Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.02209

From Fabrication Disorder to Quantum-Protocol Yield in Inverse-Designed Silicon Photonic Beam Splitters

Nail Letty, Tahmeed Ul Islam, Wayesh Qarony

quant-phSubmitted Nov 1, 2026• Announced Nov 3, 2026
arXivHTMLPDF

Abstract

Telecom-band silicon spin-photon qubits offer a promising platform for scalable quantum networks and distributed information processing, but their fixed emission wavelengths require compact, low-loss beam splitters with precise splitting and fabrication robustness. Conventional designs can face trade-offs between footprint, optical performance, and wavelength-specific operation. Here, we employ adjoint-based inverse design to optimize photonic geometries beyond conventional layouts, developing 1*2 Y-splitters and 2*2 directional couplers for the silicon T (1326 nm) and Al1 (1482.44 nm) spin-photon qubits. The devices achieve footprints of 2.9 and 26 um^2, respectively, with excess losses of 0.14-0.44 dB and back-reflection below 5*10^-4. We assess fabrication tolerance using 100-realization Monte Carlo simulations incorporating etch bias, line-edge roughness, thickness, and refractive-index variations. Mirror symmetry reduces the splitting-ratio spread of the Y-splitter by a factor of seven to nine relative to the directional coupler. We translate these variations into dual-rail fidelity, ideal splitting-ratio-limited Hong-Ou-Mandel visibility, and random-number min-entropy. All realizations satisfy a protocol-performance threshold of 0.95. At 0.99, the tolerated splitting-ratio deviation shrinks from 0.035 for visibility to 0.0035 for min-entropy, and the simulated yields are 68% (T) and 91% (Al1) for coupler visibility and 90% (T) and 66% (Al1) for Y-splitter min-entropy. The tolerance of the target protocol, rather than the device alone, therefore sets the fabrication requirement for silicon spin-photon beam splitters.

AI Summary

This paper examines how fabrication disorder in compact silicon photonic beam splitters translates into performance and yield for quantum protocols at the fixed emission wavelengths of T ($1326$ nm) and Al1 ($1482.44$ nm) spin–photon qubits. It uses adjoint-based inverse design to develop $1\times2$ Y-splitters and $2\times2$ directional couplers, then maps simulated fabrication-induced splitting-ratio variations to protocol metrics. The reported device footprints are $2.9$ and $26\,\mu\mathrm{m}^2$, respectively, with excess losses of $0.14$–$0.44$ dB and back-reflection below $5\times10^{-4}$. Fabrication tolerance is evaluated using 100-realization Monte Carlo simulations incorporating etch bias, line-edge roughness, thickness variation, and refractive-index variation. Mirror symmetry reduces the Y-splitter splitting-ratio spread by a factor of seven to nine relative to the directional coupler. The protocol analysis considers dual-rail fidelity, ideal splitting-ratio-limited Hong–Ou–Mandel visibility, and random-number min-entropy. All simulated realizations meet a performance threshold of $0.95$. At a threshold of $0.99$, the allowed splitting-ratio deviation is approximately $0.035$ for visibility but $0.0035$ for min-entropy. Simulated coupler visibility yields are $68\%$ for T and $91\%$ for Al1; Y-splitter min-entropy yields are $90\%$ and $66\%$, respectively. The results therefore quantify protocol-dependent fabrication requirements rather than a single device-level tolerance. The evidence described in the abstract is simulation-based, not a fabricated-device demonstration, and the stated Hong–Ou–Mandel metric is ideal and limited to splitting-ratio effects. The full text is unavailable for assessing further assumptions or limitations.

No sign of AI-generated textIncrementalMissing comparison

Written by gpt-6.1-sol from the abstract only. Automated: it can be wrong.

Comments
37 pages, 8 figures

Related papers

Inverse-Designed Nanobeam Cavities for High-Cooperativity Spin-Photon Interfaces in Silicon

Nail Letty, Md Sakibul Islam, Wayesh Qarony

Telecom-band spin defects in silicon offer a compelling platform for integrated quantum networks by combining scalable silicon photonics with spin-based quantum memories and multiqubit registers. The T center and recently demonstrated Al1 center are particularly promising, but their limited coherent zero-phonon emission requires strong cavity enhancement for efficient spin-photon interfaces. Here, we inverse-design silicon nanobeam cavities for both centers using a unified adjoint-optimization framework targeting Purcell enhancement, resonance alignment, and photon extraction. For each emitter, symmetric cavities maximize Purcell enhancement, while asymmetric cavities provide directional coupling to an integrated waveguide. Three-dimensional finite-difference time-domain simulations yield loaded quality factors up to 3.25 x 10^6, Purcell factors up to 1.43 x 10^5, and cooperativities of approximately 280-5000, corresponding to cavity-coupled emission fractions exceeding 99.6%. The asymmetric cavities direct approximately 90% of emitted power into a single on-chip waveguide while maintaining cooperativity above 280. Under nanometer-scale fabrication perturbations, all four designs remain within the high-cooperativity regime, and high cooperativity persists when the cavity quality factor is constrained to a realistic absorption-limited value of 10^5. This unified, fabrication-compatible framework establishes a scalable cavity-design route for silicon telecom spin-photon interfaces and, to our knowledge, the first cavity designs for the Al1 center.

quant-pharXiv:2609.32205•Sep 29, 2026

Design of polarization-insensitive high-visibility silicon-on-insulator quantum interferometer

Jingjing Zhang, Kai Guo, Minghong Gao +2 more

We based on integrated silicon-on-insulator platforms design the key components of an on-chip interferometer, beam splitter and directional coupler included, valid in high-visibility interference at telecommunication wavelengths. Special attention is given to the equal-proportion beam splitting and directional coupling, which is achieved by carefully designing the geometric dimension of multi-mode interferometer structure. The proposed interferometer facilitates low loss, broad operating bandwidth, anticipated large tolerance on size variation induced in fabrication procedures, based on a particular wafer with silicon layer thickness of 320 nm. The most highlight property of polarization-insensitive, enables the path-selective qubits generation for bi-polarization that further makes possible quantum key distribution using high dimensional protocols. We numerically demonstrate interference at 1550 nm with visibilities of 99.50% and 93.99% for transverse-electric and transverse-magnetic polarization, respectively, revealing that the proposed interferometer structure is well capable of on-chip optical control especially in quantum optics regime.

Scientific Reports•Sep 26, 2018•7 citations

Color-Center-Compatible Freestanding Diamond Directional Couplers for Quantum Photonics

Colin Sauerzapf, Tom Jäger, Jonathan Enßlin +6 more

Abstract Freestanding all-diamond color-center photonics is a promising platform for optical integration of spin-based quantum defects. Within this geometry, we realize a key building block for quantum-network interconnects: a directional coupler that acts as an on-chip beam splitter. We design and simulate directional couplers with triangular cross sections using eigenmode and finite-difference time-domain simulations and target near-50:50 splitting at visible wavelengths. We fabricate the devices directly from bulk single-crystal diamond by angled oxygen reactive-ion-beam etching followed by a dry postrelease hard-mask removal process. Room-temperature measurements at λ0 ≈ 637 nm yield a mean coupling ratio of Cmeas = 46(16) %. Finally, we integrate tin-vacancy (SnV–) centers into the nanophotonic structures and observe near-lifetime-limited optical line widths and coherent optical Rabi oscillations without postfabrication annealing, identifying the platform as a viable route toward integrated diamond quantum photonics.

arXiv:2606.24576•ACS Photonics•Sep 2, 2026•0 citations

Quantum optics in silicon nanophotonics

Heedeuk Shin

Silicon-on-insulator (SOI) wafers have been developed for electronic integrated circuits, but are also one of the most promising platforms in photonic integrated circuits due to its low loss, high refractive index, ability to fast phase modulation, and well-developed fabrication technologies. With advantages to handle light with a small volume and high modulation speed, silicon photonics has been intensively investigated as the next generation platform of signal processing, interconnection, and communication devices. Recently, silicon photonics has been attracted great interests in quantum optics communities as optical quantum systems for linear optical quantum computing are achievable using silicon photonic components including beam splitters, phase modulators, and filters and the small footprint of a silicon photonic quantum system has unprecedented performances of high stability and scalability. Here we show our recent results on the fabrication of silicon photonic elements for quantum applications. We fabricated low-loss optical waveguides, efficient fiber-to-waveguide grating couplers, resonator-based optical filters, and tunable beam splitters and tested their performances. A micro-sized heater is attached on a Mach-Zehnder interferometer, showing stable operation as a slow phase modulator. In addition, phase modulators using plasma dispersion effects are under investigation. Finally, the quantum characteristics of photon pairs generated by spontaneous four-wave mixing in silicon waveguides are investigated. These results will be an essential cornerstone for the realization of quantum optical computing and quantum communication devices.

•Apr 25, 2019•0 citations

Near-unity quantum interference of transverse spatial modes in an ultra-compact inverse-designed photonic device

Jamika Ann Roque, Daniel Peace, Simon White +6 more

Transverse spatial modes as a degree of freedom is an untapped resource for scaling up integrated photonic quantum computing. To be practically useful for improving scalability, reliable and high-visibility quantum interference between transverse spatial modes on-chip needs to be demonstrated. We show repeatable quantum interference using inverse-designed transverse mode beam splitters that have an ultra-compact footprint of 3 × 3 μm2—the smallest transverse mode beam splitters for 1550 nm photons to date. We measure a Hong–Ou–Mandel visibility of up to 99.56% ± 0.62% from a single device, with an average visibility across three identical devices of 99.38% ± 0.41%, indicating a high degree of reproducibility. Our work demonstrates that inverse-designed components are suitable for engineering quantum interference on-chip of multimode devices, paving the way for future compact integrated quantum photonic devices that exploit transverse spatial modes as a degree of freedom for high-dimensional quantum information.

arXiv:2505.08668•APL Photonics•Feb 1, 2026•1 citation

Broadband wavelength-flattened directional coupler on silicon nitride for quantum photonic integrated circuits

Mauricio Gómez-Robles, Ferney Castro-Simanca, Essowéréo Tchao +4 more

Integrated silicon nitride photonics has emerged as a key enabling technology for quantum technologies. Among the essential devices, beam splitters in the form of integrated directional couplers are widely used in circuits such as Hong-Ou-Mandel (HOM) interferometry. However, the wavelength-dependent nature of these couplers limits their use in experiments involving broadband photons. In this work, we experimentally demonstrate a wavelength-flattened directional coupler on the silicon nitride platform, exhibiting a nearly wavelength-flattened splitting ratio over the measured telecom wavelength range. This integrated photonic circuit is compatible with broadband quantum photonic circuits, including HOM interferometry, and supports the development of integrated single- and photon-pair sources.

Nanotechnology•Jun 10, 2026•0 citations
Telecom-band silicon spin-photon qubits offer a promising platform for scalable quantum networks and distributed information processing, but their fixed emission wavelengths require compact, low-loss beam splitters with precise splitting and fabrication robustness. Conventional designs can face trade-offs between footprint, optical performance, and wavelength-specific operation. Here, we employ adjoint-based inverse design to optimize photonic geometries beyond conventional layouts, developing 12 Y-splitters and 22 directional couplers for the silicon T (1326 nm) and Al1 (1482.44 nm) spin-photon qubits. The devices achieve footprints of 2.9 and 26 um^2, respectively, with excess losses of 0.14-0.44 dB and back-reflection below 5*10^-4. We assess fabrication tolerance using 100-realization Monte Carlo simulations incorporating etch bias, line-edge roughness, thickness, and refractive-index variations. Mirror symmetry reduces the splitting-ratio spread of the Y-splitter by a factor of seven to nine relative to the directional coupler. We translate these variations into dual-rail fidelity, ideal splitting-ratio-limited Hong-Ou-Mandel visibility, and random-number min-entropy. All realizations satisfy a protocol-performance threshold of 0.95. At 0.99, the tolerated splitting-ratio deviation shrinks from 0.035 for visibility to 0.0035 for min-entropy, and the simulated yields are 68% (T) and 91% (Al1) for coupler visibility and 90% (T) and 66% (Al1) for Y-splitter min-entropy. The tolerance of the target protocol, rather than the device alone, therefore sets the fabrication requirement for silicon spin-photon beam splitters.
This paper examines how fabrication disorder in compact silicon photonic beam splitters translates into performance and yield for quantum protocols at the fixed emission wavelengths of T (132613261326 nm) and Al1 (1482.441482.441482.44 nm) spin–photon qubits. It uses adjoint-based inverse design to develop 1×21\times21×2 Y-splitters and 2×22\times22×2 directional couplers, then maps simulated fabrication-induced splitting-ratio variations to protocol metrics.
The reported device footprints are 2.92.92.9 and 26 μm226\,\mu\mathrm{m}^226μm2, respectively, with excess losses of 0.140.140.14–0.440.440.44 dB and back-reflection below 5×10−45\times10^{-4}5×10−4. Fabrication tolerance is evaluated using 100-realization Monte Carlo simulations incorporating etch bias, line-edge roughness, thickness variation, and refractive-index variation. Mirror symmetry reduces the Y-splitter splitting-ratio spread by a factor of seven to nine relative to the directional coupler.
The protocol analysis considers dual-rail fidelity, ideal splitting-ratio-limited Hong–Ou–Mandel visibility, and random-number min-entropy. All simulated realizations meet a performance threshold of 0.950.950.95. At a threshold of 0.990.990.99, the allowed splitting-ratio deviation is approximately 0.0350.0350.035 for visibility but 0.00350.00350.0035 for min-entropy. Simulated coupler visibility yields are 68%68\%68% for T and 91%91\%91% for Al1; Y-splitter min-entropy yields are 90%90\%90% and 66%66\%66%, respectively.
The results therefore quantify protocol-dependent fabrication requirements rather than a single device-level tolerance. The evidence described in the abstract is simulation-based, not a fabricated-device demonstration, and the stated Hong–Ou–Mandel metric is ideal and limited to splitting-ratio effects. The full text is unavailable for assessing further assumptions or limitations.
Telecom-band spin defects in silicon offer a compelling platform for integrated quantum networks by combining scalable silicon photonics with spin-based quantum memories and multiqubit registers. The T center and recently demonstrated Al1 center are particularly promising, but their limited coherent zero-phonon emission requires strong cavity enhancement for efficient spin-photon interfaces. Here, we inverse-design silicon nanobeam cavities for both centers using a unified adjoint-optimization framework targeting Purcell enhancement, resonance alignment, and photon extraction. For each emitter, symmetric cavities maximize Purcell enhancement, while asymmetric cavities provide directional coupling to an integrated waveguide. Three-dimensional finite-difference time-domain simulations yield loaded quality factors up to 3.25 x 10^6, Purcell factors up to 1.43 x 10^5, and cooperativities of approximately 280-5000, corresponding to cavity-coupled emission fractions exceeding 99.6%. The asymmetric cavities direct approximately 90% of emitted power into a single on-chip waveguide while maintaining cooperativity above 280. Under nanometer-scale fabrication perturbations, all four designs remain within the high-cooperativity regime, and high cooperativity persists when the cavity quality factor is constrained to a realistic absorption-limited value of 10^5. This unified, fabrication-compatible framework establishes a scalable cavity-design route for silicon telecom spin-photon interfaces and, to our knowledge, the first cavity designs for the Al1 center.
We based on integrated silicon-on-insulator platforms design the key components of an on-chip interferometer, beam splitter and directional coupler included, valid in high-visibility interference at telecommunication wavelengths. Special attention is given to the equal-proportion beam splitting and directional coupling, which is achieved by carefully designing the geometric dimension of multi-mode interferometer structure. The proposed interferometer facilitates low loss, broad operating bandwidth, anticipated large tolerance on size variation induced in fabrication procedures, based on a particular wafer with silicon layer thickness of 320 nm. The most highlight property of polarization-insensitive, enables the path-selective qubits generation for bi-polarization that further makes possible quantum key distribution using high dimensional protocols. We numerically demonstrate interference at 1550 nm with visibilities of 99.50% and 93.99% for transverse-electric and transverse-magnetic polarization, respectively, revealing that the proposed interferometer structure is well capable of on-chip optical control especially in quantum optics regime.
Abstract Freestanding all-diamond color-center photonics is a promising platform for optical integration of spin-based quantum defects. Within this geometry, we realize a key building block for quantum-network interconnects: a directional coupler that acts as an on-chip beam splitter. We design and simulate directional couplers with triangular cross sections using eigenmode and finite-difference time-domain simulations and target near-50:50 splitting at visible wavelengths. We fabricate the devices directly from bulk single-crystal diamond by angled oxygen reactive-ion-beam etching followed by a dry postrelease hard-mask removal process. Room-temperature measurements at λ0 ≈ 637 nm yield a mean coupling ratio of Cmeas = 46(16) %. Finally, we integrate tin-vacancy (SnV–) centers into the nanophotonic structures and observe near-lifetime-limited optical line widths and coherent optical Rabi oscillations without postfabrication annealing, identifying the platform as a viable route toward integrated diamond quantum photonics.
Silicon-on-insulator (SOI) wafers have been developed for electronic integrated circuits, but are also one of the most promising platforms in photonic integrated circuits due to its low loss, high refractive index, ability to fast phase modulation, and well-developed fabrication technologies. With advantages to handle light with a small volume and high modulation speed, silicon photonics has been intensively investigated as the next generation platform of signal processing, interconnection, and communication devices. Recently, silicon photonics has been attracted great interests in quantum optics communities as optical quantum systems for linear optical quantum computing are achievable using silicon photonic components including beam splitters, phase modulators, and filters and the small footprint of a silicon photonic quantum system has unprecedented performances of high stability and scalability. Here we show our recent results on the fabrication of silicon photonic elements for quantum applications. We fabricated low-loss optical waveguides, efficient fiber-to-waveguide grating couplers, resonator-based optical filters, and tunable beam splitters and tested their performances. A micro-sized heater is attached on a Mach-Zehnder interferometer, showing stable operation as a slow phase modulator. In addition, phase modulators using plasma dispersion effects are under investigation. Finally, the quantum characteristics of photon pairs generated by spontaneous four-wave mixing in silicon waveguides are investigated. These results will be an essential cornerstone for the realization of quantum optical computing and quantum communication devices.
Transverse spatial modes as a degree of freedom is an untapped resource for scaling up integrated photonic quantum computing. To be practically useful for improving scalability, reliable and high-visibility quantum interference between transverse spatial modes on-chip needs to be demonstrated. We show repeatable quantum interference using inverse-designed transverse mode beam splitters that have an ultra-compact footprint of 3 × 3 μm2—the smallest transverse mode beam splitters for 1550 nm photons to date. We measure a Hong–Ou–Mandel visibility of up to 99.56% ± 0.62% from a single device, with an average visibility across three identical devices of 99.38% ± 0.41%, indicating a high degree of reproducibility. Our work demonstrates that inverse-designed components are suitable for engineering quantum interference on-chip of multimode devices, paving the way for future compact integrated quantum photonic devices that exploit transverse spatial modes as a degree of freedom for high-dimensional quantum information.
Integrated silicon nitride photonics has emerged as a key enabling technology for quantum technologies. Among the essential devices, beam splitters in the form of integrated directional couplers are widely used in circuits such as Hong-Ou-Mandel (HOM) interferometry. However, the wavelength-dependent nature of these couplers limits their use in experiments involving broadband photons. In this work, we experimentally demonstrate a wavelength-flattened directional coupler on the silicon nitride platform, exhibiting a nearly wavelength-flattened splitting ratio over the measured telecom wavelength range. This integrated photonic circuit is compatible with broadband quantum photonic circuits, including HOM interferometry, and supports the development of integrated single- and photon-pair sources.