Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.10700

Millisecond phonon lifetimes in piezoelectric nanomechanical resonators

Oliver A. Hitchcock, Matthew P. Maksymowych, Kaveh Pezeshki, Takuma Makihara, Erik Szakiel, Chou-Wei Kiang, Daniel Rugar, Amir H. Safavi-Naeini

cond-mat.mes-hallphysics.app-phquant-phSubmitted Oct 7, 2026• Announced Oct 9, 2026
arXivHTMLPDF

Abstract

Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding $4\times10^8$ ($f\cdot Q_i > 10^{18}$) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.

Comments
17 pages, 3 main figures, 8 appendix figures

Related papers

Release-free phononic crystal with strong microwave coupling

Joey Frey, Paul Burger, Trond Hjerpekjøn Haug +2 more

Phonons hold promise for storing and transferring quantum information, including in mechanically-mediated quantum interconnects between superconducting qubits and light. Phononic crystal cavities confine gigahertz sound to micron-scale volumes well matched to near-infrared light. So far, these devices have typically been suspended to suppress phononic radiation loss into the substrate, but suspension limits thermal anchoring leading to excess noise. Release-free phononic crystals have emerged as a way to address this challenge -- but had yet to be shown compatible with strong electromechanical interactions. Here, we demonstrate a release-free phononic crystal cavity strongly coupled to a high-impedance microwave resonator, with an electromechanical coupling rate $g_\mathrm{em}/(2π) \approx 30\,\text{MHz}$ that exceeds both the mechanical and microwave loss rates, leading to a cooperativity up to $\mathcal{C} \approx 180$ on resonance. In addition, our lithium niobate phononic crystals reach quality factors above $10^4$ at millikelvin temperature on both silicon and sapphire substrates. Our results establish release-free phononic crystals as compact, scalable interfaces between microwaves and gigahertz sound for emerging sensing, communication, and computing systems.

quant-pharXiv:2607.29666•Aug 3, 2026

Surface modification and coherence in lithium niobate SAW resonators

Rachel G. Gruenke, Oliver A. Hitchcock, E. Alex Wollack +5 more

Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.

arXiv:2306.14813•Scientific Reports•Mar 20, 2024•18 citations

Quartz phononic crystal resonators for hybrid acoustic quantum memories

Yang Hu, Angad Gupta, Jacob Repicky +2 more

Circuit quantum acoustodynamics systems have emerged as a promising platform for quantum information by coupling superconducting qubits to mechanical resonators, with their long-lived mechanical modes serving as quantum memories. We demonstrate suspended quartz phononic crystal resonators at 100 MHz with millisecond lifetimes at 8 K. With a contactless electrode geometry suppressing both two-level system losses and other electrode-induced energy dissipation, we evaluate the piezoelectric coupling rate between the mechanical modes and fluxonium qubits (resonant coupling) and transmon qubits (parametric coupling mediated by a Josephon-junction-based three-wave mixer). We further discuss multi-period defect geometries for enhancing these coupling rates.

arXiv:2509.07900•Sep 9, 2025•0 citations

Piezoelectric resonators in thin-film barium titanate from room temperature to millikelvin

Hao Tian, Shu-Yuan Chang, Nuha Akhtar +2 more

Ferroelectric materials, with their strong nonlinearities, underpin key technologies across radio-frequency (RF) signal processing, optical communications, and emerging quantum systems. Barium titanate (BTO) is a notable example, combining strong piezoelectric and electro-optic responses. While bulk BTO has been studied for decades, the piezoelectric properties of its recently available thin films, and their behavior at the millikelvin temperatures relevant to quantum hardware, remain largely unexplored. Here, we fabricate and characterize surface acoustic wave (SAW) resonators on thin-film BTO. The measured devices exhibit high electromechanical coupling (k2eff 0.14 at 5.2 GHz) and operate up to 7.8 GHz. From these measurements, combined with finite-element modeling of the multi-domain microstructure, we extract an effective piezoelectric coefficient d33eff of 53 pC/N, comparable to bulk BTO. Exploiting the intrinsic ferroelectricity, we further demonstrate low-voltage switching with a fast (100 ns) response, attractive for reconfigurable RF front-ends and parametric amplifiers. Extending these measurements to millikelvin temperatures, we find that the piezoelectric response persists, with d33eff 19 pC/N, pointing to the potential of BTO for piezoelectric coupling in superconducting quantum circuits. These results position thin-film BTO as a promising piezoelectric platform for both classical and quantum information technologies.

physics.app-phCross-listedarXiv:2606.18522•Jun 18, 2026

Piezoelectric loss of superconducting microwave resonators integrated with thin-film lithium niobate

Likai Yang, Yuntao Xu, Chunzhen Li +3 more

Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.

Physical Review Applied•Nov 13, 2023•4 citations

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•3 citations
Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding 4×1084\times10^84×108 (f⋅Qi>1018f\cdot Q_i > 10^{18}f⋅Qi​>1018) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.
Phonons hold promise for storing and transferring quantum information, including in mechanically-mediated quantum interconnects between superconducting qubits and light. Phononic crystal cavities confine gigahertz sound to micron-scale volumes well matched to near-infrared light. So far, these devices have typically been suspended to suppress phononic radiation loss into the substrate, but suspension limits thermal anchoring leading to excess noise. Release-free phononic crystals have emerged as a way to address this challenge -- but had yet to be shown compatible with strong electromechanical interactions. Here, we demonstrate a release-free phononic crystal cavity strongly coupled to a high-impedance microwave resonator, with an electromechanical coupling rate gem/(2π)≈30 MHzg_\mathrm{em}/(2π) \approx 30\,\text{MHz}gem​/(2π)≈30MHz that exceeds both the mechanical and microwave loss rates, leading to a cooperativity up to C≈180\mathcal{C} \approx 180C≈180 on resonance. In addition, our lithium niobate phononic crystals reach quality factors above 10410^4104 at millikelvin temperature on both silicon and sapphire substrates. Our results establish release-free phononic crystals as compact, scalable interfaces between microwaves and gigahertz sound for emerging sensing, communication, and computing systems.
Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.
Circuit quantum acoustodynamics systems have emerged as a promising platform for quantum information by coupling superconducting qubits to mechanical resonators, with their long-lived mechanical modes serving as quantum memories. We demonstrate suspended quartz phononic crystal resonators at 100 MHz with millisecond lifetimes at 8 K. With a contactless electrode geometry suppressing both two-level system losses and other electrode-induced energy dissipation, we evaluate the piezoelectric coupling rate between the mechanical modes and fluxonium qubits (resonant coupling) and transmon qubits (parametric coupling mediated by a Josephon-junction-based three-wave mixer). We further discuss multi-period defect geometries for enhancing these coupling rates.
Ferroelectric materials, with their strong nonlinearities, underpin key technologies across radio-frequency (RF) signal processing, optical communications, and emerging quantum systems. Barium titanate (BTO) is a notable example, combining strong piezoelectric and electro-optic responses. While bulk BTO has been studied for decades, the piezoelectric properties of its recently available thin films, and their behavior at the millikelvin temperatures relevant to quantum hardware, remain largely unexplored. Here, we fabricate and characterize surface acoustic wave (SAW) resonators on thin-film BTO. The measured devices exhibit high electromechanical coupling (k2eff 0.14 at 5.2 GHz) and operate up to 7.8 GHz. From these measurements, combined with finite-element modeling of the multi-domain microstructure, we extract an effective piezoelectric coefficient d33eff of 53 pC/N, comparable to bulk BTO. Exploiting the intrinsic ferroelectricity, we further demonstrate low-voltage switching with a fast (100 ns) response, attractive for reconfigurable RF front-ends and parametric amplifiers. Extending these measurements to millikelvin temperatures, we find that the piezoelectric response persists, with d33eff 19 pC/N, pointing to the potential of BTO for piezoelectric coupling in superconducting quantum circuits. These results position thin-film BTO as a promising piezoelectric platform for both classical and quantum information technologies.
Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.