As superconducting quantum processors scale toward hundreds of qubits, manual calibration becomes increasingly costly and difficult to sustain. Here we address two system-level factors governing automated calibration, namely, crosstalk induced by parallel operations and temporal drift of control parameters. On a 66-qubit superconducting processor, cross-entropy benchmarking shows that single-qubit calibration tolerates full-chip concurrency with minimal fidelity loss, whereas CZ calibration requires a minimum coupler-graph distance of four to avoid elevated control errors. Continuous monitoring of representative qubit and coupler parameters further yields quantitative refresh rules that assign refresh priority by error-budget consumption. These results turn two conventionally heuristic choices, the concurrency density of calibration tasks and the refresh priority of each control parameter, into measurable operating rules. Implemented within an automated calibration framework, the rules support a six-qubit Greenberger-Horne-Zeilinger state with a zero-noise-extrapolated fidelity of 89.64%, distance-dependent logical-error suppression in a single-cycle repetition-code benchmark, and a reduction of the mean single-qubit error from 0.023 to 0.011 on a 337-qubit processor, providing an experimentally grounded reference for the automated calibration and maintenance of current and future large-scale superconducting quantum systems.
As superconducting quantum processors scale toward hundreds of qubits, manual calibration becomes increasingly costly and difficult to sustain. Here we address two system-level factors governing automated calibration, namely, crosstalk induced by parallel operations and temporal drift of control parameters. On a 66-qubit superconducting processor, cross-entropy benchmarking shows that single-qubit calibration tolerates full-chip concurrency with minimal fidelity loss, whereas CZ calibration requires a minimum coupler-graph distance of four to avoid elevated control errors. Continuous monitoring of representative qubit and coupler parameters further yields quantitative refresh rules that assign refresh priority by error-budget consumption. These results turn two conventionally heuristic choices, the concurrency density of calibration tasks and the refresh priority of each control parameter, into measurable operating rules. Implemented within an automated calibration framework, the rules support a six-qubit Greenberger-Horne-Zeilinger state with a zero-noise-extrapolated fidelity of 89.64%, distance-dependent logical-error suppression in a single-cycle repetition-code benchmark, and a reduction of the mean single-qubit error from 0.023 to 0.011 on a 337-qubit processor, providing an experimentally grounded reference for the automated calibration and maintenance of current and future large-scale superconducting quantum systems.
High-Precision Calibration Workflow Achieves Above 99.9% CZ Gate Fidelity on a Scalable Superconducting Processor
High-fidelity universal two-qubit gates are critical for building fault-tolerant quantum computers. In scalable superconducting processors, shortened coherence times introduce more incoherent errors in gate operations. With a constrained error budget, there is reduced tolerance for coherent errors stemming from parameter deviations. In this work, we develop a closed-loop workflow to enhance the CZ gate calibration precision. Utilizing the echoed leakage error amplification (ELEA) and the repurposed context-aware fidelity estimation (CAFE) circuits, we suppress the population leakage to non-computational states, and, for the first time, demonstrate a CZ gate fidelity exceeding 99.9% on an 84-qubit processor, with coherent error suppressed to 0.007%. Meanwhile, we obtain a median fidelity of 99.25% among 72 CZ gates, demonstrating that the workflow can be generalized to the calibration of parallel CZ gates. Finally, we realize automated calibration and observe enhanced stability of the CZ gate throughout 9-hour comparative monitoring experiments. Our results, realized on a completely domestic platform, establish an efficient and automated route to quantum computation with superconducting quantum systems.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type ( XY ) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation and dynamical decoupling to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multiqubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further illustrate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-Z (cz) and iswap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.
Accurate and efficient implementation of parallel quantum gates is crucial for scalable quantum information processing. However, the unavoidable crosstalk between qubits in current noisy processors impedes the achievement of high gate fidelities and renders full Hilbert-space control optimization prohibitively difficult. Here, we overcome this challenge by reducing the full-system optimization to crosstalk-robust control over constant-sized subsystems, which dramatically reduces the computational cost. Our method effectively eliminates the leading-order gate operation deviations induced by crosstalk, thereby suppressing error rates. Within this framework, we construct analytical pulse solutions for parallel single-qubit gates and numerical pulses for parallel multi-qubit operations. We validate the proposed approach numerically across multiple platforms, including coupled nitrogen-vacancy centers, a nuclear-spin processor, and superconducting-qubit arrays with up to 200 qubits. As a result, the noise scaling is reduced from exponential to linear for parallel single-qubit gates, and an order-of-magnitude reduction is achieved for parallel multi-qubit gates. Moreover, our method does not require precise knowledge of crosstalk strengths and makes no assumption about the underlying qubit connectivity or lattice geometry, thereby establishing a scalable framework for parallel quantum control in large-scale quantum architectures.