Superconducting nanowire single-photon detectors (SNSPDs) can be made sensitive to single photons with near-unity detection efficiency, ultra-low dark-count rates, and sub-nanosecond timing jitter over a broad wavelength range. However, many studies report data inconsistently, often emphasizing a single performance metric without considering overall device performance. This inconsistent data reporting limits the field, as it makes it difficult to determine which device characteristics are most important. Different applications require functionalities that may conflict with one another; for example, longer-wavelength operation may require lower operating temperatures. Moreover, there is no universally accepted metric for defining the figures of merit of an SNSPD. In this work, we amass a dataset representing the state of the art of SNSPD fabrication, including operating temperature, operating wavelength, photon count rates (PCR), and dark count rates (DCR). We fit the PCR curves and suggest using the saturation plateau length to gauge the SNSPD's sensitivity. We then fit the DCR and compare the PCR and DCR. Using this approach, we establish a quantitative framework to determine the optimal biasing condition for a given device and to determine the device's sensitivity at that optimal biasing condition, enabling meaningful comparisons across disparate devices. Additionally, we offer concrete benchmarks for measuring device performance.
Superconducting nanowire single-photon detectors (SNSPDs) can be made sensitive to single photons with near-unity detection efficiency, ultra-low dark-count rates, and sub-nanosecond timing jitter over a broad wavelength range. However, many studies report data inconsistently, often emphasizing a single performance metric without considering overall device performance. This inconsistent data reporting limits the field, as it makes it difficult to determine which device characteristics are most important. Different applications require functionalities that may conflict with one another; for example, longer-wavelength operation may require lower operating temperatures. Moreover, there is no universally accepted metric for defining the figures of merit of an SNSPD. In this work, we amass a dataset representing the state of the art of SNSPD fabrication, including operating temperature, operating wavelength, photon count rates (PCR), and dark count rates (DCR). We fit the PCR curves and suggest using the saturation plateau length to gauge the SNSPD's sensitivity. We then fit the DCR and compare the PCR and DCR. Using this approach, we establish a quantitative framework to determine the optimal biasing condition for a given device and to determine the device's sensitivity at that optimal biasing condition, enabling meaningful comparisons across disparate devices. Additionally, we offer concrete benchmarks for measuring device performance.
Detecting single photons is essential for applications such as dark matter detection, quantum science and technology, and biomedical imaging. Superconducting nanowire single-photon detectors (SNSPDs) excel in this task due to their near-unity detection efficiency, subhertz dark count rates, and picosecond timing jitter. However, a local increase of current density (current crowding) in the bends of meander-shaped SNSPDs limits these performance metrics. By locally irradiating the SNSPD’s straight segments with helium ions while leaving the bends unirradiated, we realize current crowding–free SNSPDs with simultaneously enhanced sensitivity: After irradiation with 800 ions nm −2 , locally irradiated SNSPDs showed a relative saturation plateau width of 37%, while fully irradiated SNSPDs reached only 10%. This larger relative plateau width allows operation at lower relative bias currents, thereby reducing the dark count rate while still detecting single photons efficiently. We achieve an internal detection efficiency of 94% with 7 mHz dark count rate near the onset of saturating detection efficiency for a wavelength of 780 nm.
Superconducting nanowire single-photon detectors (SNSPDs) combine high detection efficiency, low noise, and excellent timing resolution, making them a leading platform for photon-counting applications. However, despite decades of materials and fabrication research, detector performance has never been shown to match theoretical performance expectations. Here, we demonstrate for the first time in situ tuning of a detector from its typical, suboptimal operation, to a regime limited only by material quality, allowing the device to reach its intrinsic performance limit. Our approach is based on current-biased superconducting "rails" placed on either side of the detector that redistribute current across its width to achieve its peak performance. This technique reduces the dark count rate by ten orders of magnitude. Further, we show operation at this intrinsic performance limit for devices up to 0.1 mm wide, and also demonstrate near-unity internal detection efficiency (IDE) at a wavelength of 4um for a 20um-wide detector--a factor of 20 wider than the current state of the art. This work enables future detectors to overcome the Pearl limit for device width, paving the way for arbitrarily large detectors.
For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for wavelengths below 400 nm. Here, we describe the design, fabrication, and characterization of UV SNSPDs operating at wavelengths between 250 and 370 nm. The detectors have active areas up to 56 μm in diameter, 70 - 80% efficiency at temperatures up to 4.2 K, timing resolution down to 60 ps FWHM, blindness to visible and infrared photons, and dark count rates of ∼ 0.25 counts/hr for a 56 μm diameter pixel. These performance metrics make UV SNSPDs ideal for applications in trapped-ion quantum information processing, lidar studies of the upper atmosphere, UV fluorescent-lifetime imaging microscopy, and photon-starved UV astronomy.
Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.
We present our semiempirical approach for modeling Dark Count Rate (DCR) and Quantum Efficiency (QE) of current biased Superconducting Nanowire Single Photon Detectors (SNSPDs). Using the qualitative outcomes of the present SNSPD models, we define new quantitative parameters including hotspot lifetime, resistive barrier generation rates and detector dead time to mathematically integrate different physical phenomena of the device into a unified model. The capability of the model to predict the outcomes of the measurements is demonstrated by reporting the details of the supporting experiments and showing a good agreement between simulation and experimental results.
Single-photon sources and detectors are key enabling technologies for photonics in quantum information science and technology (QIST). QIST applications place high-level demands on the performance of sources and detectors; it is therefore essential that their properties can be characterized accurately. Superconducting nanowire single-photon detectors (SNSPDs) have spectral sensitivity from visible to beyond 2 μm in wavelength, picosecond timing resolution (Jitter <100 ps FWHM) and the capacity to operate ungated with low dark counts (<1 kHz). This facilitates data acquisition at high rates with an excellent signal-to-noise ratio. We report on the construction and characterization of a two-channel SNSPD system. The detectors are mounted in a closed-cycle refrigerator, which eliminates reliance on liquid cryogens. Our specification was to deliver a system with 1% efficiency in both channels at a wavelength of 1310 nm with 1 kHz dark count rate. A full width at half maximum timing jitter of less than 90 ps is achieved in both channels. The system will be used to detect individual photons generated by quantum-optical sources at telecom wavelengths. Examples include single-photon sources based on quantum dots (emitting at 1310 nm). The SNSPD system's spectral sensitivity and timing resolution make it suited to characterization of such sources, and to wider QIST applications.