Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)

Thin Film Technology For High And Low Tc Squids

W. J. Gallagher

Published Aug 24, 2005• 0 citations
Publisher

Abstract

This talk reviews recent advances in thin film technology for I ow4 em perat ure and hig h-t em perat u re SQUlDs and their associated coupling structures. SUMMARY For years, nearly quantum limited operation of low-Tc SQUIDs has been available in laboratory demonstrations, but only recently have practical devices that harness this sensitivity for useful measurements been put into operation. Mostly until now this has been done by specially configuring experiments that can be well coupled to the small inductance of nearly quantum limited SQUIDs. As an example, we have coupled a -2h SQUID operating at 290 mK to a pickup coil in a microsusceptometer configuration so as to achieve an equivalent spin sensitivity of -3~103 spinsfJHz. Future progress in lithography and the concomitant processes of fine feature reproduction will allow us to shrink the size of coupling structures and thereby extend the range of SQUID applications that can take advantage of the improved sensitivity available in low inductance SQUIDs.

DOI
10.1109/iembs.1990.691612

Related papers

Applications of superconducting electronics to quantum optics and quantum metrology

Ling Yun Hao

SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.

Advances in Automobile Engineering•Jan 1, 2021•0 citations

Use of low-noise dc-SQUIDs in fundamental physics experiments

P. Carelli, Maria Gabriella Castellano, Roberto Leoni +1 more

The noise performance of dc-SQUIDs (Superconducting Quantum Interference Devices), which nowadays can reach values close to the quantum limit, makes them very attractive as amplifiers for experiments using low temperatures and demanding for extremely high sensitivity. After reviewing the working principle of the dc-SQUID, we describe a thin-film device with a new structure, which allowed us to reach an energy sensitivity of 5.5 h- at 0.9 K and a good coupling with a large input coil. At last we discuss some fundamental physics experiments which take advantage from the SQUID use.

Journal de Physique IV (Proceedings)•Jun 1, 1998•0 citations

Low-noise tunnel junction dc SQUID’s

Michael W. Cromar, P. Carelli

We present the results of an investigation of thin-film dc super conducting quantum interference device (SQUID’s) with very high energy resolution. The SQUID’s were fabricated using integrated-circuit techniques appropriate for superconducting devices. A weakly coupled SQUID with very low inductance (1 pH) had an intrinsic energy sensitivity 6×10−34 J/Hz = 0.9 h. A well-coupled SQUID (coupling constant α = 0.43) had an energy sensitivity referred to the input coil of 4.7×10−32 J/Hz = 71 h.

Applied Physics Letters•May 1, 1981•86 citations

Low-noise modular microsusceptometer using nearly quantum limited dc SQUIDs

D. D. Awschalom, James R. Rozen, M. B. Ketchen +4 more

A flexible combination of superconducting integrated circuits was used to construct a low-temperature magneto-optic microsusceptometer utilizing a dc superconducting quantum inteference device (SQUID) detector operating near the quantum limit (coupled energy sensitivity of 1.7ℏ). Miniature pick-up loop assemblies on transparent substrates were joined by superconducting interchip connections to a thin-film dc SQUID, which is in turn read out by a second dc SQUID connected to room-temperature electronics. Measurements on an 8.5-μm-diam titanium dot evaporated directly into the pick-up loop demonstrate a spin sensitivity of ∼103 spins/(Hz)1/2 at T=290 mK.

Applied Physics Letters•Nov 21, 1988•115 citations

Design considerations for DC SQUIDs fabricated in deep sub-micron technology

M. B. Ketchen

Practical SQUIDs with well-coupled input coils of usable inductance have generally been fabricated at the 2-5 mu m level of lithography. Other technologies, silicon in particular, are now routinely practised at the 0.5 mu m level of lithography with impressive demonstrations at the 0.1-0.25 mu m level not uncommon. The implications of applying such a fabrication capability to advance DC SQUID technology are explored. In particular, the issues of scaling practical DC SQUIDs down to the 0.1-0.25 mu m regime are examined, using as a prototype design the basic washer SQUID with a spiral input coil. A technical path is mapped out that leads to a practical SQUID less than 0.05 mm/sup 2/ in area with a tightly coupled 2- mu H input coil, user-friendly voltage-flux characteristics, minimal flux creep related hysteresis, and coupled energy sensitivity approaching the quantum limit at 4.2 K.

IEEE Transactions on Magnetics•Mar 1, 1991•64 citations

Sub-μm linewidth input coils for low T c integrated thin-film dc superconducting quantum interference devices

M. B. Ketchen, Kevin G. Stawiasz, Dale J. Pearson +6 more

We have, for the first time, demonstrated integrated dc superconducting quantum interference devices (SQUIDs) with input coils of linewidth down to 0.5 μm. The SQUID inductance L consists of a single octagonal washer or two or four such washers configured in parallel. The input coil of inductance Li, which couples to L with a mutual inductance of Mi, consists of fine-line octagonal spiral(s) fabricated in close proximity to the washer(s). For a two-washer SQUID with twin 80-turn, 0.5 μm spirals, Li=2.5 μH, Mi=12.7 nH, L=109 pH, and the coupling constant k2=0.85. This entire device occupies an area of less than 0.2 mm2.

Applied Physics Letters•Jul 20, 1992•22 citations
This talk reviews recent advances in thin film technology for I ow4 em perat ure and hig h-t em perat u re SQUlDs and their associated coupling structures. SUMMARY For years, nearly quantum limited operation of low-Tc SQUIDs has been available in laboratory demonstrations, but only recently have practical devices that harness this sensitivity for useful measurements been put into operation. Mostly until now this has been done by specially configuring experiments that can be well coupled to the small inductance of nearly quantum limited SQUIDs. As an example, we have coupled a -2h SQUID operating at 290 mK to a pickup coil in a microsusceptometer configuration so as to achieve an equivalent spin sensitivity of -3~103 spinsfJHz. Future progress in lithography and the concomitant processes of fine feature reproduction will allow us to shrink the size of coupling structures and thereby extend the range of SQUID applications that can take advantage of the improved sensitivity available in low inductance SQUIDs.
SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.  We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.
The noise performance of dc-SQUIDs (Superconducting Quantum Interference Devices), which nowadays can reach values close to the quantum limit, makes them very attractive as amplifiers for experiments using low temperatures and demanding for extremely high sensitivity. After reviewing the working principle of the dc-SQUID, we describe a thin-film device with a new structure, which allowed us to reach an energy sensitivity of 5.5 h- at 0.9 K and a good coupling with a large input coil. At last we discuss some fundamental physics experiments which take advantage from the SQUID use.
We present the results of an investigation of thin-film dc super conducting quantum interference device (SQUID’s) with very high energy resolution. The SQUID’s were fabricated using integrated-circuit techniques appropriate for superconducting devices. A weakly coupled SQUID with very low inductance (1 pH) had an intrinsic energy sensitivity 6×10−34 J/Hz = 0.9 h. A well-coupled SQUID (coupling constant α = 0.43) had an energy sensitivity referred to the input coil of 4.7×10−32 J/Hz = 71 h.
A flexible combination of superconducting integrated circuits was used to construct a low-temperature magneto-optic microsusceptometer utilizing a dc superconducting quantum inteference device (SQUID) detector operating near the quantum limit (coupled energy sensitivity of 1.7ℏ). Miniature pick-up loop assemblies on transparent substrates were joined by superconducting interchip connections to a thin-film dc SQUID, which is in turn read out by a second dc SQUID connected to room-temperature electronics. Measurements on an 8.5-μm-diam titanium dot evaporated directly into the pick-up loop demonstrate a spin sensitivity of ∼103 spins/(Hz)1/2 at T=290 mK.
Practical SQUIDs with well-coupled input coils of usable inductance have generally been fabricated at the 2-5 mu m level of lithography. Other technologies, silicon in particular, are now routinely practised at the 0.5 mu m level of lithography with impressive demonstrations at the 0.1-0.25 mu m level not uncommon. The implications of applying such a fabrication capability to advance DC SQUID technology are explored. In particular, the issues of scaling practical DC SQUIDs down to the 0.1-0.25 mu m regime are examined, using as a prototype design the basic washer SQUID with a spiral input coil. A technical path is mapped out that leads to a practical SQUID less than 0.05 mm/sup 2/ in area with a tightly coupled 2- mu H input coil, user-friendly voltage-flux characteristics, minimal flux creep related hysteresis, and coupled energy sensitivity approaching the quantum limit at 4.2 K.
We have, for the first time, demonstrated integrated dc superconducting quantum interference devices (SQUIDs) with input coils of linewidth down to 0.5 μm. The SQUID inductance L consists of a single octagonal washer or two or four such washers configured in parallel. The input coil of inductance Li, which couples to L with a mutual inductance of Mi, consists of fine-line octagonal spiral(s) fabricated in close proximity to the washer(s). For a two-washer SQUID with twin 80-turn, 0.5 μm spirals, Li=2.5 μH, Mi=12.7 nH, L=109 pH, and the coupling constant k2=0.85. This entire device occupies an area of less than 0.2 mm2.