Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.02080

Thin-capping layer epitaxial quantum dots for near-field quantum photonics

Yuting Guo, Jonathan Bar-David, Pasquale Cilibrizzi, Sung-Yul L. Park, Jin Dong Song, Luca Sapienza

physics.opticscond-mat.mes-hallcond-mat.mtrl-sciphysics.app-phquant-phSubmitted Oct 1, 2026• Announced Oct 2, 2026
arXivHTMLPDF

Abstract

Epitaxial quantum dots (QDs) are widely recognised as one of the best quantum light sources, given their good stability, brightness, quantum efficiency and coherence. To reach such properties, QDs are protected from potentially detrimental surface states by a relatively thick capping layer, typically exceeding 50nm. This prevents the implementation of near-field effects, like plasmonic-based ones, that can dramatically increase the light-matter interaction, since the control of the spontaneous emission dynamics and directionality of the emission can only occur if the emitter is in close proximity (typically tens of nanometers or less) from the metallic structures. In this work, we report the growth and optical characterisation of InAs/GaAs QDs with GaAs capping layer thickness of 10nm, 20nm, and a more standard 95nm. Remarkably, we observe emission linewidths up to 5 times smaller than previously reported, with unperturbed excitonic lifetimes. These results demonstrate that the epitaxial QD's high optical quality can be maintained even when the emitters are at reduced distances from the surface, opening the path for the exploration of near-field light-matter interactions with coherent and stable emitters, suitable for quantum technology applications.

Related papers

Broadband telecom single-photon emissions from InAs/InP quantum dots grown by MOVPE droplet epitaxy

Shichen Zhang, Li Liu, Kai Guo +6 more

The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.

physics.opticsCross-listedarXiv:2511.16894•Nov 24, 2025

Strain-free, symmetrical, InGaAs quantum dots as single photon emitters in the telecomC-band

Rabbia Tahir, Paweł Wyborski, Artur Tuktamyshev +4 more

Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In$_{0.7}$Ga$_{0.3}$As/In$_{0.7}$Al$_{0.3}$As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In$_{0.7}$Al$_{0.3}$As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C$_{3v}$ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of $\approx$ 1.3--1.9 ns and linewidths as low as $\approx$ 300 $μ$eV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a $g^{(2)}(0)$ value of $0.141 \pm 0.027$

quant-pharXiv:2605.17332•May 19, 2026

Experimental techniques in optical quantum dot control

Vikas Remesh, Gregor Weihs

Solid-state quantum emitters, particularly epitaxial quantum dots (QDs), are one of the most promising platforms of quantum light sources to realize a compact quantum photonic architecture. Optimizing the performance of QDs for such purposes involves both source engineering and photonic control aspects. In this technical review, we examine a broad range of photonic techniques to control light–matter interaction in QDs, from an experimental viewpoint. Achieving full control over photonic degrees of freedom will transform quantum dots from laboratory to standardized building blocks in photonic quantum systems.

Applied Physics Reviews•Apr 21, 2026•1 citation

Coherently controlled quantum emitters in cavities

Andreas Müller, Edward B. Flagg, DENNIS GLENN DEPPE +2 more

Semiconductor nanostructures such as quantum dots (QDs) have offered unique opportunities to investigate quantum optical effects in solid-state systems. These include quantum interference, Rabi oscillations, as well as photon antibunching, and were previously observable only in isolated atoms or ions. In addition, QDs can be integrated into optical microcavities, making them attractive for applications in quantum information processing and high efficiency quantum light sources. Despite much progress towards these goals, one area that was little explored is coherent control of such solid-state quantum emitters in cavities. The main technical hurdle lies in overcoming the laser background scattering. By using a sample structure in which QDs are embedded in a planar Fabry-Perot cavity and by using an orthogonal excitation geometry, we have achieved a nearly complete elimination of laser background scattering. This in turn allows us to show resonantly controlled light emission of quantum dots in the cavity including (a) Rabi flopping using pulse control, (b) direct observation of Mollow triplets in the frequency domain, and (c) simultaneously measured first-order and second order photon-photon correlations.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 8, 2010•1 citation

Crystal-phase quantum dots in AlGaAs nanowires

Rohan Radhakrishnan, Rodion Reznik, Gilles Patriarche +6 more

Crystal-phase quantum dots (CPQDs)$\unicode{x2014}$quantum dots in nanowires defined by crystal structure rather than material composition$\unicode{x2014}$constitute the only platform capable of fabricating quantum-dot arrays with the ultimate precision of a single atomic layer. This intrinsic control yields perfectly aligned quantum dots with atomically sharp interfaces, providing a unique pathway toward scalable quantum-dot-based photonic quantum technologies. To date, CPQDs have been studied primarily in binary semiconductors, such as InP and GaAs, where their emission linewidths are typically in the meV range, thereby limiting their technological potential. Here, we report, for the first time, CPQDs in AlGaAs nanowires and show bright single-photon emission with linewidths as narrow as 61 $μeV$ and low background emission, demonstrating optical quality well beyond typical CPQDs. We attribute this performance to a type-I band alignment, as suggested by an exciton lifetime of 1 ns, significantly shorter than that typically observed in type-II CPQDs. Additionally, we observe an exciton fine-structure splitting and a Zeeman splitting, as commonly observed in standard type-I self-assembled quantum dots.

cond-mat.mes-hallCross-listedarXiv:2608.28353•Aug 31, 2026

Telecom Wavelength Quantum Devices

M. Felle

Semiconductor quantum dots (QDs) are well established as sub-Poissonian sources of entangled photon pairs. To improve the utility of a QD light source, it would be advantageous to extend their emission further into the near infrared, into the low absorption wavelength windows utilised in long-haul optical telecommunication. Initial experiments succeeded in interfering O-band (1260—1360 nm) photons from an InAs/GaAs QD with dissimilar photons from a laser, an important mechanism for quantum teleportation. Interference visibilities as high as 60 ± 6 % were recorded, surpassing the 50 % threshold imposed by classical electrodynamics. Later, polarisation-entanglement of a similar QD was observed, with pairs of telecom-wavelength photons from the radiative cascade of the biexciton state exhibiting fidelities of 92.0 ± 0.2 % to the Bell state. Subsequently, an O-band telecom-wavelength quantum relay was realised. Again using an InAs/GaAs QD device, this represents the first implementation of a sub-Poissonian telecom-wavelength quantum relay, to the best knowledge of the author. The relay proved capable of implementing the famous four-state BB84 protocol, with a mean teleportation fidelity as high as 94.5 ± 2.2 %, which would contribute 0.385 secure bits per teleported qubit. After characterisation by way of quantum process tomography, the performance of the relay was also evaluated to be capable of implementing a six-state QKD protocol. In an effort to further extend the emitted light from a QD into the telecom C-band (1530—1565 nm), alternative material systems were investigated. InAs QDs on a substrate of InP were shown to emit much more readily in the fibre-telecom O- and C-bands than their InAs/GaAs counterparts, largely due to the reduced lattice mismatch between the QD and substrate for InAs/InP (~3 %) compared to InAs/GaAs (~7 %). Additionally, to minimize the fine structure splitting (FSS) of the exciton level, which deteriorates the observed polarisation-entanglement, a new mode of dot growth was investigated. Known as droplet epitaxy (D-E), QDs grown in this mode showed a fourfold reduction in the FSS compared to dots grown in the Stranski-Krastanow mode. This improvement would allow observation of polarisation-entanglement in the telecom C-band. In subsequent work performed by colleagues at the Toshiba Cambridge Research Labs, these D-E QDs were embedded in a p-i-n doped optical cavity, processed with electrical contacts, and found to emit entangled pairs of photons under electrical excitation. The work of this thesis provides considerable technological advances to the field of entangled-light sources, that in the near future may allow for deterministic quantum repeaters operating at megahertz rates, and in the further future could facilitate the distribution of coherent multipartite states across a distributed quantum network.

•Dec 1, 2017•0 citations
Epitaxial quantum dots (QDs) are widely recognised as one of the best quantum light sources, given their good stability, brightness, quantum efficiency and coherence. To reach such properties, QDs are protected from potentially detrimental surface states by a relatively thick capping layer, typically exceeding 50nm. This prevents the implementation of near-field effects, like plasmonic-based ones, that can dramatically increase the light-matter interaction, since the control of the spontaneous emission dynamics and directionality of the emission can only occur if the emitter is in close proximity (typically tens of nanometers or less) from the metallic structures. In this work, we report the growth and optical characterisation of InAs/GaAs QDs with GaAs capping layer thickness of 10nm, 20nm, and a more standard 95nm. Remarkably, we observe emission linewidths up to 5 times smaller than previously reported, with unperturbed excitonic lifetimes. These results demonstrate that the epitaxial QD's high optical quality can be maintained even when the emitters are at reduced distances from the surface, opening the path for the exploration of near-field light-matter interactions with coherent and stable emitters, suitable for quantum technology applications.
The development of quantum materials for single-photon emission is crucial for the advancement of quantum information technology. Although significant advancement has been witnessed in recent years for single photon sources in near infrared band (λ~700-1000 nm), several challenges have yet to be addressed for ideal single photon emission at the telecommunication band. In this study, we present a droplet-epitaxy strategy for O-band to C-band single-photon source based semiconductor quantum dots (QDs) using metal-organic vapor-phase epitaxy (MOVPE). Via investigating the growth conditions of the epitaxial process, we have successfully synthesized InAs/InP QDs with narrow emission lines spanning a broad spectral range of λ~1200-1600 nm. The morphological and optical properties of the samples were characterized using atomic force microscopy and micro photoluminescence spectroscopy. The recorded single-photon purity of a plain QD structure reaches (g(2)(0) = 0.16), with a radiative recombination lifetime as short as 1.5 ns. This work provides a crucial platform for future research on integrated microcavity enhancement techniques and coupled QDs with other quantum photonics in the telecom bands, offering significant prospects for quantum network applications.
Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In0.7_{0.7}0.7​Ga0.3_{0.3}0.3​As/In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C3v_{3v}3v​ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of ≈\approx≈ 1.3--1.9 ns and linewidths as low as ≈\approx≈ 300 μμμeV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a g(2)(0)g^{(2)}(0)g(2)(0) value of 0.141±0.0270.141 \pm 0.0270.141±0.027
Solid-state quantum emitters, particularly epitaxial quantum dots (QDs), are one of the most promising platforms of quantum light sources to realize a compact quantum photonic architecture. Optimizing the performance of QDs for such purposes involves both source engineering and photonic control aspects. In this technical review, we examine a broad range of photonic techniques to control light–matter interaction in QDs, from an experimental viewpoint. Achieving full control over photonic degrees of freedom will transform quantum dots from laboratory to standardized building blocks in photonic quantum systems.
Semiconductor nanostructures such as quantum dots (QDs) have offered unique opportunities to investigate quantum optical effects in solid-state systems. These include quantum interference, Rabi oscillations, as well as photon antibunching, and were previously observable only in isolated atoms or ions. In addition, QDs can be integrated into optical microcavities, making them attractive for applications in quantum information processing and high efficiency quantum light sources. Despite much progress towards these goals, one area that was little explored is coherent control of such solid-state quantum emitters in cavities. The main technical hurdle lies in overcoming the laser background scattering. By using a sample structure in which QDs are embedded in a planar Fabry-Perot cavity and by using an orthogonal excitation geometry, we have achieved a nearly complete elimination of laser background scattering. This in turn allows us to show resonantly controlled light emission of quantum dots in the cavity including (a) Rabi flopping using pulse control, (b) direct observation of Mollow triplets in the frequency domain, and (c) simultaneously measured first-order and second order photon-photon correlations.
Crystal-phase quantum dots (CPQDs)$\unicode{x2014}$quantum dots in nanowires defined by crystal structure rather than material composition$\unicode{x2014}$constitute the only platform capable of fabricating quantum-dot arrays with the ultimate precision of a single atomic layer. This intrinsic control yields perfectly aligned quantum dots with atomically sharp interfaces, providing a unique pathway toward scalable quantum-dot-based photonic quantum technologies. To date, CPQDs have been studied primarily in binary semiconductors, such as InP and GaAs, where their emission linewidths are typically in the meV range, thereby limiting their technological potential. Here, we report, for the first time, CPQDs in AlGaAs nanowires and show bright single-photon emission with linewidths as narrow as 61 μeVμeVμeV and low background emission, demonstrating optical quality well beyond typical CPQDs. We attribute this performance to a type-I band alignment, as suggested by an exciton lifetime of 1 ns, significantly shorter than that typically observed in type-II CPQDs. Additionally, we observe an exciton fine-structure splitting and a Zeeman splitting, as commonly observed in standard type-I self-assembled quantum dots.
Semiconductor quantum dots (QDs) are well established as sub-Poissonian sources of entangled photon pairs. To improve the utility of a QD light source, it would be advantageous to extend their emission further into the near infrared, into the low absorption wavelength windows utilised in long-haul optical telecommunication. Initial experiments succeeded in interfering O-band (1260—1360 nm) photons from an InAs/GaAs QD with dissimilar photons from a laser, an important mechanism for quantum teleportation. Interference visibilities as high as 60 ± 6 % were recorded, surpassing the 50 % threshold imposed by classical electrodynamics. Later, polarisation-entanglement of a similar QD was observed, with pairs of telecom-wavelength photons from the radiative cascade of the biexciton state exhibiting fidelities of 92.0 ± 0.2 % to the Bell state. Subsequently, an O-band telecom-wavelength quantum relay was realised. Again using an InAs/GaAs QD device, this represents the first implementation of a sub-Poissonian telecom-wavelength quantum relay, to the best knowledge of the author. The relay proved capable of implementing the famous four-state BB84 protocol, with a mean teleportation fidelity as high as 94.5 ± 2.2 %, which would contribute 0.385 secure bits per teleported qubit. After characterisation by way of quantum process tomography, the performance of the relay was also evaluated to be capable of implementing a six-state QKD protocol. In an effort to further extend the emitted light from a QD into the telecom C-band (1530—1565 nm), alternative material systems were investigated. InAs QDs on a substrate of InP were shown to emit much more readily in the fibre-telecom O- and C-bands than their InAs/GaAs counterparts, largely due to the reduced lattice mismatch between the QD and substrate for InAs/InP (~3 %) compared to InAs/GaAs (~7 %). Additionally, to minimize the fine structure splitting (FSS) of the exciton level, which deteriorates the observed polarisation-entanglement, a new mode of dot growth was investigated. Known as droplet epitaxy (D-E), QDs grown in this mode showed a fourfold reduction in the FSS compared to dots grown in the Stranski-Krastanow mode. This improvement would allow observation of polarisation-entanglement in the telecom C-band. In subsequent work performed by colleagues at the Toshiba Cambridge Research Labs, these D-E QDs were embedded in a p-i-n doped optical cavity, processed with electrical contacts, and found to emit entangled pairs of photons under electrical excitation. The work of this thesis provides considerable technological advances to the field of entangled-light sources, that in the near future may allow for deterministic quantum repeaters operating at megahertz rates, and in the further future could facilitate the distribution of coherent multipartite states across a distributed quantum network.