Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.01214

Cooling-path-selected self-assembly of telecom InAsP quantum dots

Yiteng Zhang, Doaa Abdelbarey, Markus Etzkorn, Zenghui Jiang, Ankita Choudhary, Andreas Schaate, Tom Fandrich, Xin Cao, Chenxi Ma, Arijit Chakraborty, Eddy Patrick Rugeramigabo, Michael Zopf, Fei Ding

quant-phcond-mat.mes-hallcond-mat.mtrl-sciSubmitted Oct 31, 2026• Announced Nov 3, 2026
arXivHTMLPDF

Abstract

Epitaxial quantum dots are leading solid-state sources of quantum light, but reproducible growth on indium phosphide (InP) remains challenging because dot-formation windows are narrow and emission wavelengths are difficult to predict. Here we report a new epitaxial route for InAsP quantum dots on InP(001), in which the cooling path selects the final morphology without intentional deposition of group-III dot material. High-temperature As exposure forms a shallow near-surface InAsP layer through As-P exchange; the cooling path and continued As supply determine whether three-dimensional islands form. Surface-sensitive spectroscopy shows near-surface As enrichment, while cross-sectional STEM/EELS identifies graded, As-rich InAsP islands. The capped emitters span 1.2-1.6 micrometers, with single-photon emission observed up to 100 K. Across 20 wafers, the surface-effective exchange dose D provides a practical calibration for targeting the median emission wavelength. These results establish cooling as an active epitaxial step for telecom InAsP quantum-dot formation and wavelength control.

AI Summary

The paper asks how cooling history controls quantum-dot formation from an As–P-exchanged InP surface, and whether this provides a route to wavelength-calibrated telecom emitters without intentional deposition of group-III dot material. High-temperature As exposure creates a shallow InAsP layer; subsequent temperature–time and As-flux conditions select the final morphology. Growth-interruption controls show that rapid cooling leaves nearly flat surfaces or shallow protrusions, while slow cooling under continued As exposure, followed by a low-temperature hold, produces large islands. As-off cooling from the same high-temperature stage suppresses island formation. RHEED tracks the surface evolution, angle-resolved XPS establishes near-surface As enrichment, and cross-sectional STEM/EELS identifies graded, As-rich InAsP islands with continuous lattice planes across the observed interface. Capped samples emit across 1.2–1.6 $\mu$m. For one isolated emitter near 1287 nm, fitted, non-background-corrected autocorrelation gives $g^{(2)}(0)=0.07$ at 1.6 K and below 0.25 at 80 and 100 K; its effective decay lifetime is approximately 1.6 ns. Across 20 As-on-cooled wafers, an empirical surface-effective exchange dose correlates with median emission wavelength; grouped means red-shift monotonically, with saturation described by a fit approaching 1538 nm. This is a calibration for the tested conditions, not a kinetic law or retained-As measurement. AFM interruption endpoints do not establish the nucleation time, and the controls do not identify a unique atomistic pathway. Size and composition contributions to wavelength shifts remain unresolved; applicability to other material systems is untested.

Little sign of AI-generated textIncremental

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
9 pages, 4 figures, 1 table. Preprint version

Related papers

Broadband telecom single-photon emissions from InAs/InP quantum dots grown by MOVPE droplet epitaxy

Shichen Zhang, Li Liu, Kai Guo +6 more

The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.

physics.opticsCross-listedarXiv:2511.16894•Nov 24, 2025

Thin-capping layer epitaxial quantum dots for near-field quantum photonics

Yuting Guo, Jonathan Bar-David, Pasquale Cilibrizzi +3 more

Epitaxial quantum dots (QDs) are widely recognised as one of the best quantum light sources, given their good stability, brightness, quantum efficiency and coherence. To reach such properties, QDs are protected from potentially detrimental surface states by a relatively thick capping layer, typically exceeding 50nm. This prevents the implementation of near-field effects, like plasmonic-based ones, that can dramatically increase the light-matter interaction, since the control of the spontaneous emission dynamics and directionality of the emission can only occur if the emitter is in close proximity (typically tens of nanometers or less) from the metallic structures. In this work, we report the growth and optical characterisation of InAs/GaAs QDs with GaAs capping layer thickness of 10nm, 20nm, and a more standard 95nm. Remarkably, we observe emission linewidths up to 5 times smaller than previously reported, with unperturbed excitonic lifetimes. These results demonstrate that the epitaxial QD's high optical quality can be maintained even when the emitters are at reduced distances from the surface, opening the path for the exploration of near-field light-matter interactions with coherent and stable emitters, suitable for quantum technology applications.

physics.opticsCross-listedarXiv:2610.02080•Oct 2, 2026

Two-photon interference from as-grown InAsP/InP quantum dots under detuned excitation

Maja Wasiluk, Anna Musiał, Paweł Mrowiński +3 more

In this study, we investigate as-grown InAsP/InP quantum dots emitting in the third telecommunication window under detuned quasi-resonant excitation. A large excitation-emission detuning of 32 meV enables efficient suppression of scattered laser light while retaining several advantages of near-resonant excitation. The single-photon nature of the emission is confirmed by a Hanbury Brown and Twiss experiment, yielding a raw second-order autocorrelation value of $g_{\mathrm{raw}}^{(2)}(0)=0.076(6)$. Hong-Ou-Mandel measurement is used to determine the degree of indistinguishability of single photons and reveal as measured visibilities of $V=0.094(4)$ and $V=0.106(5)$ for excitation pulse separations of 13.1 ns and 5.3 ns, respectively. These results demonstrate the potential of as-grown InAsP/InP quantum dots grown via molecular beam epitaxy under not experimentally demanding detuned excitation for generating indistinguishable telecom single photons. Further improvements are to be achieved through Purcell enhancement in optical cavities.

quant-pharXiv:2607.26957•Jul 30, 2026•0 citations

Position-Controlled Telecom Single Photon Emitters Operating at Elevated Temperatures

Patrick Laferrière, S. Haffouz, David B. Northeast +3 more

High Resolution Image Download MS PowerPoint Slide A key resource in quantum-secured communication protocols are single photon emitters. For long-haul optical networks, it is imperative to use photons at wavelengths compatible with telecom single mode fibers. We demonstrate high purity single photon emission at 1.31 μm using deterministically positioned InP photonic waveguide nanowires containing single InAsP quantum dot-in-a-rod structures. At excitation rates that saturate the emission, we obtain a single photon collection efficiency at first lens of 27.6% and a probability of multiphoton emission of g (2) (0) = 0.021. We have also evaluated the performance of the source as a function of temperature. Multiphoton emission probability increases with temperature with values of 0.11, 0.34, and 0.57 at 77, 220 and 300 K, respectively, which is attributed to an overlap of temperature-broadened excitonic emission lines. These results are a promising step toward scalably fabricating telecom single photon emitters that operate under relaxed cooling requirements.

arXiv:2210.12833•Nano Letters•Jan 27, 2023•25 citations

Efficient single photon source at telecommunication wavelength

D. Elvira, Rémy Braive, Richard Hostein +15 more

Single photon emission at telecom wavelength is observed in InAsP/InP QDs. These dots will be embedded in a metallic subwavelength plasmonic cavity allowing for broadband Purcell factors allowing the engineering of efficient entangled-photon sources.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2011•1 citation

Efficient Single Photon Source at Telecommunication Wavelength

A. Beveratos, D. Elvira, Rémy Braive +16 more

Single photon emission at telecom wavelength is observed in InAsP/InP QDs. These dots will be embedded in a metallic subwavelength plasmonic cavity allowing for broadband Purcell factors allowing the engineering of efficient entangled-photon sources.

•Jan 1, 2011•0 citations
Epitaxial quantum dots are leading solid-state sources of quantum light, but reproducible growth on indium phosphide (InP) remains challenging because dot-formation windows are narrow and emission wavelengths are difficult to predict. Here we report a new epitaxial route for InAsP quantum dots on InP(001), in which the cooling path selects the final morphology without intentional deposition of group-III dot material. High-temperature As exposure forms a shallow near-surface InAsP layer through As-P exchange; the cooling path and continued As supply determine whether three-dimensional islands form. Surface-sensitive spectroscopy shows near-surface As enrichment, while cross-sectional STEM/EELS identifies graded, As-rich InAsP islands. The capped emitters span 1.2-1.6 micrometers, with single-photon emission observed up to 100 K. Across 20 wafers, the surface-effective exchange dose D provides a practical calibration for targeting the median emission wavelength. These results establish cooling as an active epitaxial step for telecom InAsP quantum-dot formation and wavelength control.
The paper asks how cooling history controls quantum-dot formation from an As–P-exchanged InP surface, and whether this provides a route to wavelength-calibrated telecom emitters without intentional deposition of group-III dot material. High-temperature As exposure creates a shallow InAsP layer; subsequent temperature–time and As-flux conditions select the final morphology.
Growth-interruption controls show that rapid cooling leaves nearly flat surfaces or shallow protrusions, while slow cooling under continued As exposure, followed by a low-temperature hold, produces large islands. As-off cooling from the same high-temperature stage suppresses island formation. RHEED tracks the surface evolution, angle-resolved XPS establishes near-surface As enrichment, and cross-sectional STEM/EELS identifies graded, As-rich InAsP islands with continuous lattice planes across the observed interface. Capped samples emit across 1.2–1.6 μ\muμm. For one isolated emitter near 1287 nm, fitted, non-background-corrected autocorrelation gives g(2)(0)=0.07g^{(2)}(0)=0.07g(2)(0)=0.07 at 1.6 K and below 0.25 at 80 and 100 K; its effective decay lifetime is approximately 1.6 ns.
Across 20 As-on-cooled wafers, an empirical surface-effective exchange dose correlates with median emission wavelength; grouped means red-shift monotonically, with saturation described by a fit approaching 1538 nm. This is a calibration for the tested conditions, not a kinetic law or retained-As measurement. AFM interruption endpoints do not establish the nucleation time, and the controls do not identify a unique atomistic pathway. Size and composition contributions to wavelength shifts remain unresolved; applicability to other material systems is untested.
The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.
Epitaxial quantum dots (QDs) are widely recognised as one of the best quantum light sources, given their good stability, brightness, quantum efficiency and coherence. To reach such properties, QDs are protected from potentially detrimental surface states by a relatively thick capping layer, typically exceeding 50nm. This prevents the implementation of near-field effects, like plasmonic-based ones, that can dramatically increase the light-matter interaction, since the control of the spontaneous emission dynamics and directionality of the emission can only occur if the emitter is in close proximity (typically tens of nanometers or less) from the metallic structures. In this work, we report the growth and optical characterisation of InAs/GaAs QDs with GaAs capping layer thickness of 10nm, 20nm, and a more standard 95nm. Remarkably, we observe emission linewidths up to 5 times smaller than previously reported, with unperturbed excitonic lifetimes. These results demonstrate that the epitaxial QD's high optical quality can be maintained even when the emitters are at reduced distances from the surface, opening the path for the exploration of near-field light-matter interactions with coherent and stable emitters, suitable for quantum technology applications.
In this study, we investigate as-grown InAsP/InP quantum dots emitting in the third telecommunication window under detuned quasi-resonant excitation. A large excitation-emission detuning of 32 meV enables efficient suppression of scattered laser light while retaining several advantages of near-resonant excitation. The single-photon nature of the emission is confirmed by a Hanbury Brown and Twiss experiment, yielding a raw second-order autocorrelation value of graw(2)(0)=0.076(6)g_{\mathrm{raw}}^{(2)}(0)=0.076(6)graw(2)​(0)=0.076(6). Hong-Ou-Mandel measurement is used to determine the degree of indistinguishability of single photons and reveal as measured visibilities of V=0.094(4)V=0.094(4)V=0.094(4) and V=0.106(5)V=0.106(5)V=0.106(5) for excitation pulse separations of 13.1 ns and 5.3 ns, respectively. These results demonstrate the potential of as-grown InAsP/InP quantum dots grown via molecular beam epitaxy under not experimentally demanding detuned excitation for generating indistinguishable telecom single photons. Further improvements are to be achieved through Purcell enhancement in optical cavities.
High Resolution Image Download MS PowerPoint Slide A key resource in quantum-secured communication protocols are single photon emitters. For long-haul optical networks, it is imperative to use photons at wavelengths compatible with telecom single mode fibers. We demonstrate high purity single photon emission at 1.31 μm using deterministically positioned InP photonic waveguide nanowires containing single InAsP quantum dot-in-a-rod structures. At excitation rates that saturate the emission, we obtain a single photon collection efficiency at first lens of 27.6% and a probability of multiphoton emission of g (2) (0) = 0.021. We have also evaluated the performance of the source as a function of temperature. Multiphoton emission probability increases with temperature with values of 0.11, 0.34, and 0.57 at 77, 220 and 300 K, respectively, which is attributed to an overlap of temperature-broadened excitonic emission lines. These results are a promising step toward scalably fabricating telecom single photon emitters that operate under relaxed cooling requirements.