This thesis presents the development of a new apparatus, and imaging tech- niques, used to produce shaped cold electron bunches from ultracold plasma (UCP). Due to their low temperature, cold electron bunches from UCP have the potential to provide a compact electron source with sufficient brightness and coherence to enable single-shot ultrafast diffractive imaging of nano-scale samples, such as bio-molecules.
To create the electron bunch, a cold (70 μK) cloud of 108 rubidium-85 atoms was prepared in a magneto optical trap (MOT). Some of the atoms were excited to an intermediate state using a laser with a spatially varying in- tensity profile, then ionised by a second laser pulse. The shaped excitation laser allowed two-dimensional control of the electron density. The ionisation laser could, in principle, also be spatially varying, to allow three dimensional manipulation of the electron bunch shape. Due to Coulomb repulsion betweeen electrons within a bunch, the brightness of the source is critically dependent on its initial shape, and therefore the shape of the atom cloud. Uniform density bunches are particularly desirable due to their linear space-charge expansion. To optimise the source through production of uniform bunches, knowledge of the spatial density distribution of atoms in the cloud is required. Conventional imaging techniques for cold atoms are either technically demanding or destructive to the atom cloud, and are unsuitable for this application, providing direct motivation for the development of new methods. I have developed two new imaging techniques for use in shaped electron bunch production. The new techniques are particularly suited to our application, but are applicable to the cold atom research community in general, offer- ing several advantages over conventional methods. The first method adapts a phase-contrast imaging technique to measure the spatial distribution of atoms in a specific excited state. The second approach allows single-shot imaging of inhomogeneous atom clouds; that is, where both the density and refractive index may be spatially varying. The method uses a perturbative approach in conjunction with phase retrieval based on the transport of in- tensity equation. This technique is also potentially valuable for studies of atomic coherence effects in cold atoms and was demonstrated using spatially modulated electromagnetically induced transparency.
In collaboration with other members of our research group and in parallel with the imaging research, I also designed and constructed a new appara- tus to produce UCP. The experiment first produced electron bunches in late 2009, and using the imaging techniques I developed, the results of the first shaped electron bunches from UCP are presented here. Due to the low tem- perature of the electrons, such shaped bunches can only be produced and observed using a cold electron source. Conventional thermal sources, includ- ing photoemission and field emission sources, produce hot electrons whose high temperature immediately diffuses any initial structure. The effects of increased electron temperature on the quality of the bunch shape are inves- tigated here, resulting in the conclusion that cold electrons are essential for observing, and thus optimising, shaped bunches. Arbitrarily shaped bunches are demonstrated for the first time, using an intensity shaped excitation laser beam followed by uniform ionisation of the excited atom distribution. The laser intensity profile is adjusted using a spatial light modulator (SLM). Variations in atomic density which would degrade the bunch shape are measured using the imaging techniques developed. Adjustment of the excitation laser intensity to compensate for atomic density is shown to produce uniform bunches in two dimensions. Quantitative analysis of the acuity of the bunch edge provides an upper limit to the electron temperature of T = 35 K. Unlike photoemission sources, the electron bunch shaping mechanism demonstrated here can easily be generalised to three dimensions. In addition, field ionisa- tion of Rydberg atoms is observed to play an important role in the ionisation process, and suggested as a future avenue of research.
This thesis presents the development of a new apparatus, and imaging tech- niques, used to produce shaped cold electron bunches from ultracold plasma (UCP). Due to their low temperature, cold electron bunches from UCP have the potential to provide a compact electron source with sufficient brightness and coherence to enable single-shot ultrafast diffractive imaging of nano-scale samples, such as bio-molecules.
To create the electron bunch, a cold (70 μK) cloud of 108 rubidium-85 atoms was prepared in a magneto optical trap (MOT). Some of the atoms were excited to an intermediate state using a laser with a spatially varying in- tensity profile, then ionised by a second laser pulse. The shaped excitation laser allowed two-dimensional control of the electron density. The ionisation laser could, in principle, also be spatially varying, to allow three dimensional manipulation of the electron bunch shape. Due to Coulomb repulsion betweeen electrons within a bunch, the brightness of the source is critically dependent on its initial shape, and therefore the shape of the atom cloud. Uniform density bunches are particularly desirable due to their linear space-charge expansion. To optimise the source through production of uniform bunches, knowledge of the spatial density distribution of atoms in the cloud is required. Conventional imaging techniques for cold atoms are either technically demanding or destructive to the atom cloud, and are unsuitable for this application, providing direct motivation for the development of new methods. I have developed two new imaging techniques for use in shaped electron bunch production. The new techniques are particularly suited to our application, but are applicable to the cold atom research community in general, offer- ing several advantages over conventional methods. The first method adapts a phase-contrast imaging technique to measure the spatial distribution of atoms in a specific excited state. The second approach allows single-shot imaging of inhomogeneous atom clouds; that is, where both the density and refractive index may be spatially varying. The method uses a perturbative approach in conjunction with phase retrieval based on the transport of in- tensity equation. This technique is also potentially valuable for studies of atomic coherence effects in cold atoms and was demonstrated using spatially modulated electromagnetically induced transparency.
In collaboration with other members of our research group and in parallel with the imaging research, I also designed and constructed a new appara- tus to produce UCP. The experiment first produced electron bunches in late 2009, and using the imaging techniques I developed, the results of the first shaped electron bunches from UCP are presented here. Due to the low tem- perature of the electrons, such shaped bunches can only be produced and observed using a cold electron source. Conventional thermal sources, includ- ing photoemission and field emission sources, produce hot electrons whose high temperature immediately diffuses any initial structure. The effects of increased electron temperature on the quality of the bunch shape are inves- tigated here, resulting in the conclusion that cold electrons are essential for observing, and thus optimising, shaped bunches. Arbitrarily shaped bunches are demonstrated for the first time, using an intensity shaped excitation laser beam followed by uniform ionisation of the excited atom distribution. The laser intensity profile is adjusted using a spatial light modulator (SLM). Variations in atomic density which would degrade the bunch shape are measured using the imaging techniques developed. Adjustment of the excitation laser intensity to compensate for atomic density is shown to produce uniform bunches in two dimensions. Quantitative analysis of the acuity of the bunch edge provides an upper limit to the electron temperature of T = 35 K. Unlike photoemission sources, the electron bunch shaping mechanism demonstrated here can easily be generalised to three dimensions. In addition, field ionisa- tion of Rydberg atoms is observed to play an important role in the ionisation process, and suggested as a future avenue of research.
Observing matter on atomic length and time scales simultaneously is now routinely achieved in ultrafast electron and X-ray imaging techniques, but continued advances in both approaches promise to deliver huge leaps in our understanding of all kinds of atomic structures and processes. Both technologies rely on the generation of ultrabright, ultrashort duration electron bunches, with these bunches being used directly to probe the sample in electron diffraction, or to generate ultrabright X-ray pulses in X-ray free electron lasers. The Cold Atom Electron and Ion Source (CAEIS) was conceived as a possible way to generate ultrafast electron bunches that are brighter than can currently be produced, with the aim of enabling next-generation structural determination techniques, particularly those based on electron diffraction. The CAEIS generates electrons by near-threshold photoionisation of an atomic gas, which has been shown to produce electron bunches with temperature as low as 10K. Such cold electron bunches have the potential to be much brighter than those generated from solid photocathode sources, which typically have temperatures in the thousands of Kelvin range. Extremely cold ions are also generated in the CAEIS, which show great potential for use in ion microscopy and milling. This thesis presents work on a number of different aspects of the continued development of the cold atom electron and ion source, with a particular emphasis on progress towards ultrafast single-shot electron diffraction based experiments. The brightness degrading effects of space-charge repulsion are investigated using nanosecond duration ion bunches as analogues of ultrafast, picosecond duration electron bunches. Ion bunch shaping was achieved through tailoring of the spatial profile of lasers used in ionisation of the atomic gas. It was found that atomic fluorescence could substantially reduce the fidelity with which the ion bunch profile could be controlled, but methods were developed to circumvent the fluorescence problem. The improved shaping procedures allowed generation of uniformly filled ellipsoidal bunches, which theoretically will not suffer emittance degradation under space-charge expansion. Emittance measurements following space-charge driven expansion showed that these uniformly filled ellipsoids did indeed have reduced emittance growth compared to other profiles. Photoexcitation and field-ionisation processes involved in generation of cold electrons on ultrafast timescales were investigated, with the aim of determining the mechanisms that affect the ultimate electron bunch duration. Bunch duration was measured for a range of excitation conditions, with the finding that previously assumed ultrafast excitation pathways in fact generated fairly slow nanosecond long bunches. Ionisation time could also be a million times slower than assumed if atoms were excited below the classical ionisation threshold. Identification of the conditions required for ultrafast excitation and ionisation ultimately allowed generation of ultrafast cold electron bunches with duration of tens of picoseconds. Electron diffraction using nanosecond long electron bunches was achieved in both transmission and reflection modes for a variety of large samples of inorganic crystals. Bunches were of sufficiently high charge to allow identification of features of a crystal structure using only a single shot. Bragg peaks could also be identified by averaging together many images formed using ultrafast, but low-charge bunches. Simulations were performed to determine the feasibility of using electrons generated in the CAEIS for electron coherent diffractive imaging of nanoscale apertures. It was found that it should be possible to successfully reconstruct the object plane wavefield, even taking into account realistic experimental parameters for partial coherence and noise.
This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies.
The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source.
The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than ��175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources.
The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches.
Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.
Ultracold plasmas (UCPs) represent a marriage between the seemingly distinct fields of cold atom physics and plasma physics. In cold atom physics, dilute clouds of atoms can be trapped with laser radiation and cooled to J.1Ktemperatures. In contrast, in plasma physics the constituents generally have temperatures in the 1,000K-1O,000K range as well as much higher density. In 1999,Rolston and co-workers [1] first converted a cloud of laser-cooled atoms into a plasma by photo-ionizing the atoms just above threshold. This provides very unusual circumstances:the temperature of ions and neutrals is O.OOIK,that of electrons 10K! Such ultra-cold plasmas therefore are interesting subjects for fundamentalplasma physics studies.\nIn a recent paper [2], we argued that ultracold plasmas (UCPs) may in addition provide an entirely new way of generatinghigh-brightnesscharged-particlebeams, such as used in focused-ion beams, laser synchrotrons, and ultra-fast electron microscopy.\nHere, a low temperature T is beneficial for the intrinsic (transverse) brightness B of a\nsource since B = II(A1), where I is the current and A the cross-sectional area. I will discuss an experimental investigation of the properties of ion and electron beams extracted from ultracold plasmas, which shows that such beams indeed have low temperatures, and, as a result, high angular intensity.
Charged particle sources based on photoionisation of laser cooled atoms can provide unique properties, in particular high spatial coherence and the ability to create complex three-dimensional spatial density distributions, allowing detailed measurement of the internal charged particle interactions. Cold electrons extracted from laser cooled atoms promise the spatial coherence and high current required for picosecond molecular scale imaging. Similarly, sources of cold ions provide the opportunity of ion microscopy and ion beam milling with unprecedented resolution. We use arbitrary and real-time control of the electron and ion bunch shapes to demonstrate and measure the high spatial coherence of the cold atom electron and ion source.
We propose a technique for producing electron bunches that has the potential for advancing the state-of-the-art in brightness of pulsed electron sources by orders of magnitude. In addition, this method leads to femtosecond bunch lengths without the use of ultrafast lasers or magnetic compression. The electron source we propose is an ultracold plasma with electron temperatures down to 10 K, which can be fashioned from a cloud of laser-cooled atoms by photoionization just above threshold. Here we present results of simulations in a realistic setting, showing that an ultracold plasma has an enormous potential as a bright electron source.
In a Magneto-Optical Trap (MOT), realized for the first time in 1987, one can trap and cool neutral atoms to temperatures below a mK. The invention of this device caused a revolution in atomic physics. With an MOT collision and spectroscopy experiments could be performed with unprecedented accuracy. The main breakthrough came about 10 years later when the atom from an MOT were used to create a Bose Einstein Condensate (BEC), a source of coherent matter. All this work has been rewarded with no less than two Nobel prizes: in 1997, Chu, Cohen-Tannoudji and Phillips received the Nobel prize for the practical and theoretical development of laser cooling, and in 2001 Cornell, Ketterle and Wieman received the Nobel prize for the realization of a Bose Einstein Condensate in a dilute gas. In 1999 Killian et al. took trapped atoms in an entirely new direction when they succeeded in creating the very first Ultracold Plasma (UCP) from the atoms in an MOT. The temperature of such a plasma is more than 1000 times lower than the temperatures in conventional cold plasmas. As a result, this type of plasmas received a lot of attention, both theoretically and experimentally. So far studies of UCPs have mainly been of a fundamental kind. In this thesis we study both the fundamental aspects of atoms excited from a magneto-optical as well as the feasibility of using the electrons and ions from a UCP as a source for charged particle accelerators. The work in this thesis therefore pioneers the line between atom physics, plasma physics and accelerator physics. The first part of this thesis deals with an experimental study of the effect of an ionizing laser on cold neon atoms. Here we study the loss of atoms from a Magneto-Optical Trap caused by photionization. From these measurements we deduce a new value for the near threshold photoionization cross section 2:05±0:25x10-18 cm2 at ¿ = 351 nm and 2:05±0:25x10-18 cm2 at ¿ = 364 nm, which is a factor of four more accurate than previous measurements. The measured valuesagree with earlier measurements but differ signi¯cantly from theoretical values. The value of this cross section has a practical relevance for the realization of a continuous ion source. The second part of this thesis has been conducted at the University of Virginia. We study the role of dipole-dipole interactions in the formation of a UCP from a gas of cold Rydberg atoms, and the effect of dipole-dipole interactions on the broadening of microwave transitions. We find that the broadening scales linearly with the density en scales with the fourth power of n, the principal quantum number. These results show the great importance of dipole-dipole interactions in gas of cold Rydberg atoms and are also relevant for the possible realization of a quantum computer from Rydberg atoms. In a third part we studied the potential of using a UCP as a source for electron accelerators. This was done based upon elaborate simulations performed with the General Particle Tracer Code. The main result of these simulations is that, based upon realistic parameters, the brightness, i.e., the figure of merit for charged particle sources defined as the current divided by the emittance squared, of such a source can be up to two orders of magnitude larger than the brightness of conventional sources, which is a major advance. The emittance is a measure for the the focusability of the bunch, and scales as p T, with T the electron temperature. The increase in brightness is mainly attributed to the low electron temperatures of approximately 10 K in an UCP, resulting in an initial emittance of 0.01 mm mrad, compared to 1 mm mrad in a conventional source. With experimentally proven techniques it is possible to extract 10 nC/s from the source, which is a competitive repetition rate. In the next part we describe the design, construction and testing of the first setup with which we want to build an electron accelerator based upon cold atoms. For this we first built a vapor-cell magneto-optical trap, in which we can trap over 109 rubidium atoms with a temperature of 200 ¹K, straight from a background vapor, we also designed an atomic beam that will be implemented in the near future and can provide an increased repetition rate. In the last chapter we show how Rydberg atoms excited from an MOT, evolve into an UCP spontaneously. We extracted a minimum of 1 pC from the plasma. As a main result, we were one of the ¯rst to show how the ions and electrons from a UCP can be imaged on a phosphor screen. From these images we can deduct an upper value for the electron and the ion temperature, we extract for both the electrons and the ions an upper temperature of 40 K, when we translate this temperature to an initial emittance, we obtain a value of 0.01 mm mrad, proving the potential of the electrons extracted from atoms excited out of an MOT as a low emittance source. Our measured current of 1 ¹A is not yet competitive and results from the small electric field, but is expected to increase dramatically in the near future. We will implement a 30 kV 10 ns risetime accelerator with which it should be possible to get a current of about 50 mA. Furthermore we will implement the proper diagnostics to measure the proper charge, current and emittance. In the very last chapter we speculate charged particle sources from cold atoms might advance the state of the art in achievable brightness for both electron and ion beams.