Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.14391

Implementing rapid reset of superconducting qubits with on-chip dissipation

Feiyu Li, Yang Liu, Zhen Yang, Zhenxing Liu, Jiayu Ding, Yang Gao, Xuehui Liang, Weijie Sun, Yanjun Ma, Chuhong Yang, Guangming Xue, He Wang, Fei Yan

Published Nov 10, 2026• 0 citations
arXivHTMLPDF

Abstract

Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the $|g\rangle-|e\rangle$ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of $0.29\%$ and $0.67\%$ for qubits initialized in $|g\rangle$ and $|e\rangle$, respectively. We further demonstrate efficient leakage removal from the $|f\rangle$ state, reducing its residual population to $0.51\%$. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.

DOI
10.48550/arxiv.2611.14391

Related papers

Resetting a Superconducting Qubit with a Compact Colder Resistive Dissipator below the Qubit Frequency

Jiajia Tian, Meiling Li, Weijie Sun +7 more

Efficient qubit reset has become a key requirement for large-scale superconducting quantum processors, as initialization fidelity increasingly lags behind gate performance and quantum error correction demands rapid, high-fidelity state re-initialization. This work proposes a compact on-chip dissipator consisting of two transmon dissipation modes and a thin-film resistor, and experimentally demonstrates an unconditional reset protocol. With no additional control lines and negligible impact on the qubit $T_1$, the effective temperature of the transmon qubit is reduced from $49$~mK to $35$~mK. Quantum process tomography is employed to benchmark the reset process, achieving a process error of $0.0028$. This reset protocol is robust to pulse parameter deviations, thereby relaxing calibration requirements. The dissipator architecture provides a practical, calibration-friendly reset solution for large-scale superconducting quantum processors.

arXiv:2611.06216•Nov 4, 2026•0 citations

Multipurpose architecture for fast reset and protective readout of superconducting qubits

Jiayu Ding, Yulong Li, He Wang +12 more

The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.

arXiv:2407.21332•Physical Review Applied•Jan 6, 2025•12 citations

Fast unconditional reset and leakage reduction of a tunable superconducting qubit via an engineered dissipative bath

Gihwan Kim, Andreas Butler, Vinicius S. Ferreira +4 more

Rapid and accurate initialization of qubits, known as reset, is a crucial building block for various tasks in quantum information processing, such as quantum error correction and estimation of the statistics of noisy quantum devices with many qubits. We demonstrate unconditional reset of a frequency-tunable transmon qubit that simultaneously resets multiple excited states using a metamaterial waveguide engineered to provide a cold bath over a wide spectral range, while providing strong protection against Purcell decay of the qubit. We report a reset error below 0.13% (0.16%) when prepared in the first (second) excited state of the transmon within 88 ns. In addition, through the sharp roll-off in the density of states of the metamaterial waveguide, we implement a leakage-reduction unit that selectively resets the transmon’s second excited state to 0.285(3)% residual population within 44 ns while acting trivially in the computational subspace as an identity operation that preserves encoded information with an infidelity of 0.72(1)%.

arXiv:2411.02950•Physical Review Applied•Jun 5, 2025•10 citations

Multimode Purcell filter for superconducting-qubit reset and readout with intrinsic Purcell protection

Xu-Yang Gu, Da’er Feng, Zhen-Yu Peng +17 more

Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual $|f\rangle$ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.

arXiv:2507.04676•Physical Review Applied•Mar 3, 2026•3 citations

Fast Reset Protocol for Superconducting Transmon Qubits

Wei-Ping Yuan, Zhicheng He, Sai Li +1 more

For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.

Applied Sciences•Jan 6, 2023•0 citations

Fast qubit initialization in a superconducting circuit*

Tianqi Huang, Wen Zheng, Shuqing Song +5 more

We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.

Chinese Physics B•May 8, 2021•0 citations
Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the ∣g⟩−∣e⟩|g\rangle-|e\rangle∣g⟩−∣e⟩ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of 0.29%0.29\%0.29% and 0.67%0.67\%0.67% for qubits initialized in ∣g⟩|g\rangle∣g⟩ and ∣e⟩|e\rangle∣e⟩, respectively. We further demonstrate efficient leakage removal from the ∣f⟩|f\rangle∣f⟩ state, reducing its residual population to 0.51%0.51\%0.51%. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.
Efficient qubit reset has become a key requirement for large-scale superconducting quantum processors, as initialization fidelity increasingly lags behind gate performance and quantum error correction demands rapid, high-fidelity state re-initialization. This work proposes a compact on-chip dissipator consisting of two transmon dissipation modes and a thin-film resistor, and experimentally demonstrates an unconditional reset protocol. With no additional control lines and negligible impact on the qubit T1T_1T1​, the effective temperature of the transmon qubit is reduced from 494949~mK to 353535~mK. Quantum process tomography is employed to benchmark the reset process, achieving a process error of 0.00280.00280.0028. This reset protocol is robust to pulse parameter deviations, thereby relaxing calibration requirements. The dissipator architecture provides a practical, calibration-friendly reset solution for large-scale superconducting quantum processors.
The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.
Rapid and accurate initialization of qubits, known as reset, is a crucial building block for various tasks in quantum information processing, such as quantum error correction and estimation of the statistics of noisy quantum devices with many qubits. We demonstrate unconditional reset of a frequency-tunable transmon qubit that simultaneously resets multiple excited states using a metamaterial waveguide engineered to provide a cold bath over a wide spectral range, while providing strong protection against Purcell decay of the qubit. We report a reset error below 0.13% (0.16%) when prepared in the first (second) excited state of the transmon within 88 ns. In addition, through the sharp roll-off in the density of states of the metamaterial waveguide, we implement a leakage-reduction unit that selectively resets the transmon’s second excited state to 0.285(3)% residual population within 44 ns while acting trivially in the computational subspace as an identity operation that preserves encoded information with an infidelity of 0.72(1)%.
Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual ∣f⟩|f\rangle∣f⟩ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.
For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.
We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.