Polarisation-resolved identification of spontaneous four-wave mixing processes in a multimode fused tapered fibre coupler

Abstract

Integrated quantum photonics benefits from photon-pair sources that generate photons directly in waveguides, where they can be efficiently collected, routed, and manipulated. Here, we investigate spontaneous four-wave mixing (SFWM) in a fused tapered-fibre microcoupler formed from two single-mode fibres, and report four contributions. First, we observe SFWM photon pairs in this multimode device: its elliptical central region supports three spatial mode profiles, each with two polarisations, giving six guided modes, and pumping it near 800 nm yields two photon pairs at 648/1048 nm and 660/1021 nm. Second, because several allowed SFWM processes produce similar wavelengths and wavelength alone does not identify their origin, we distinguish the processes by combining phase-matching calculations and selection rules with two independent polarisation measurements: the dependence of the coincidence rate on pump polarisation and polarisation tomography of the generated photons. Third, within the present geometrical model, we find that the 660/1021 nm pair is generated by co-polarised pump photons in a process occurring entirely within a single higher-order mode, whereas the 648/1048 nm pair is generated by orthogonally polarised pump photons in an intermodal process coupling a fundamental and a higher-order mode; the signal photons from the two processes have similar output polarisations, while the idler photons are nearly orthogonal. Fourth, extending the analysis beyond the measured operating point, we theoretically identify pairs of simultaneous SFWM processes driven by a common pump that could generate either polarisation entanglement or composite spatial-polarisation entanglement, depending on the pump wavelength. More generally, this work provides a practical strategy for identifying intermodal SFWM processes in multimode waveguides when spectral information alone is insufficient.