The ability to make ultra-precise measurements is fundamentally important to science as it allows theories to be tested and refined. Interferometers offer unrivalled measurement precision and therefore form the basis of many metrology schemes. Research has shown that by using quantum states as inputs to interferometers, precisions better than anything possible classically can be achieved. Nevertheless, these states are difficult to produce and fragile to particle losses. Consequently, classical inputs, which are extremely robust, are used in experiments. Here, however, we propose experimentally accessible schemes to make quantum-limited measurements, in particular rotation measurements using Bose-Einstein condensates, that are robust to losses. We begin by describing how, by loading a Bose-Einstein condensate into an optical ring lattice, multiport beam splitters are created through a simple raising and lowering of potential barriers between sites. We then use these ‘splitters’ to create an atomic gyroscope. We demonstrate how to create several quantum states in the gyroscope, all capable of making rotation measurements. Whilst NOON states afford best precision in idealised set-ups, we find they are outperformed by ‘bat’ states for modest loss rates. However, bat states are not ideal as they are outperformed by classical states for large losses. A second gyroscope scheme is therefore developed. Using multiple momentum modes, rather than just two, we show quantum-limited precisions can be reached using states that have similar robustness to classical states. The final section focuses on the precision of linear interferometers. Recent work[1, 2] has calculated the theoretical optimum initial states for two-mode lossy interferometers. Here we present an experimental way to produce initial states that afford similar precisions to this optimum. We also consider lossy multimode interferometry and demonstrate a potential advantage over two-mode systems. It is thought with further investigation other advantages will be found.
The ability to make ultra-precise measurements is fundamentally important to science as it allows theories to be tested and refined. Interferometers offer unrivalled measurement precision and therefore form the basis of many metrology schemes. Research has shown that by using quantum states as inputs to interferometers, precisions better than anything possible classically can be achieved. Nevertheless, these states are difficult to produce and fragile to particle losses. Consequently, classical inputs, which are extremely robust, are used in experiments. Here, however, we propose experimentally accessible schemes to make quantum-limited measurements, in particular rotation measurements using Bose-Einstein condensates, that are robust to losses. We begin by describing how, by loading a Bose-Einstein condensate into an optical ring lattice, multiport beam splitters are created through a simple raising and lowering of potential barriers between sites. We then use these ‘splitters’ to create an atomic gyroscope. We demonstrate how to create several quantum states in the gyroscope, all capable of making rotation measurements. Whilst NOON states afford best precision in idealised set-ups, we find they are outperformed by ‘bat’ states for modest loss rates. However, bat states are not ideal as they are outperformed by classical states for large losses. A second gyroscope scheme is therefore developed. Using multiple momentum modes, rather than just two, we show quantum-limited precisions can be reached using states that have similar robustness to classical states. The final section focuses on the precision of linear interferometers. Recent work[1, 2] has calculated the theoretical optimum initial states for two-mode lossy interferometers. Here we present an experimental way to produce initial states that afford similar precisions to this optimum. We also consider lossy multimode interferometry and demonstrate a potential advantage over two-mode systems. It is thought with further investigation other advantages will be found.
Bose-Einstein condensates are coherent matter waves, produced by cooling gaseous atomic clouds to ultra-low temperatures. For applications in atom interferometry and precision measurements, Bose-condensed sources present an intriguing alternative to thermal atoms. Although the current sensitivity achievable with interferometers using coherent atoms is not comparable to thermal beam machines (mainly due to the lower flux), there are promising ways to utilise the potential of Bose-condensed sources for atom interferometry. Among those is the low momentum width of Bose-Einstein condensates, which can generally be well controlled and is advantageous for increased interferometric sensitivities by implementing large momentum transfer beam splitters. As part of this thesis, experimental and theoretical investigations are presented to investigate the potential of Bose-Einstein condensates for such applications. We shall present the quantum projection noise limited performance of a Ramsey interferometer operating on the atomic clock transition of a freely expanding cloud of Bose-condensed rubidium 87 atoms. The results include Ramsey fringes of high visibility, not measurably affected by atomic interaction-induced dephasing effects. The achievement and detection of the quantum projection noise limit rely critically on the precision and accuracy of both the imaging setup and the coupling scheme in the interferometric beam splitters. The stabilisation of the beam splitters via an optical Sagnac interferometer is the basis for the quantum projection noise limited performance of the interferometer presented. For an increase of bandwidth and flux in atom interferometric measurements, it is advantageous to use a continuous atomic beam. A truly continuous coherent atom source has not been realised to date, and we present results on a pumping mechanism in this thesis, as a decisive step towards a continuous atom laser. By the investigation of different momentum resonances, we find that the pumping scheme relies on a Raman superradiance-like process. Finally, the thesis demonstrates two interaction measurements in rubidium. The strong mean field interactions due to the high densities in Bose-Einstein condensates are used to probe the potential of a rubidium 87 condensate with an atom laser. The measurement allows a determination of the scattering length between the two atomic states involved. In addition to this two-body scattering scheme, we present a measurement of three-body loss coefficients, extracted from loss curves in rubidium 85 Bose-Einstein condensates. The measurement provides new upper bounds on the three-body loss coefficients at the scattering lengths considered.
Ultra-cold atoms are highly sensitive to both inertial effects and electromagnetic fields, making atom interferometers excellent candidates for a variety of precision sensing applications. Furthermore, highly tunable atomic interactions combined with well established experimental techniques for trapping, cooling and manipulating ensembles of ultra-cold atoms, make them well suited to quantum enhancement. For these reasons, ensembles of ultra-cold atoms are excellent candidates for quantum-enhanced measurement devices. Broadly, this thesis presents a number of theoretical results which share the aim of progressing the proof-of-principle regime of current experiments to genuinely useful, ultra-precise quantum enhanced sensors.In Chapter 4 we explore the challenge of devising a useful, quantum-enhanced inertial measurement - to date no such experiment has been performed. Specifically, we present a model of a spin-squeezed rotation sensor utilising the Sagnac effect in a spin-1 Bose-Einstein condensate in a ring trap. The two input states for the interferometer are seeded using Raman pulses with Laguerre-Gauss beams and are amplified by the bosonic enhancement of spin-exchange collisions, resulting in spin-squeezing and potential quantum enhancement in the interferometry. The ring geometry has an advantage over separated beam path atomic rotation sensors due to the uniform condensate density. We model the interferometer both analytically and numerically for realistic experimental parameters and find that significant quantum enhancement is possible. However, this enhancement is partially degraded when working in a regime with strong atomic interactions, indicating that perhaps interaction-based squeezing is not the best route to a quantum-enhanced inertial measurement.Continuing the theme of practical spin-squeezing with atomic interactions, in Chapter 5 we explore methods to combat detection noise, which is currently one of the most significant experimental limitations for quantum-enhanced atom interferometers. A useful quantum-enhanced interferometer requires nonclassical states with a high particle number and the (close to) optimal exploitation of the states' quantum correlations. Unfortunately, the single-particle detection resolution demanded by conventional protocols, such as spin squeezing via one-axis twisting, places severe limits on the particle number. Additionally, the challenge of finding optimal measurements (that saturate the quantum Cram´er-Rao bound) for an arbitrary nonclassical state limits most metrological protocols to only moderate levels of quantum enhancement. “Interaction-based readout” protocols have been shown to allow optimal interferometry or to provide robustness against detection noise at the expense of optimality. We prove that one has great flexibility in constructing an optimal protocol, thereby allowing it to also be robust to detection noise. This requires the full probability distribution of outcomes in an optimal measurement basis, which is typically easily-accessible and can be determined from specific criteria we provide. Additionally, we quantify the robustness of several classes of interaction-based readouts under realistic experimental constraints. We determine that optimal and robust quantum metrology is achievable in current spin-squeezing experiments.Macroscopic superposition states (known as spin-cat states in atomic ensembles) achieve the ultimate quantum precision limit. In Chapters 6 and 7 we turn our attention to studying decoherence that arises in creating and manipulating these states. In its simplest form, decoherence occurs when a quantum state is entangled with a second state, but the results of measurements made on the second state are not accessible. As the second state has effectively ``measured the first, in Chapter 6 we argue that the quantum Fisher information is the relevant metric for predicting and quantifying this kind of decoherence. In particular we apply this analysis to studying decoherence imparted on spin-cat states via atom-light interactions, which are an essential process in atom interferometry. We find that, compared to classical atomic states, spin-cat states are highly susceptible to this kind of decoherence. We investigate the required optical field occupation, such that this decoherence is negligible.Finally, in Chapter 7 we explore the deleterious effects of spatial and phase dynamics during the creation of spin-cat states via one-axis twisting in a two-component Bose-Einstein condensate. We simulate the breathing dynamics in 1 spatial dimension, employing the method of Sinatra and Castin, whereby the state is expanded into the Fock basis, with each basis state evolving within the Hartree-Fock approximation. This method is able to capture both multi-mode effects and quantum correlations, which allows us to calculate the quantum Fisher information. We find that so long as the time taken for the condensate to reach a spin-cat state is an integer multiple of the breathing period, it is sometimes possible to realise something extremely close to a spin-cat state, despite significant dynamics. These results indicate that large non-linearities, and the associated speed-up in entangling dynamics, are not fundamentally incompatible with the production of fragile, highly entangled states such as spin-cat states.
In optical interferometry path-entangled states such as NOON states have shown to give quantum-enhanced precision measurements, but these states are notoriously fragile to particle losses, which typically collapse the quantum state and destroy the phase information. A class of inherently robust states that show the potential for great improvements over the alternatives are the entangled coherent states (ECSs). We show that these states allow substantial improvements over unentangled `classical' states and highly-entangled NOON states for a wide range of loss values. We then describe a measurement scheme that can be used to measure these states with a precision close to the theoretical bound given by the quantum Fisher information. \nWe then look at the quantum mechanisms that lead to precise measurements. In optical interferometry multi-mode entanglement is often assumed to be the driving force behind quantum enhanced measurements. Recent work has shown this assumption to be false, and here we show that when photon losses occur multi-mode entanglement is actually detrimental to obtaining quantum enhanced measurements. We specifically apply this idea to a superposition of coherent states, demonstrating that these states show a robustness to loss that allows them to significantly outperform their competitors in realistic systems. A practically viable measurement scheme is then presented that allows measurements close to the theoretical bound, even with loss. \nIn this thesis we also consider superpositions of spin coherent states and their application to quantum metrology. Compared to optical states, spin systems have a distinctly different process of decoherence known as non-Markovian dephasing, which has shown to give greatly improved robustness to loss. We see that spin cat states give an enhanced scaling over the shot noise limit, even with dephasing, whilst being realisable with current technology.
By exploiting the correlation properties of ultracold atoms in a multimode interferometer, we show how quantum enhanced measurement precision can be achieved with strong robustness to particle loss. While the potential for enhanced measurement precision is limited for even moderate loss in two-mode schemes, multimode schemes can be more robust. A ring interferometer for sensing rotational motion with noninteracting fermionic atoms can realize an uncertainty scaling of 1/(N√η) for N particles with a fraction η remaining after loss, which undercuts the shot-noise limit of two-mode interferometers. A second scheme with strongly interacting bosons achieves a comparable measurement precision and improved readout.
A promising practical application of entanglement is metrology, where quantum states can be used to make measurements beyond the shot noise limit. Here we consider how metrology schemes could be realised using atomic Bose-Einstein condensates (BECs) trapped in different potentials. In particular, we show that if a trapped BEC is rotated at just the right frequency, it can undergo a quantum phase transition characterised by large-scale entanglement spreading across the system. This simple process of stirring can generate interesting quantum states such as macroscopic superpositions of all the atoms flowing in opposite directions around a ring-shaped potential. We consider different trapping potentials and show how this leads to different entangled states. In particular, we find that by reducing the dimensionality of the system to one or two dimensions, it is possible to generate entangled states that are remarkably robust to the loss of atoms and so are ideally suited to precision measurement schemes.
Matter-wave interferometers show great a potential for improving inertial sensing. The absence of drifts recommends them for a variety of applications in geodesy, navigation, or fundamental physics. Here, ultracold atomic ensembles, featuring a velocity distribution well below the photon recoil velocity, open up new perspectives. In contrast to standard laser cooling methods, they allow to reach better beam-splitting efficiencies and, hence, a higher contrast as well as to reduce systematic uncertainties and biases. Presently, Bose-Einstein condensates (BECs) provide the means to achieve the lowest expansion energies of few picokelvin. Indeed, the momentum distribution of a BEC can be further narrowed after reaching the regime of ballistic expansion, where all mean field energy is converted to kinetic energy, by the application of the delta-kick collimation technique. With such ensembles, Bragg processes can be driven with an efficiency of above 95% as well as Bloch oscillations performed without large atomic losses or dephasing. Both enable efficient large momentum transfer in interferometers to enhance their sensitivity for inertial effects. In a so-called twin-lattice atom interferometers more than thousand photon recoils are used to form compact but sensitive atom interferometers. These methods not only bring in reach extremely accurate gravimeters and accelerometers but also gyroscopes. Like the Sagnac effect in ring laser or fiber gyroscopes, the sensitivity of atom interferometers to rotations increases with the space-time area enclosed by the interferometer. In the case of light interferometers, the latter can be enlarged by forming multiple fiber loops. However, the equivalent for matter-wave interferometers remains an experimental challenge. An atom interferometer with scalable area may be formed in a twin lattice combined with a relaunch mechanism to obtain multi loops as well. Due to this scalability, it offers the perspective of reaching unprecedented sensitivities for rotations in comparably compact sensor head setups. Moreover, atom-chip technologies offer the possibility to generate a BEC and perform delta-kick collimation in a fast and reliable away, paving the way for field-deployable miniaturized atomic devices. Last but not least, the extremely low expansion energies of BECs open up to extend the time atoms spend in the interferometer to tens of seconds. This brings in reach unprecedented sensitivities in space-borne applications such as satellite geodesy.