Observing matter on atomic length and time scales simultaneously is now routinely achieved in ultrafast electron and X-ray imaging techniques, but continued advances in both approaches promise to deliver huge leaps in our understanding of all kinds of atomic structures and processes. Both technologies rely on the generation of ultrabright, ultrashort duration electron bunches, with these bunches being used directly to probe the sample in electron diffraction, or to generate ultrabright X-ray pulses in X-ray free electron lasers. The Cold Atom Electron and Ion Source (CAEIS) was conceived as a possible way to generate ultrafast electron bunches that are brighter than can currently be produced, with the aim of enabling next-generation structural determination techniques, particularly those based on electron diffraction. The CAEIS generates electrons by near-threshold photoionisation of an atomic gas, which has been shown to produce electron bunches with temperature as low as 10K. Such cold electron bunches have the potential to be much brighter than those generated from solid photocathode sources, which typically have temperatures in the thousands of Kelvin range. Extremely cold ions are also generated in the CAEIS, which show great potential for use in ion microscopy and milling. This thesis presents work on a number of different aspects of the continued development of the cold atom electron and ion source, with a particular emphasis on progress towards ultrafast single-shot electron diffraction based experiments. The brightness degrading effects of space-charge repulsion are investigated using nanosecond duration ion bunches as analogues of ultrafast, picosecond duration electron bunches. Ion bunch shaping was achieved through tailoring of the spatial profile of lasers used in ionisation of the atomic gas. It was found that atomic fluorescence could substantially reduce the fidelity with which the ion bunch profile could be controlled, but methods were developed to circumvent the fluorescence problem. The improved shaping procedures allowed generation of uniformly filled ellipsoidal bunches, which theoretically will not suffer emittance degradation under space-charge expansion. Emittance measurements following space-charge driven expansion showed that these uniformly filled ellipsoids did indeed have reduced emittance growth compared to other profiles. Photoexcitation and field-ionisation processes involved in generation of cold electrons on ultrafast timescales were investigated, with the aim of determining the mechanisms that affect the ultimate electron bunch duration. Bunch duration was measured for a range of excitation conditions, with the finding that previously assumed ultrafast excitation pathways in fact generated fairly slow nanosecond long bunches. Ionisation time could also be a million times slower than assumed if atoms were excited below the classical ionisation threshold. Identification of the conditions required for ultrafast excitation and ionisation ultimately allowed generation of ultrafast cold electron bunches with duration of tens of picoseconds. Electron diffraction using nanosecond long electron bunches was achieved in both transmission and reflection modes for a variety of large samples of inorganic crystals. Bunches were of sufficiently high charge to allow identification of features of a crystal structure using only a single shot. Bragg peaks could also be identified by averaging together many images formed using ultrafast, but low-charge bunches. Simulations were performed to determine the feasibility of using electrons generated in the CAEIS for electron coherent diffractive imaging of nanoscale apertures. It was found that it should be possible to successfully reconstruct the object plane wavefield, even taking into account realistic experimental parameters for partial coherence and noise.
Observing matter on atomic length and time scales simultaneously is now routinely achieved in ultrafast electron and X-ray imaging techniques, but continued advances in both approaches promise to deliver huge leaps in our understanding of all kinds of atomic structures and processes. Both technologies rely on the generation of ultrabright, ultrashort duration electron bunches, with these bunches being used directly to probe the sample in electron diffraction, or to generate ultrabright X-ray pulses in X-ray free electron lasers. The Cold Atom Electron and Ion Source (CAEIS) was conceived as a possible way to generate ultrafast electron bunches that are brighter than can currently be produced, with the aim of enabling next-generation structural determination techniques, particularly those based on electron diffraction. The CAEIS generates electrons by near-threshold photoionisation of an atomic gas, which has been shown to produce electron bunches with temperature as low as 10K. Such cold electron bunches have the potential to be much brighter than those generated from solid photocathode sources, which typically have temperatures in the thousands of Kelvin range. Extremely cold ions are also generated in the CAEIS, which show great potential for use in ion microscopy and milling. This thesis presents work on a number of different aspects of the continued development of the cold atom electron and ion source, with a particular emphasis on progress towards ultrafast single-shot electron diffraction based experiments. The brightness degrading effects of space-charge repulsion are investigated using nanosecond duration ion bunches as analogues of ultrafast, picosecond duration electron bunches. Ion bunch shaping was achieved through tailoring of the spatial profile of lasers used in ionisation of the atomic gas. It was found that atomic fluorescence could substantially reduce the fidelity with which the ion bunch profile could be controlled, but methods were developed to circumvent the fluorescence problem. The improved shaping procedures allowed generation of uniformly filled ellipsoidal bunches, which theoretically will not suffer emittance degradation under space-charge expansion. Emittance measurements following space-charge driven expansion showed that these uniformly filled ellipsoids did indeed have reduced emittance growth compared to other profiles. Photoexcitation and field-ionisation processes involved in generation of cold electrons on ultrafast timescales were investigated, with the aim of determining the mechanisms that affect the ultimate electron bunch duration. Bunch duration was measured for a range of excitation conditions, with the finding that previously assumed ultrafast excitation pathways in fact generated fairly slow nanosecond long bunches. Ionisation time could also be a million times slower than assumed if atoms were excited below the classical ionisation threshold. Identification of the conditions required for ultrafast excitation and ionisation ultimately allowed generation of ultrafast cold electron bunches with duration of tens of picoseconds. Electron diffraction using nanosecond long electron bunches was achieved in both transmission and reflection modes for a variety of large samples of inorganic crystals. Bunches were of sufficiently high charge to allow identification of features of a crystal structure using only a single shot. Bragg peaks could also be identified by averaging together many images formed using ultrafast, but low-charge bunches. Simulations were performed to determine the feasibility of using electrons generated in the CAEIS for electron coherent diffractive imaging of nanoscale apertures. It was found that it should be possible to successfully reconstruct the object plane wavefield, even taking into account realistic experimental parameters for partial coherence and noise.
This thesis presents the development of a new apparatus, and imaging tech- niques, used to produce shaped cold electron bunches from ultracold plasma (UCP). Due to their low temperature, cold electron bunches from UCP have the potential to provide a compact electron source with sufficient brightness and coherence to enable single-shot ultrafast diffractive imaging of nano-scale samples, such as bio-molecules.
To create the electron bunch, a cold (70 μK) cloud of 108 rubidium-85 atoms was prepared in a magneto optical trap (MOT). Some of the atoms were excited to an intermediate state using a laser with a spatially varying in- tensity profile, then ionised by a second laser pulse. The shaped excitation laser allowed two-dimensional control of the electron density. The ionisation laser could, in principle, also be spatially varying, to allow three dimensional manipulation of the electron bunch shape. Due to Coulomb repulsion betweeen electrons within a bunch, the brightness of the source is critically dependent on its initial shape, and therefore the shape of the atom cloud. Uniform density bunches are particularly desirable due to their linear space-charge expansion. To optimise the source through production of uniform bunches, knowledge of the spatial density distribution of atoms in the cloud is required. Conventional imaging techniques for cold atoms are either technically demanding or destructive to the atom cloud, and are unsuitable for this application, providing direct motivation for the development of new methods. I have developed two new imaging techniques for use in shaped electron bunch production. The new techniques are particularly suited to our application, but are applicable to the cold atom research community in general, offer- ing several advantages over conventional methods. The first method adapts a phase-contrast imaging technique to measure the spatial distribution of atoms in a specific excited state. The second approach allows single-shot imaging of inhomogeneous atom clouds; that is, where both the density and refractive index may be spatially varying. The method uses a perturbative approach in conjunction with phase retrieval based on the transport of in- tensity equation. This technique is also potentially valuable for studies of atomic coherence effects in cold atoms and was demonstrated using spatially modulated electromagnetically induced transparency.
In collaboration with other members of our research group and in parallel with the imaging research, I also designed and constructed a new appara- tus to produce UCP. The experiment first produced electron bunches in late 2009, and using the imaging techniques I developed, the results of the first shaped electron bunches from UCP are presented here. Due to the low tem- perature of the electrons, such shaped bunches can only be produced and observed using a cold electron source. Conventional thermal sources, includ- ing photoemission and field emission sources, produce hot electrons whose high temperature immediately diffuses any initial structure. The effects of increased electron temperature on the quality of the bunch shape are inves- tigated here, resulting in the conclusion that cold electrons are essential for observing, and thus optimising, shaped bunches. Arbitrarily shaped bunches are demonstrated for the first time, using an intensity shaped excitation laser beam followed by uniform ionisation of the excited atom distribution. The laser intensity profile is adjusted using a spatial light modulator (SLM). Variations in atomic density which would degrade the bunch shape are measured using the imaging techniques developed. Adjustment of the excitation laser intensity to compensate for atomic density is shown to produce uniform bunches in two dimensions. Quantitative analysis of the acuity of the bunch edge provides an upper limit to the electron temperature of T = 35 K. Unlike photoemission sources, the electron bunch shaping mechanism demonstrated here can easily be generalised to three dimensions. In addition, field ionisa- tion of Rydberg atoms is observed to play an important role in the ionisation process, and suggested as a future avenue of research.
Electron microscopy and diffraction have long been used to study the structure of materials. A recent development is the achievement of ultrafast time resolution using high-repetition rate single electron sources and single-shot many-electron sources. Achieving large coherence lengths under these conditions is challenging due to intrinsic heating mechanisms including inter-particle Coulombic forces. Near-threshold, pulsed photoionization of atoms trapped and cooled with lasers is being investigated as a means to produce intense electron pulses with large intrinsic coherence length due to a low electron temperature. Photo-ionizaton sources are, of course, not an entirely new idea but recent implementations using trapped atoms offer new possibilities. Several properties of electron beams extracted from such ultracold sources have already been investigated, showing in particular that temperatures of a few Kelvin and emittances in the nanometer-radian range can be achieved with tens of thousands electrons per pulse for nanosecond pulse lengths. This can be combined with delicate shaping of the charge distribution to counteract emittance growth due to non-linear self fields. Using ultrafast lasers for the ionization step, shorter electron pulses can be achieved, but an interesting question is whether the concomitant spread in photon energy still allows for low electron temperature. Recent experiments have shown that few-Kelvin temperatures combined with picosecond pulse lengths are indeed possible. It turns out that this can be understood with a classical model for electron trajectories resulting from photoionization. In addition, experimentally observed polarization effects are in general agreement with model results. --------------------------------------------------------------------------------
Charged particle sources based on photoionisation of laser cooled atoms can provide unique properties, in particular high spatial coherence and the ability to create complex three-dimensional spatial density distributions, allowing detailed measurement of the internal charged particle interactions. Cold electrons extracted from laser cooled atoms promise the spatial coherence and high current required for picosecond molecular scale imaging. Similarly, sources of cold ions provide the opportunity of ion microscopy and ion beam milling with unprecedented resolution. We use arbitrary and real-time control of the electron and ion bunch shapes to demonstrate and measure the high spatial coherence of the cold atom electron and ion source.
Charged particle sources based on photoionisation of laser cooled atoms can provide unique properties, in particular high spatial coherence and the ability to create complex three-dimensional spatial density distributions, allowing detailed measurement of the internal charged particle interactions. Cold electrons extracted from laser cooled atoms promise the spatial coherence and high current required for picosecond molecular scale imaging. Similarly, sources of cold ions provide the opportunity of ion microscopy and ion beam milling with unprecedented resolution. We use arbitrary and real-time control of the electron and ion bunch shapes to demonstrate and measure the high spatial coherence of the cold atom electron and ion source.
This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies.
The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source.
The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than ��175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources.
The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches.
Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.
UltraCold Ion Beam Source. Focused ion beam (FIB) machines are largely used in the semiconductor industry mainly for imaging, milling and deposition of material, at the nanometer scale. To keep up with the trend of making smaller and smaller components, FIBs need to be continuously improved. A FIB is mainly made of an ion source and a focusing column. In this thesis, two concepts of ion sources are presented, modeled and discussed. The ultra-cold ion source (UCIS) is based on creating very cold ion beams (T <1 mK) by near-threshold photo-ionization of a laser-cooled and trapped atomic gas. In our experiment, 85Rb atoms are confined in a magneto optical trap built directly inside an accelerator structure. A spherical portion of the atom cloud is ionized with a 2-step ionization process and the bunched ions are accelerated by either a DC or a pulsed electric field. The liquid-metal ion source (LMIS) is the current state-of-art for focused ion beam technology, having a reduced brightness of 106 A/m2 sr eV. The reduced brightness characterizes the source and is proportional to the ion current and inversely proportional to the beam emittance (closely related with the source temperature). A high brightness is of importance as much as a low energy spread of the ion beam, since the latter is related with the focus ability of the beam. We have already shown that the UCIS can provide much lower energy spread (20 meV) than LMIS (˜ 4.5 eV), see Reijnders et al. (PRL, 2009), but not yet in combination with a high brightness as well. The energy spread is the limiting factor for the final achievable spot size in a FIB based on a LMIS. Chapter 3 and 4 present measurements of the source temperature and of the extracted current to complete the characterization of the UCIS. The ultra low temperature of the source permits collimated bunches to be created at low kinetic energy (down to few eV), which allows using time-dependent fields for accelerating and focusing. With this lens, a transversal ion temperature of (3±2) mK has been measured, as shown in chapter 3. This temperature is an upper limit since it is ten times higher than the expected value. The novel technique of focusing with time-dependent electric field is successfully applied to an ultra cold ion beam. In chapter 4, a dynamic model of the source describing its properties under pulsed operation has been developed and experiments validated it. A maximum average ion current of (13 ± 1) pA has been extracted from the UCIS and this is enough for imaging (1-100 pA are used). Those results correspond to a source reduced brightness of (8 ± 1) × 104 A/m2 sr eV with 0.9 eV energy spread. This result is 12.5 times lower than the brightness of a LMIS. An interesting "pushing effect", due to the laser used to excite the atoms in the cloud, is described as well. Particle tracking simulations show that disorder induced heating has an important effect on the brightness, lowering its value by 1-2 orders of magnitude depending on the extracted current. Calculations and simulations of a different ion source, the atomic beam laser-cooled ion source (ABLIS), are presented in chapter 6. The follow-up project is based on a similar idea as an UCIS but aims for production of ion beams from a much higher initial atomic flux. The atoms originate from a Knudsen cell and, after being cooled and compressed transversally with laser cooling and trapping techniques, are photo-ionized and accelerated. The source size is reduced as well with respect to the UCIS. Realistic particle tracking simulations with 87Rb show that disorder induced heating is still very important, but in certain conditions, the so-called "pencil-beam" regime is reached and the disorder-induced heating does not deteriorate the brightness anymore. Depending on the extracted current, it is possible to reach a reduced brightness of 2 × 107 A/m2 sr eV with an ion current of 22 pA (corresponding to a final aperture diameter df = 1.6 µm) and an energy spread of 0.7 eV can be achieved. This source is likely capable of provide a high brightness and a low energy spread at the same time. The calculations are done assuming a purified 87Rb source. Eventually, it is possible to reach very high current (1 nA), making the ABLIS ideal also for milling applications with FIBs.