This is referred to as cooperative jamming. According to the channel information at the destination, we address two types of jamming power allocation; (i) rate-optimal power allocation and (ii) outage-optimal power allocation. More specifically, without the instantaneous channel knowledge for the eavesdropper side, the outage probability of the secrecy rate is minimized with respect to the intended noise power level. We show that the outage-optimal allocation gives almost the same outage probability as the rateoptimal one. In addition, the jamming power consumption can be significantly reduced compared to the fixed and rate-optimal power allocation methods.
Relying on physical layer security is an attractive alternative of utilizing cryptographic algorithms at upper layers of protocol stack for secure communications. In this paper, we consider a two-hop wireless relay network in the presence of an eavesdropper. Our scenario of interest spans over a four-node network model including a source, a destination, a trusted relay, and an untrusted eavesdropper in which the relay forwards the source message in a decode-and-forward (DF) fashion. The source and relay are allowed to use some of their available power to transmit jamming signals in order to create interference at the eavesdropper. The relay and destination are assumed to have the knowledge of the jamming signals. An important question is how to allocate the transmission power of the message signal and that of the jamming signal. First, we propose an optimal power allocation solution in which the knowledge of global channel state information (CSI) is required. To facilitate practical system design, two simple yet sub-optimal power allocation solutions are proposed which do not rely on eavesdropper's channels. For the purpose of performance comparisons, power allocation problems for two benchmark schemes without jamming are also analyzed.
Summary This paper deals with the use of jamming transmission for secure amplify‐and‐forward‐based relay networks with total power constraints. An approach that the source and the relay use some of their available power to transmit jamming signals in order to create interference at the eavesdropper is investigated. Assume that the relay and destination have an a priori knowledge of the jamming signals. A power allocation policy that defines how the available power is distributed between the message signal and that of the jamming signal is presented. The results show that the proposed approach can increase the secrecy level and that a positive secrecy rate can be achieved even when the eavesdropper may be near the source. Copyright © 2014 John Wiley & Sons, Ltd.
In this paper, we consider a two-hop wireless system consisting of one source, one destination, one eavesdropper and multiple amplify-and-forward relays. A time-division duplex scheme is proposed that aims at minimizing the secrecy rate outage by selecting an optimal relay from the set of candidate relays. In the first time slot, the source transmits the information bearing signal, meanwhile the destination jams the eavesdropper. In the second slot, the selected relay forwards the received signals in amplify-and-forward fashion. Out of two hops, the eavesdropper can tap only the signal transmitted by the relay in the second hop. We obtain a closed-form expression of the end-to-end secrecy outage for instantaneous and statistical channel-state information of the eavesdropper. The analytical results suggest that the proposed destination-based jamming outperforms the conventional relay selection scheme without jamming. Monte Carlo simulations are performed to verify the analytical results.
A two-hop relay network is considered, in which an eavesdropper can overhear the relaying signal. To prevent the eavesdropper from decoding this signal, a destination transmits a jamming noise while a source transmits the data signal to the relay. At the same time, the relay can harvest energy from both the source signal and the jamming noise, and use this harvested energy to forward the received signal to the destination. In such a wireless-powered relay system with cooperative jamming, we propose two adaptive relaying schemes based on power splitting and time switching techniques. In the proposed power splitting-based relaying (PSR) and time switching-based relaying (TSR) schemes, the relay controls the power splitting ratio (p) and time switching ratio (α), respectively, in order to achieve a balance between signal processing and energy harvesting. We find analytically the optimal values of p and α in each scheme to maximize the secrecy capacity under the assumption of high signal-to-noise ratio (SNR). Interestingly, although the eavesdropper's channel state information (CSI) is used in the derivation of the optimal control parameters (p and α), they are shown not to be affected by the eavesdropper's CSI in a high SNR regime. This implies that the proposed schemes can be effective even for practical environments where there is no eavesdropper's CSI. Furthermore, simulation results show that they well coincide with the exact solutions in practical environments even though the closed-form solutions are obtained with a high SNR assumption. Moreover, the comparisons of PSR and TSR in various scenarios show that the two relaying schemes have complementary performances depending on the network conditions. Specifically, PSR achieves greater secrecy capacity than TSR when the channel condition is unfavorable to the eavesdropper for wiretapping.