Flicker noise in rf SQUIDs based on high-temperature superconductors

R. Kleiner, D. Koelle, John L. Clarke

Fei Xie, J.C. Wang, Dongfeng He +7 more

Y. M. Galperin

Low-frequency noise in a hysteric rf superconducting quantum interference device (SQUID) originating from fluctuations of critical current of a weak link is considered. Such noise can be due to trapping-detrapping processes within the tunnel barrier or to the presence of structural defects with internal degrees of freedom in the surrounding of the weak link. The defects can switch between two (or more) metastable states due to interaction with the thermal bath. On the other hand, elastic (and electric) fields created by defects act upon the critical current of the weak link inducing its fluctuations in time. Such noise is most important for high-Tc SQUIDs at high enough temperatures when defects are effectively interacting with the thermal bath. The dependencies of the intensity and statistics of flicker noise on the SQUID’s parameters and operating regime are analyzed. It is shown that higher correlation functions of output voltage at a given driving current can provide some information on the mechanism of 1/f noise in rf SQUIDs.

R. H. Koch, John L. Clarke, Wolfgang M. Goubau +3 more

Yoshimi Hatsukade, Makoto TAKEMOTO, Ryuichi Kurosawa +2 more

Integrated high-temperature superconductor (HTS) radio-frequency (rf) superconducting quantum interference devices (SQUIDs) based on a bicrystal SrTiO3 substrate was investigated for application to magnetic contaminant detection. By covering a wide superconducting weak link and/or a slit of the YBa2Cu3O7-x SQUID with HTS thin films in flip-chip geometry, characteristics such as effective area and 1/f noise profile of the SQUID were successfully improved. By installing the covered SQUID in a magnetic contaminant detection system, it was demonstrated that the system can detect a tungsten ball of 15μm in diameter with a signal to noise ratio of about 2.

J. H. Claassen, Sebastian Wolf, D. U. Gubser +1 more