Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.06656

Flux Crosstalk Calibration from Zero Knowledge to High Precision in Fully Tunable Superconducting Circuits

Y. Gao, Asier Galicia, J. R. Guimarães, Y. Haddad, Y. Liu, J. Cereijo, D. A. Volkov, H. Bhardwaj, M. Neis, M. Jerger, Pavel A. Bushev, R. Barends

Published Nov 4, 2026• 0 citations
arXivHTMLPDF

Abstract

Precise and independent flux control is essential for scalable superconducting processors built from frequency-tunable qubits and couplers, but flux crosstalk undermines it. Conventional calibration methods rely either on dedicated readout channels, which tunable couplers typically lack, or on readout schemes requiring extensive prior spectroscopy of the qubit and coupler. We demonstrate two independent methods that characterize coupler flux crosstalk without directly driving or measuring the couplers. The first method is zero-knowledge characterization, which exploits intrinsic coupler-resonator coupling to yield rapid and accurate estimates with no prior qubit or coupler spectroscopy, accelerating large scale bring-up. The second method is symmetric branch cancellation, which isolates crosstalk from other dispersive effects allowing for quantifying with high precision. Combined with an improved iterative procedure, these methods suppress residual coupler crosstalk below $5\times10^{-5}$, providing a complete route from zero-knowledge initialization to high-precision crosstalk characterization in fully tunable architectures.

DOI
10.48550/arxiv.2611.06656

Related papers

Characterizing and mitigating flux crosstalk in superconducting qubits–couplers system

Myrron Albert Callera Aguila, N. Li, Chen-Hsun Ma +12 more

Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years. One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning. Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes. Under a multiqubit architecture, flux control (Z) lines are crucial in tuning the frequency of the qubits and couplers. However, dense flux lines result in magnetic flux crosstalk, wherein magnetic flux applied to one element inadvertently affects neighboring qubits or couplers. This crosstalk obscures the idle frequency of the qubit when flux bias is applied, which degrades gate performance and calibration accuracy. In this study, we characterize flux crosstalk and suppress it in a multiqubit-coupler chip with multi-Z lines without adding additional readout for couplers. By quantifying the mutual flux-induced frequency shifts of qubits and couplers, we construct a cancellation matrix that enables precise compensation of non-local flux, demonstrating a substantial reduction in Z-line crosstalk from 56.5‰ to 0.13‰, which is close to statistical error. Flux compensation corrects the CZ SWAP measurement, leading to a symmetric map with respect to flux bias. Compared with a crosstalk-free calculated CZ SWAP map, the measured map indicates that our approach provides a near-zero crosstalk for the coupler-transmon system. These results highlight the effectiveness of our approach in enhancing flux crosstalk-free control and supporting its potential for scaling superconducting quantum processors.

arXiv:2508.03434•APL Quantum•Feb 18, 2026•5 citations

Characterization of tunable coupler without a dedicated readout resonator in superconducting circuits

Chi Zhang, Tian-Le Wang, Liang-Liang Guo +6 more

Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.

Applied Physics Letters•Jan 9, 2023•12 citations

Calibration of Flux Crosstalk in Large-Scale Flux-Tunable Superconducting Quantum Circuits

Xi Dai, Daniel Tennant, Robbyn Trappen +16 more

Magnetic flux tunability is an essential feature in most approaches to quantum computing based on superconducting qubits.Independent control of the fluxes in multiple loops is hampered by crosstalk.Calibrating flux crosstalk becomes a challenging task when the circuit elements interact strongly.We present a novel approach to flux crosstalk calibration, which is circuit model independent and relies on an iterative process to gradually improve calibration accuracy.This method allows us to reduce errors due to the inductive coupling between loops.The calibration procedure is automated and implemented on devices consisting of tunable flux qubits and couplers with up to 27 control loops.We devise a method to characterize the calibration error, which is used to show that the errors of the measured crosstalk coefficients are all below 0.17%.

arXiv:2105.14360•PRX Quantum•Oct 20, 2021•49 citations

Learning-Based Calibration of Flux Crosstalk in Transmon Qubit Arrays

Cora N. Barrett, Amir H. Karamlou, Sarah E. Muschinske +13 more

Superconducting quantum processors comprising flux-tunable data and coupler qubits are a promising platform for quantum computation. However, magnetic flux crosstalk between the flux-control lines and the constituent qubits impedes precision control of qubit frequencies, presenting a challenge to scaling this platform. In order to implement high-fidelity digital and analog quantum operations, one must characterize the flux crosstalk and compensate for it. In this work, we introduce a learning-based calibration protocol and demonstrate its experimental performance by calibrating an array of 16 flux-tunable transmon qubits. To demonstrate the extensibility of our protocol, we simulate the crosstalk matrix learning procedure for larger arrays of transmon qubits. We observe an empirically linear scaling in calibration time with system size while maintaining a median qubit frequency error below 300 kHz.

arXiv:2303.03347•Physical Review Applied•Aug 28, 2023•25 citations

Inherent flux crosstalk and coupler-driven single-qubit gates in superconducting circuits

Balázs Gulácsi, Guido Burkard

Crosstalk refers to unwanted qubit addressing. This is particularly detrimental when scaling up quantum information systems because unintended interactions limit their overall performance. For superconducting qubits, tunable couplings and frequency tunability achieved through externally applied magnetic fluxes enable high-fidelity entangling gates; however, they also introduce crosstalk through unintended flux coupling. In this work, we investigate the impact of time-dependent external magnetic fluxes in quantized circuits on superconducting qubit couplings. We find that non-trivial cross-voltage driving emerges between capacitively linked qubits when the magnetic flux threading the SQUID loop of a qubit varies in time, in a manner analogous to Faraday's law of induction. Crucially, we show that this effect enables fast single qubit control through the coupler element in standard tunable-coupler architectures, potentially eliminating the need for individual microwave $XY$ control lines.

quant-pharXiv:2606.10970•Physical Review Applied•Jun 10, 2026•0 citations

High-precision pulse calibration of tunable couplers for high-fidelity two-qubit gates in superconducting quantum processors

Tian-Ming Li, Jiachi Zhang, Bing-Jie Chen +23 more

For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-$Z$ (cz) and $i$swap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.

arXiv:2410.15041•Physical Review Applied•Feb 21, 2025•22 citations
Precise and independent flux control is essential for scalable superconducting processors built from frequency-tunable qubits and couplers, but flux crosstalk undermines it. Conventional calibration methods rely either on dedicated readout channels, which tunable couplers typically lack, or on readout schemes requiring extensive prior spectroscopy of the qubit and coupler. We demonstrate two independent methods that characterize coupler flux crosstalk without directly driving or measuring the couplers. The first method is zero-knowledge characterization, which exploits intrinsic coupler-resonator coupling to yield rapid and accurate estimates with no prior qubit or coupler spectroscopy, accelerating large scale bring-up. The second method is symmetric branch cancellation, which isolates crosstalk from other dispersive effects allowing for quantifying with high precision. Combined with an improved iterative procedure, these methods suppress residual coupler crosstalk below 5×10−55\times10^{-5}5×10−5, providing a complete route from zero-knowledge initialization to high-precision crosstalk characterization in fully tunable architectures.
Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years. One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning. Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes. Under a multiqubit architecture, flux control (Z) lines are crucial in tuning the frequency of the qubits and couplers. However, dense flux lines result in magnetic flux crosstalk, wherein magnetic flux applied to one element inadvertently affects neighboring qubits or couplers. This crosstalk obscures the idle frequency of the qubit when flux bias is applied, which degrades gate performance and calibration accuracy. In this study, we characterize flux crosstalk and suppress it in a multiqubit-coupler chip with multi-Z lines without adding additional readout for couplers. By quantifying the mutual flux-induced frequency shifts of qubits and couplers, we construct a cancellation matrix that enables precise compensation of non-local flux, demonstrating a substantial reduction in Z-line crosstalk from 56.5‰ to 0.13‰, which is close to statistical error. Flux compensation corrects the CZ SWAP measurement, leading to a symmetric map with respect to flux bias. Compared with a crosstalk-free calculated CZ SWAP map, the measured map indicates that our approach provides a near-zero crosstalk for the coupler-transmon system. These results highlight the effectiveness of our approach in enhancing flux crosstalk-free control and supporting its potential for scaling superconducting quantum processors.
Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.
Magnetic flux tunability is an essential feature in most approaches to quantum computing based on superconducting qubits.Independent control of the fluxes in multiple loops is hampered by crosstalk.Calibrating flux crosstalk becomes a challenging task when the circuit elements interact strongly.We present a novel approach to flux crosstalk calibration, which is circuit model independent and relies on an iterative process to gradually improve calibration accuracy.This method allows us to reduce errors due to the inductive coupling between loops.The calibration procedure is automated and implemented on devices consisting of tunable flux qubits and couplers with up to 27 control loops.We devise a method to characterize the calibration error, which is used to show that the errors of the measured crosstalk coefficients are all below 0.17%.
Superconducting quantum processors comprising flux-tunable data and coupler qubits are a promising platform for quantum computation. However, magnetic flux crosstalk between the flux-control lines and the constituent qubits impedes precision control of qubit frequencies, presenting a challenge to scaling this platform. In order to implement high-fidelity digital and analog quantum operations, one must characterize the flux crosstalk and compensate for it. In this work, we introduce a learning-based calibration protocol and demonstrate its experimental performance by calibrating an array of 16 flux-tunable transmon qubits. To demonstrate the extensibility of our protocol, we simulate the crosstalk matrix learning procedure for larger arrays of transmon qubits. We observe an empirically linear scaling in calibration time with system size while maintaining a median qubit frequency error below 300 kHz.
Crosstalk refers to unwanted qubit addressing. This is particularly detrimental when scaling up quantum information systems because unintended interactions limit their overall performance. For superconducting qubits, tunable couplings and frequency tunability achieved through externally applied magnetic fluxes enable high-fidelity entangling gates; however, they also introduce crosstalk through unintended flux coupling. In this work, we investigate the impact of time-dependent external magnetic fluxes in quantized circuits on superconducting qubit couplings. We find that non-trivial cross-voltage driving emerges between capacitively linked qubits when the magnetic flux threading the SQUID loop of a qubit varies in time, in a manner analogous to Faraday's law of induction. Crucially, we show that this effect enables fast single qubit control through the coupler element in standard tunable-coupler architectures, potentially eliminating the need for individual microwave XYXYXY control lines.
For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-ZZZ (cz) and iiiswap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.