Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Circuits and Devices Magazine

Beyond the silcon road map

Hiroshi Kumagai

Published Jan 1, 2004• 8 citations
Publisher

Abstract

We have first developed an all-solid-state 252 nm coherent light source for laser cooling of silicon atoms. This can give an impetus to research into the manipulation of the atomic motion of silicon atoms toward nanoprocess applications. Therefore, we developed an experimental setup for silicon atom manipulation. It was found that a high-quality silicon atomic beam, useful for nanoprocess applications, is obtainable with manipulation using the coherent light source in the system. With this unique apparatus, we continue the challenge to demonstrate the spatial design of nuclear spins of the family of isotopes with laser cooling of Si.

DOI
10.1109/mcd.2004.1263405

Related papers

Toward nano-process applications with laser-cooled silicon atoms

Hiroshi Kumagai, Yuichi Asakawa, Katsumi Midorikawa +1 more

We have developed an all-solid-state 252nm coherent light source for laser cooling of silicon atoms with tow-stage highly efficient frequency conversions with external cavities. With the coherent light source, it is possible to manipulate the atomic motion of the silicon atoms towards nano-process applications. In this paper, deflection, collimation, and axial velocity selection of the silicon atomic beam with the coherent light source are discussed.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 21, 2003•2 citations

Development of a Continuous-Wave, Deep-Ultraviolet, and Single-Frequency Coherent Light Source—Challenges Toward Laser Cooling of Silicon

Hiroshi Kumagai

Laser cooling techniques of silicon may be a powerful tool to create a new silicon road map. In the first step, to realize the laser cooling of neutral silicon atoms highly efficient frequency conversions are conducted to obtain a deep-ultraviolet single-mode coherent light using two-stage external cavities. The 154-mW power at around 252 nm is obtained with a conversion efficiency of more than 8% by doubly resonant sum-frequency mixing of 373-nm light from the first-stage conversion and 780-nm light from a single-mode Ti:sapphire laser. This paper reviews a series of challenges for taking possession of the spatial design of nuclear spins of the family of stable isotopes with laser cooling of silicon.

IEEE Journal of Selected Topics in Quantum Electronics•Nov 1, 2004•11 citations

Laser Cooling and Spectroscopy of Atomic Si for Silicon-Based Quantum Applications

Jerry Sell, Alina Gearba, Anita N. Dunsmore +8 more

Laser cooling of silicon could provide a new technique to manipulate individual Si isotopes. We perform laser spectroscopy on a Si atomic beam at 252 nm to measure the isotope shifts between 28 − 30Si. This article has been approved for public release: distribution unlimited (USAFA-DF-2023-61).

Quantum 2.0 Conference and Exhibition•Jan 1, 2023•0 citations

Robust deep-UV coherent light source for laser cooling of silicon atoms

Hiroshi Kumagai, Yuichi Asakawa, Katsumi Midorikawa +1 more

All-solid-state 252 nm coherent light source for laser cooling of silicon atoms was developed successfully by two-stage highly efficient frequency conversions with external cavities.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Nov 13, 2002•0 citations

Optogalvanic spectroscopy of silicon atoms towards laser cooling of silicon

Hiroshi Kumagai, Y. Ueda, T. Iwane +3 more

Summary form only given. Various atoms belonging to the elements of alkali metals, alkaline-earth metals, and rare gases have been cooled by laser since Haensch and Schawlow proposed laser cooling of atoms in 1975. The resonant frequencies for these atoms have been accessible with conventional lasers. By contrast, silicon atoms have not been the same case as these elements, while there are various potential applications such as atom lithography and atom holography. Therefore, we developed the light source for laser cooling of silicon atoms for the first time. The all-solid-state light source can radiate a continuous-wave and single-frequency coherent light at 252 nm whose linewidth is 11 MHz, which is narrow enough because the natural linewidth of the laser cooling transition is 29 MHz. Moreover, the deep ultraviolet output is stable, because the power fluctuation is less than 5%. Towards laser cooling of silicon atoms, we should know the accurate frequency of our light source. Therefore, we perform the optogalvanic spectroscopy of silicon atoms with a hollow-cathode lamp to set the frequency. In order to examine the performance of the silicon-hollow-cathode lamp, we demonstrated the spectroscopic experiment with the third harmonic coherent light of a ns Ti:sapphire laser, which provides 10 ns pulsed light with a 10 Hz repetition rate. Around 252 nm, we observed optogalvanic signals of neutral silicon atoms.

European Quantum Electronics Conference (EQEC)•Jan 1, 2003•0 citations

Laser cooling for Si atom manipulation with atomic mirror

Hiroshi Kumagai, S. Shimizu, T. Iwane +3 more

Highly efficient frequency conversions were conducted to obtain a deep-ultraviolet single-mode coherent light using two-stage external cavities. 154-mW power at around 252 nm was obtained with a conversion efficiency of more than 8% by doubly resonant sum-frequency mixing of 373-nm light from the first-stage conversion and 780-nm light from a single-mode Ti:sapphire laser. The output performances of the deep-ultraviolet light source are sufficient for realizing the laser cooling of neutral silicon atoms and then their manipulation with an atomic mirror.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 15, 2004•0 citations
We have first developed an all-solid-state 252 nm coherent light source for laser cooling of silicon atoms. This can give an impetus to research into the manipulation of the atomic motion of silicon atoms toward nanoprocess applications. Therefore, we developed an experimental setup for silicon atom manipulation. It was found that a high-quality silicon atomic beam, useful for nanoprocess applications, is obtainable with manipulation using the coherent light source in the system. With this unique apparatus, we continue the challenge to demonstrate the spatial design of nuclear spins of the family of isotopes with laser cooling of Si.
Laser cooling techniques of silicon may be a powerful tool to create a new silicon road map. In the first step, to realize the laser cooling of neutral silicon atoms highly efficient frequency conversions are conducted to obtain a deep-ultraviolet single-mode coherent light using two-stage external cavities. The 154-mW power at around 252 nm is obtained with a conversion efficiency of more than 8% by doubly resonant sum-frequency mixing of 373-nm light from the first-stage conversion and 780-nm light from a single-mode Ti:sapphire laser. This paper reviews a series of challenges for taking possession of the spatial design of nuclear spins of the family of stable isotopes with laser cooling of silicon.
Summary form only given. Various atoms belonging to the elements of alkali metals, alkaline-earth metals, and rare gases have been cooled by laser since Haensch and Schawlow proposed laser cooling of atoms in 1975. The resonant frequencies for these atoms have been accessible with conventional lasers. By contrast, silicon atoms have not been the same case as these elements, while there are various potential applications such as atom lithography and atom holography. Therefore, we developed the light source for laser cooling of silicon atoms for the first time. The all-solid-state light source can radiate a continuous-wave and single-frequency coherent light at 252 nm whose linewidth is 11 MHz, which is narrow enough because the natural linewidth of the laser cooling transition is 29 MHz. Moreover, the deep ultraviolet output is stable, because the power fluctuation is less than 5%. Towards laser cooling of silicon atoms, we should know the accurate frequency of our light source. Therefore, we perform the optogalvanic spectroscopy of silicon atoms with a hollow-cathode lamp to set the frequency. In order to examine the performance of the silicon-hollow-cathode lamp, we demonstrated the spectroscopic experiment with the third harmonic coherent light of a ns Ti:sapphire laser, which provides 10 ns pulsed light with a 10 Hz repetition rate. Around 252 nm, we observed optogalvanic signals of neutral silicon atoms.
Highly efficient frequency conversions were conducted to obtain a deep-ultraviolet single-mode coherent light using two-stage external cavities. 154-mW power at around 252 nm was obtained with a conversion efficiency of more than 8% by doubly resonant sum-frequency mixing of 373-nm light from the first-stage conversion and 780-nm light from a single-mode Ti:sapphire laser. The output performances of the deep-ultraviolet light source are sufficient for realizing the laser cooling of neutral silicon atoms and then their manipulation with an atomic mirror.