Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.25456

A low-cost modular FPGA-based control system for neutral atom tweezer arrays

Zeyu Ye, Varun Jorapur, F. Granato, Wanda Lindquist, David Peana, Isaac Both, Mouhamed Mbengue, Peter Mueller, Michael Bishof

Published Sep 21, 2026• 0 citations
arXivHTMLPDF

Abstract

We present the Quantum Atom Control Kit (QuACK), a low-cost FPGA-based control system that provides memory-efficient precise signal timing and low-delay measurement-based decision making for operating neutral atom optical tweezer array experiments. The system consists of an FPGA module connected to a host computer via USB 3.0 and multiple cable-connected modular daughterboards enabling a myriad of configurable I/O formats. In this work, digital input and output as well as analog outputs are demonstrated. Multiple experimental sequence segments can be encoded with 5 ns timing resolution. On-chip condition kernels enable fast branching between segments based on digital inputs, eliminating host intervention for time-critical decisions, while high-speed USB communication allows rapid sequence updates and host-level orchestration. We demonstrate initial system loading and rearranging neutral ytterbium-171 atoms in optical tweezers. The combination of high-resolution timing, on-chip logic, and distributed orchestration architecture makes this system well suited for atomic, molecular, and optical (AMO) experiments pursuing applications in quantum information science.

DOI
10.48550/arxiv.2609.25456

Related papers

Low-latency FPGA-based electronic control system for fast preparation of defect-free atom arrays

Ya-Dong Hu, Dong-Qi Ma, Tian-Yang Zhang +13 more

The scalability of neutral atom quantum computing demands integrated electronic control systems with low latency, modular architecture, and real-time feedback capability. Here, we present an FPGA-based electronic control system that eliminates the PC from the feedback loop, integrating photon counting, real-time decision-making, and waveform generation within a unified PXIe architecture. The system achieves a total feedback latency of $282\,\mathrm{μs}$ and is validated in practical experiments by assembling defect-free atom arrays from 24 stochastically loaded optical tweezers. A single-round rearrangement achieves a filling fraction of $\sim96\%$, while feedback-controlled iterative rearrangement over five rounds boosts the success probability for generating a 10-atom defect-free array from $65.7\%$ to $95.4\%$. This system establishes the electronic infrastructure necessary for mid-circuit measurement and real-time quantum error correction on neutral-atom platforms.

quant-pharXiv:2607.08687•Jul 10, 2026•0 citations

Efficient Assembly of a Defect-Free Quantum Register of 1024 Neutral-Atom Qubits

Lukas Sturm, Marcel Mittenbuehler, Tim Gollerthan +2 more

Low-entropy arrays of atomic quantum systems in optical tweezers offer unique prospects for fundamental research on few- and many-body systems as well as for extended applications in quantum technology. The significance of this approach relies on the achievable system size, its uniformity, and the rate of qubit allocation. We propel the neutral-atom quantum-technology platform by the rapid assembly of a regular two-dimensional quantum register of up to 1024 atomic qubits, enabled by a novel implementation of intensity-homogenized tweezer arrays and parallelized atom transport. Our highly efficient microoptical architecture modularizes intensity equalization and tweezer patterning in separate functional units, eliminating restrictions that arise for high-power, high-resolution, and large-scale light-field control within a single device. Arrays of precise grid structure, trap depth, and vibrational frequency with more than 3500 sites are demonstrated. Individual sites are interconnected by up to 50 parallelized transport tweezers with intensity and position control in real-time for swift qubit relocation. Multi-tweezer transport enables the operation of target patterns of up to 32 x 32 sites with sustained near-unity filling fraction. These results boost neutral-atom quantum information science above the kiloqubit level.

quant-pharXiv:2608.12021•Aug 13, 2026•0 citations

Highly-Parallel Atom-Detection Accelerator for Tweezer-Based Neutral Atom Quantum Computers

Jonas Winklmann, Yian Yu, Xiaorang Guo +2 more

Neutral atom quantum computers (NAQCs) are among the most promising computational platforms for quantum computing. Controlling and measuring individual atoms and their states, which often requires multiple imaging and image-analysis procedures, is typically the most time-consuming task during computation and contributes significantly to overall cycle times. To resolve this challenge, we propose a highly-parallel atom-detection accelerator for tweezer-based NAQCs. Our design builds on an existing state-reconstruction method and combines an algorithm-level optimization with a Field Programmable Gate Array (FPGA) implementation to maximize parallelism and reduce the run time of the image-analysis process. We identify and overcome several challenges for an FPGA implementation, such as introducing a prefetching mechanism to improve scalability and customizing bus transfers to support large bandwidths. Tested on a Xilinx UltraScale+ FPGA, our design can analyze a 256x256-pixel fluorescence image in just 115mus, achieving 34.9x and 6.3x speedups over the original and optimized CPU baseline, respectively. Moreover, our accelerator can maintain consistent resource utilization across various atom array sizes, contributing to the ongoing efforts toward scalable and fully integrated FPGA-based control systems for NAQCs.

quant-pharXiv:2604.00816•ACM/IEEE Design Automation Conference (DAC)•Apr 2, 2026•0 citations

A Control and Testing Framework for a Digital Micromirror Device in Neutral Atom Quantum Computing and Simulation Platforms

M. Mathews, Xiaodi Yin, Alexander Baumgärtner +2 more

Digital micromirror devices (DMDs) have seen recent popularity as spatial light modulators (SLMs) for arbitrary and dynamic potential generation in the manipulation of neutral atom systems for quantum simulation and quantum computing platforms. In enabling the use of a DMD for this purpose, its latency, frame rate, and micromirror movement dynamics must be well characterized for various settings. In this paper, we present our FPGA-based system to control the DMD and the optical setup developed for its verification. Image information and control parameters are generated and configured using a Python user interface and sent to the FPGA using a C++ wrapper and the Cypress FX2 USB protocol. The FPGA design enables the leveraging of the high frame rate capabilities of the DMD as well as ensuring deterministic operation by first storing this USB data on an external DDR memory and updating the micromirror states upon receiving an external trigger pulse. The DMD is imaged onto a scientific camera and two photodiodes as a means of verifying the system behavior and investigating the metrics of interest. Using this framework, the DLP7000 consisting of 768x1024 micromirrors has been shown to refresh at 22 kHz with 45.4 μs latency. Furthermore, a single block consisting of 48x1024 micromirrors is able to refresh at 140 kHz with 7.1 μs latency. The loading and clearing behavior of micromirrors has also been characterized for varying refresh rates.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 1, 2022•1 citation

An integrated atom array-nanophotonic chip platform with background-free imaging

Shankar G. Menon, Noah Glachman, Matteo Pompili +2 more

Arrays of neutral atoms trapped in optical tweezers have emerged as a leading platform for quantum information processing and quantum simulation due to their scalability, reconfigurable connectivity, and high-fidelity operations. Individual atoms are promising candidates for quantum networking due to their capability to emit indistinguishable photons that are entangled with their internal atomic states. Integrating atom arrays with photonic interfaces would enable distributed architectures in which nodes hosting many processing qubits could be efficiently linked together via the distribution of remote entanglement. However, many atom array techniques cease to work in close proximity to photonic interfaces, with atom detection via standard fluorescence imaging presenting a major challenge due to scattering from nearby photonic devices. Here, we demonstrate an architecture that combines atom arrays with up to 64 optical tweezers and a millimeter-scale photonic chip hosting more than 100 nanophotonic cavities. We achieve high-fidelity ( ~ 99.2%), background-free imaging in close proximity to nanofabricated cavities using a multichromatic excitation and detection scheme. The atoms can be imaged while trapped a few hundred nanometers above the dielectric surface, which we verify using Stark shift measurements of the modified trapping potential. Finally, we rearrange atoms into defect-free arrays and load them simultaneously onto the same or multiple devices.

arXiv:2311.02153•Nature Communications•Jul 22, 2024•35 citations

Scaling Neutral Atom Tweezer Arrays to 6,100 Qubits

Hannah J. Manetsch

Optical tweezer arrays of neutral atoms have been demonstrated in recent years to be a useful platform for quantum simulation, computation, and metrology. Realizing the full potential of these applications requires increasing qubit numbers while simultaneously maintaining high-fidelity control, which has proved a major challenge across quantum platforms. To date, quantum science experiments have typically been operated with at most hundreds of qubits. In this thesis, we review the relevant physics of the optical tweezer array architecture and present the technical advances involved in scaling the platform to 6,100 atomic qubits. In tandem with scalability, we demonstrate robust vacuum design, state-of-the-art coherence times, and high single-qubit gate fidelities. To capitalize on the intrinsic connectivity of the architecture at large scale, we investigate long-distance coherent atom transport and briefly describe progress towards two-qubit gate implementation. Finally, we discuss the prospects for scaling the optical tweezer array platform further by an order of magnitude.

•Jun 5, 2026•0 citations
We present the Quantum Atom Control Kit (QuACK), a low-cost FPGA-based control system that provides memory-efficient precise signal timing and low-delay measurement-based decision making for operating neutral atom optical tweezer array experiments. The system consists of an FPGA module connected to a host computer via USB 3.0 and multiple cable-connected modular daughterboards enabling a myriad of configurable I/O formats. In this work, digital input and output as well as analog outputs are demonstrated. Multiple experimental sequence segments can be encoded with 5 ns timing resolution. On-chip condition kernels enable fast branching between segments based on digital inputs, eliminating host intervention for time-critical decisions, while high-speed USB communication allows rapid sequence updates and host-level orchestration. We demonstrate initial system loading and rearranging neutral ytterbium-171 atoms in optical tweezers. The combination of high-resolution timing, on-chip logic, and distributed orchestration architecture makes this system well suited for atomic, molecular, and optical (AMO) experiments pursuing applications in quantum information science.
The scalability of neutral atom quantum computing demands integrated electronic control systems with low latency, modular architecture, and real-time feedback capability. Here, we present an FPGA-based electronic control system that eliminates the PC from the feedback loop, integrating photon counting, real-time decision-making, and waveform generation within a unified PXIe architecture. The system achieves a total feedback latency of 282 μs282\,\mathrm{μs}282μs and is validated in practical experiments by assembling defect-free atom arrays from 24 stochastically loaded optical tweezers. A single-round rearrangement achieves a filling fraction of ∼96%\sim96\%∼96%, while feedback-controlled iterative rearrangement over five rounds boosts the success probability for generating a 10-atom defect-free array from 65.7%65.7\%65.7% to 95.4%95.4\%95.4%. This system establishes the electronic infrastructure necessary for mid-circuit measurement and real-time quantum error correction on neutral-atom platforms.
Low-entropy arrays of atomic quantum systems in optical tweezers offer unique prospects for fundamental research on few- and many-body systems as well as for extended applications in quantum technology. The significance of this approach relies on the achievable system size, its uniformity, and the rate of qubit allocation. We propel the neutral-atom quantum-technology platform by the rapid assembly of a regular two-dimensional quantum register of up to 1024 atomic qubits, enabled by a novel implementation of intensity-homogenized tweezer arrays and parallelized atom transport. Our highly efficient microoptical architecture modularizes intensity equalization and tweezer patterning in separate functional units, eliminating restrictions that arise for high-power, high-resolution, and large-scale light-field control within a single device. Arrays of precise grid structure, trap depth, and vibrational frequency with more than 3500 sites are demonstrated. Individual sites are interconnected by up to 50 parallelized transport tweezers with intensity and position control in real-time for swift qubit relocation. Multi-tweezer transport enables the operation of target patterns of up to 32 x 32 sites with sustained near-unity filling fraction. These results boost neutral-atom quantum information science above the kiloqubit level.
Neutral atom quantum computers (NAQCs) are among the most promising computational platforms for quantum computing. Controlling and measuring individual atoms and their states, which often requires multiple imaging and image-analysis procedures, is typically the most time-consuming task during computation and contributes significantly to overall cycle times. To resolve this challenge, we propose a highly-parallel atom-detection accelerator for tweezer-based NAQCs. Our design builds on an existing state-reconstruction method and combines an algorithm-level optimization with a Field Programmable Gate Array (FPGA) implementation to maximize parallelism and reduce the run time of the image-analysis process. We identify and overcome several challenges for an FPGA implementation, such as introducing a prefetching mechanism to improve scalability and customizing bus transfers to support large bandwidths. Tested on a Xilinx UltraScale+ FPGA, our design can analyze a 256x256-pixel fluorescence image in just 115mus, achieving 34.9x and 6.3x speedups over the original and optimized CPU baseline, respectively. Moreover, our accelerator can maintain consistent resource utilization across various atom array sizes, contributing to the ongoing efforts toward scalable and fully integrated FPGA-based control systems for NAQCs.
Digital micromirror devices (DMDs) have seen recent popularity as spatial light modulators (SLMs) for arbitrary and dynamic potential generation in the manipulation of neutral atom systems for quantum simulation and quantum computing platforms. In enabling the use of a DMD for this purpose, its latency, frame rate, and micromirror movement dynamics must be well characterized for various settings. In this paper, we present our FPGA-based system to control the DMD and the optical setup developed for its verification. Image information and control parameters are generated and configured using a Python user interface and sent to the FPGA using a C++ wrapper and the Cypress FX2 USB protocol. The FPGA design enables the leveraging of the high frame rate capabilities of the DMD as well as ensuring deterministic operation by first storing this USB data on an external DDR memory and updating the micromirror states upon receiving an external trigger pulse. The DMD is imaged onto a scientific camera and two photodiodes as a means of verifying the system behavior and investigating the metrics of interest. Using this framework, the DLP7000 consisting of 768x1024 micromirrors has been shown to refresh at 22 kHz with 45.4 μs latency. Furthermore, a single block consisting of 48x1024 micromirrors is able to refresh at 140 kHz with 7.1 μs latency. The loading and clearing behavior of micromirrors has also been characterized for varying refresh rates.
Arrays of neutral atoms trapped in optical tweezers have emerged as a leading platform for quantum information processing and quantum simulation due to their scalability, reconfigurable connectivity, and high-fidelity operations. Individual atoms are promising candidates for quantum networking due to their capability to emit indistinguishable photons that are entangled with their internal atomic states. Integrating atom arrays with photonic interfaces would enable distributed architectures in which nodes hosting many processing qubits could be efficiently linked together via the distribution of remote entanglement. However, many atom array techniques cease to work in close proximity to photonic interfaces, with atom detection via standard fluorescence imaging presenting a major challenge due to scattering from nearby photonic devices. Here, we demonstrate an architecture that combines atom arrays with up to 64 optical tweezers and a millimeter-scale photonic chip hosting more than 100 nanophotonic cavities. We achieve high-fidelity ( ~ 99.2%), background-free imaging in close proximity to nanofabricated cavities using a multichromatic excitation and detection scheme. The atoms can be imaged while trapped a few hundred nanometers above the dielectric surface, which we verify using Stark shift measurements of the modified trapping potential. Finally, we rearrange atoms into defect-free arrays and load them simultaneously onto the same or multiple devices.
Optical tweezer arrays of neutral atoms have been demonstrated in recent years to be a useful platform for quantum simulation, computation, and metrology. Realizing the full potential of these applications requires increasing qubit numbers while simultaneously maintaining high-fidelity control, which has proved a major challenge across quantum platforms. To date, quantum science experiments have typically been operated with at most hundreds of qubits. In this thesis, we review the relevant physics of the optical tweezer array architecture and present the technical advances involved in scaling the platform to 6,100 atomic qubits. In tandem with scalability, we demonstrate robust vacuum design, state-of-the-art coherence times, and high single-qubit gate fidelities. To capitalize on the intrinsic connectivity of the architecture at large scale, we investigate long-distance coherent atom transport and briefly describe progress towards two-qubit gate implementation. Finally, we discuss the prospects for scaling the optical tweezer array platform further by an order of magnitude.