Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.07317

Planar metal-semiconductor Yagi-Uda type antennas for tunable narrow-linewidth quantum dot emitters

Ievgen Brytavskyi, Andreas Kitzmüller, Santanu Manna, Gabriel Undeutsch, Christian Weidinger, Thomas Oberleitner, Ailton J. Garcia,, Saimon Filipe Covre da Silva, Josef Resl, Raphael Joos, Robert Sittig, Michael Jetter, Simone L. Portalupi, Peter Michler, Armando Rastelli

physics.opticsquant-phSubmitted Sep 7, 2026• Announced Sep 8, 2026
arXivHTMLPDF

Abstract

Tunable photonic architectures that improve the extraction efficiency of light from embedded epitaxial quantum dots across a wide spectral range are key enablers for developing bright sources of single and indistinguishable photons. In this study, we experimentally demonstrate planar multilayer antenna structures consisting of epitaxially grown AlGaAs and InGaAs membranes containing quantum dots sandwiched between metallic Au (or Ag) reflector and director layers together with Al$_2$O$_3$ spacer layers. We show that the linewidths and fine-structure splitting of the neutral exciton emission remain comparable to those measured in the corresponding unprocessed samples, demonstrating that the fabrication process preserves the optical quality of the emitters. In addition to broadband operation, we demonstrate that the planar architecture is compatible with electrical tuning via integrated diode structures, and strain tuning using piezoelectric actuators. In spite of limitations related to optical losses in the ultrathin metallic layers, the demonstrated fabrication simplicity, scalability, and compatibility with tunable quantum emitters establish planar antennas as a promising platform for solid-state quantum photonic devices.

Related papers

Highly efficient light extraction and directional emission from diamond color centers using planar Yagi-Uda antennas

Hossam Galal, Assegid M. Flatae, S. Lagomarsino +8 more

Color centers in diamond represent a promising platform for developing solid-state single-photon sources and spin-photon interfaces as building blocks for photonics-based quantum technologies. However, although they exhibit a combination of features that make them so attractive, they also suffer from limited control in their emission properties, such as brightness, directionality, and polarization to cite a few. In this paper we present implementations and the experimental investigation of planar Yagi-Uda antennas in diamond, demonstrating highly efficient light extraction and directional emission from silicon-vacancy color centers created in thin diamond membranes.

arXiv:1905.03363•May 8, 2019•6 citations

Strain tunable quantum dot based non-classical photon sources

Jingzhong Yang, Michael Zopf, Fei Ding

Abstract Semiconductor quantum dots are leading candidates for the on-demand generation of single photons and entangled photon pairs. High photon quality and indistinguishability of photons from different sources are critical for quantum information applications. The inability to grow perfectly identical quantum dots with ideal optical properties necessitates the application of post-growth tuning techniques via e.g. temperature, electric, magnetic or strain fields. In this review, we summarize the state-of-the-art and highlight the advantages of strain tunable non-classical photon sources based on epitaxial quantum dots. Using piezoelectric crystals like PMN-PT, the wavelength of single photons and entangled photon pairs emitted by InGaAs/GaAs quantum dots can be tuned reversibly. Combining with quantum light-emitting diodes simultaneously allows for electrical triggering and the tuning of wavelength or exciton fine structure. Emission from light hole exciton can be tuned, and quantum dot containing nanostructure such as nanowires have been piezo-integrated. To ensure the indistinguishability of photons from distant emitters, the wavelength drift caused by piezo creep can be compensated by frequency feedback, which is verified by two-photon interference with photons from two stabilized sources. Therefore, strain tuning proves to be a flexible and reliable tool for the development of scalable quantum dots-based non-classical photon sources.

Journal of Semiconductors•Jan 1, 2020•9 citations

Enhanced spectral range of strain-induced tuning of quantum dots in circular Bragg grating cavities

Ivan Gamov, Matthias Sauter, Samuel Huber +5 more

Tunable sources of entangled and single photons are essential for implementing entanglement-based quantum information protocols, as quantum teleportation and entanglement swapping depend on photon indistinguishability. Tunable devices are fabricated from indium arsenide (InAs) quantum dots (QDs) embedded in gallium arsenide (GaAs) nanomembranes placed on monolithic piezoelectric substrates. Circular Bragg grating (CBG) resonators enhance emission brightness and exploit the Purcell effect; however, the inclusion of CBGs reduces strain-mediated tunability compared to planar nanomembranes. A simple and effective solution is introduced: filling the CBG trenches with a stiff dielectric (aluminum oxide) via atomic layer deposition (ALD) restores up to 95% of the tunability of planar structures. Finite element analysis (FEA) confirms that the tunability loss originates from bending in the device layers due to strain relief in the CBG geometry. Lowering the stiffness of intermediate layers between the QDs and the piezoelectric actuator, such as in bonding or reflector layers, further increases strain losses in uncoated CBGs. Coated devices maintain 98-99% strain-tuning efficiency across all simulated underlayer stiffnesses. The results demonstrate that advantageous optical cavity properties can be effectively combined with piezoelectric strain tuning, enabling scalable, bright, and tunable quantum light sources.

cond-mat.mtrl-sciCross-listedarXiv:2511.09155•Nov 13, 2025

AlGaAs nanowires as a universal platform for GaAs, InGaAs, and InAs quantum dots

Rohan Radhakrishnan, Rodion Reznik, Gilles Patriarche +5 more

Optical quantum dots (QDs) are central to photonic quantum technologies, with fabrication approaches tailored to different spectral ranges. A key challenge, however, is the realization of a unified platform$\unicode{x2014}$a single growth method combined with a host material offering a designable architecture$\unicode{x2014}$enabling wavelength tunability across the full emission range and co-integration of multiple quantum dots. Here, we introduce AlGaAs nanowires as a universal host for GaAs, InGaAs, and InAs QDs. Building on our previous demonstration of high-quality GaAs QDs, we realize InGaAs QDs with tunable emission by varying the growth duration from 2 to 5 s, achieving emission at 780 and 920 nm. We further showcase the platform's versatility for multi-quantum-dot devices by co-integrating two InGaAs QDs, as well as GaAs and InGaAs QDs within a single nanowire. Finally, we initiate a first step toward pure InAs QDs by growing a pristine InAs segment on AlGaAs nanowires, demonstrating material compatibility.

physics.opticsCross-listedarXiv:2608.24495•Aug 26, 2026

Single- and entangled-photon emission from strain tunable quantum dots devices

Jiaxiang Zhang

On demand single-photon and entangled-photon sources are key building-blocks for many proposed photonic quantum technologies. For practical device applications, epitaxially grown quantum dots (QDs) are of increasing importance due to their bright photon emission with sharp line width. Particularly, they are solid-state systems and can be easily embedded within a light-emitting diode (LED) to achieve electrically driven sources. Therefore, one would expect a full-fledged optoelectronic quantum network that is running on macroscopically separated, QD-based single- and entangled-photon devices. An all-electrically operated wavelength-tunable on demand single-photon source (SPS) is demonstrated first. The device consists of a LED in the form of self-assembled InGaAs QDs containing nanomembrane integrated onto a piezoelectric crystal. Triggered single photons are generated via injection of ultra-short electrical pulses into the diode, while their energy can be precisely tuned over a broad range of about 4.8 meV by varying the voltage applied to the piezoelectric crystal. High speed operation of this single-photon emitting diode up to 0.8 GHz is demonstrated. In the second part of this thesis, a fast strain-tunable entangled-light-emitting diode (ELED) is demonstrated. It has been shown that the fine structure splitting of the exciton can be effectively overcome by employing a specific anisotropic strain field. By injecting ultra-fast electrical pulses to the diode, electrically triggered entangled-photon emission with high degree of entanglement is successfully realized. A statistical investigation reveals that more than 30% of the QDs in the strain-tunable quantum LED emit polarization-entangled photon-pairs with entanglement-fidelities up to f+ = 0.83(5). Driven at the highest operation speed ever reported so far (400 MHz), the strain-tunable quantum LED emerges as unique devices for high-data rate entangled-photon applications. In the end of this thesis, on demand and wavelength-tunable LH single-photon emission from strain engineered GaAs QDs is demonstrated. Fourier-transform spectroscopy is performed, from which the coherence time of the LH single-photon emission is studied. It is envisioned that this new type of LH exciton-based SPS can be applied to realize an all-semiconductor based quantum interface in the foreseeable distributed quantum networks.

•Apr 30, 2015•0 citations

Strain-free, symmetrical, InGaAs quantum dots as single photon emitters in the telecomC-band

Rabbia Tahir, Paweł Wyborski, Artur Tuktamyshev +4 more

Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In$_{0.7}$Ga$_{0.3}$As/In$_{0.7}$Al$_{0.3}$As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In$_{0.7}$Al$_{0.3}$As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C$_{3v}$ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of $\approx$ 1.3--1.9 ns and linewidths as low as $\approx$ 300 $μ$eV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a $g^{(2)}(0)$ value of $0.141 \pm 0.027$

quant-pharXiv:2605.17332•May 19, 2026
Tunable photonic architectures that improve the extraction efficiency of light from embedded epitaxial quantum dots across a wide spectral range are key enablers for developing bright sources of single and indistinguishable photons. In this study, we experimentally demonstrate planar multilayer antenna structures consisting of epitaxially grown AlGaAs and InGaAs membranes containing quantum dots sandwiched between metallic Au (or Ag) reflector and director layers together with Al2_22​O3_33​ spacer layers. We show that the linewidths and fine-structure splitting of the neutral exciton emission remain comparable to those measured in the corresponding unprocessed samples, demonstrating that the fabrication process preserves the optical quality of the emitters. In addition to broadband operation, we demonstrate that the planar architecture is compatible with electrical tuning via integrated diode structures, and strain tuning using piezoelectric actuators. In spite of limitations related to optical losses in the ultrathin metallic layers, the demonstrated fabrication simplicity, scalability, and compatibility with tunable quantum emitters establish planar antennas as a promising platform for solid-state quantum photonic devices.
Color centers in diamond represent a promising platform for developing solid-state single-photon sources and spin-photon interfaces as building blocks for photonics-based quantum technologies. However, although they exhibit a combination of features that make them so attractive, they also suffer from limited control in their emission properties, such as brightness, directionality, and polarization to cite a few. In this paper we present implementations and the experimental investigation of planar Yagi-Uda antennas in diamond, demonstrating highly efficient light extraction and directional emission from silicon-vacancy color centers created in thin diamond membranes.
Abstract Semiconductor quantum dots are leading candidates for the on-demand generation of single photons and entangled photon pairs. High photon quality and indistinguishability of photons from different sources are critical for quantum information applications. The inability to grow perfectly identical quantum dots with ideal optical properties necessitates the application of post-growth tuning techniques via e.g. temperature, electric, magnetic or strain fields. In this review, we summarize the state-of-the-art and highlight the advantages of strain tunable non-classical photon sources based on epitaxial quantum dots. Using piezoelectric crystals like PMN-PT, the wavelength of single photons and entangled photon pairs emitted by InGaAs/GaAs quantum dots can be tuned reversibly. Combining with quantum light-emitting diodes simultaneously allows for electrical triggering and the tuning of wavelength or exciton fine structure. Emission from light hole exciton can be tuned, and quantum dot containing nanostructure such as nanowires have been piezo-integrated. To ensure the indistinguishability of photons from distant emitters, the wavelength drift caused by piezo creep can be compensated by frequency feedback, which is verified by two-photon interference with photons from two stabilized sources. Therefore, strain tuning proves to be a flexible and reliable tool for the development of scalable quantum dots-based non-classical photon sources.
Tunable sources of entangled and single photons are essential for implementing entanglement-based quantum information protocols, as quantum teleportation and entanglement swapping depend on photon indistinguishability. Tunable devices are fabricated from indium arsenide (InAs) quantum dots (QDs) embedded in gallium arsenide (GaAs) nanomembranes placed on monolithic piezoelectric substrates. Circular Bragg grating (CBG) resonators enhance emission brightness and exploit the Purcell effect; however, the inclusion of CBGs reduces strain-mediated tunability compared to planar nanomembranes. A simple and effective solution is introduced: filling the CBG trenches with a stiff dielectric (aluminum oxide) via atomic layer deposition (ALD) restores up to 95% of the tunability of planar structures. Finite element analysis (FEA) confirms that the tunability loss originates from bending in the device layers due to strain relief in the CBG geometry. Lowering the stiffness of intermediate layers between the QDs and the piezoelectric actuator, such as in bonding or reflector layers, further increases strain losses in uncoated CBGs. Coated devices maintain 98-99% strain-tuning efficiency across all simulated underlayer stiffnesses. The results demonstrate that advantageous optical cavity properties can be effectively combined with piezoelectric strain tuning, enabling scalable, bright, and tunable quantum light sources.
Optical quantum dots (QDs) are central to photonic quantum technologies, with fabrication approaches tailored to different spectral ranges. A key challenge, however, is the realization of a unified platform$\unicode{x2014}$a single growth method combined with a host material offering a designable architecture$\unicode{x2014}$enabling wavelength tunability across the full emission range and co-integration of multiple quantum dots. Here, we introduce AlGaAs nanowires as a universal host for GaAs, InGaAs, and InAs QDs. Building on our previous demonstration of high-quality GaAs QDs, we realize InGaAs QDs with tunable emission by varying the growth duration from 2 to 5 s, achieving emission at 780 and 920 nm. We further showcase the platform's versatility for multi-quantum-dot devices by co-integrating two InGaAs QDs, as well as GaAs and InGaAs QDs within a single nanowire. Finally, we initiate a first step toward pure InAs QDs by growing a pristine InAs segment on AlGaAs nanowires, demonstrating material compatibility.
On demand single-photon and entangled-photon sources are key building-blocks for many proposed photonic quantum technologies. For practical device applications, epitaxially grown quantum dots (QDs) are of increasing importance due to their bright photon emission with sharp line width. Particularly, they are solid-state systems and can be easily embedded within a light-emitting diode (LED) to achieve electrically driven sources. Therefore, one would expect a full-fledged optoelectronic quantum network that is running on macroscopically separated, QD-based single- and entangled-photon devices. An all-electrically operated wavelength-tunable on demand single-photon source (SPS) is demonstrated first. The device consists of a LED in the form of self-assembled InGaAs QDs containing nanomembrane integrated onto a piezoelectric crystal. Triggered single photons are generated via injection of ultra-short electrical pulses into the diode, while their energy can be precisely tuned over a broad range of about 4.8 meV by varying the voltage applied to the piezoelectric crystal. High speed operation of this single-photon emitting diode up to 0.8 GHz is demonstrated. In the second part of this thesis, a fast strain-tunable entangled-light-emitting diode (ELED) is demonstrated. It has been shown that the fine structure splitting of the exciton can be effectively overcome by employing a specific anisotropic strain field. By injecting ultra-fast electrical pulses to the diode, electrically triggered entangled-photon emission with high degree of entanglement is successfully realized. A statistical investigation reveals that more than 30% of the QDs in the strain-tunable quantum LED emit polarization-entangled photon-pairs with entanglement-fidelities up to f+ = 0.83(5). Driven at the highest operation speed ever reported so far (400 MHz), the strain-tunable quantum LED emerges as unique devices for high-data rate entangled-photon applications. In the end of this thesis, on demand and wavelength-tunable LH single-photon emission from strain engineered GaAs QDs is demonstrated. Fourier-transform spectroscopy is performed, from which the coherence time of the LH single-photon emission is studied. It is envisioned that this new type of LH exciton-based SPS can be applied to realize an all-semiconductor based quantum interface in the foreseeable distributed quantum networks.
Non-classical photon sources made of semiconductor quantum dots (QDs) emitting in the telecommunication C-band are crucial components for low-loss, long-distance photonic quantum communication networks. Here we designed and fabricated strain--free In0.7_{0.7}0.7​Ga0.3_{0.3}0.3​As/In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As QDs grown on GaAs(111)A substrates working as single-photon emitters in the 1550 nm window. The QDs were grown via local droplet etching method in a molecular beam epitaxy environment, employing a thin In0.7_{0.7}0.7​Al0.3_{0.3}0.3​As metamorphic buffer layer with the same lattice constant of the QD material, thus allowing for a completely strain--free self-assembly of the QDs. The QDs exhibit a C3v_{3v}3v​ symmetry with a ground state emission in the 1400--1600 nm range. The exciton lifetimes of ≈\approx≈ 1.3--1.9 ns and linewidths as low as ≈\approx≈ 300 μμμeV show the good quality of the fabricated QDs. Second-order autocorrelation measurements under pulsed excitation confirmed the single-photon purity of the emitters, yielding a g(2)(0)g^{(2)}(0)g(2)(0) value of 0.141±0.0270.141 \pm 0.0270.141±0.027