The characterization of excited-state structure in semiconductor quantum dot (QD) devices is an important component of tuning them for spin-qubit operation. We present Spectroscopy With Intelligent Feature Tracking (SWIFT), a framework that combines machine-learning (ML)-assisted feature identification with physics-informed geometric processing to extract energy-level splittings from pulsed-gate spectroscopy data. SWIFT isolates the relevant spectral features and exploits their characteristic geometry to reduce the two-dimensional spectroscopy analysis to a one-dimensional peak-detection problem. It further combines an ensemble-based confidence metric with sequential accumulation of rapid, low-SNR scans, allowing the inferred spectrum to be reevaluated as experimental evidence accumulates. Using Si/SiGe QD devices, we demonstrate SWIFT both offline and in real time, including automated tracking of QD excited states and lead resonances. Benchmarking on 255 manually labeled scans shows that SWIFT reduces the median splitting error to 0.05 mV from 0.11 mV for a classical baseline, with the largest improvement on lower-quality measurements. These results provide a path toward incorporating excited-state spectroscopy into autonomous QD characterization, tuning, and optimization, which will be essential in large-scale quantum dot devices.
The characterization of excited-state structure in semiconductor quantum dot (QD) devices is an important component of tuning them for spin-qubit operation. We present Spectroscopy With Intelligent Feature Tracking (SWIFT), a framework that combines machine-learning (ML)-assisted feature identification with physics-informed geometric processing to extract energy-level splittings from pulsed-gate spectroscopy data. SWIFT isolates the relevant spectral features and exploits their characteristic geometry to reduce the two-dimensional spectroscopy analysis to a one-dimensional peak-detection problem. It further combines an ensemble-based confidence metric with sequential accumulation of rapid, low-SNR scans, allowing the inferred spectrum to be reevaluated as experimental evidence accumulates. Using Si/SiGe QD devices, we demonstrate SWIFT both offline and in real time, including automated tracking of QD excited states and lead resonances. Benchmarking on 255 manually labeled scans shows that SWIFT reduces the median splitting error to 0.05 mV from 0.11 mV for a classical baseline, with the largest improvement on lower-quality measurements. These results provide a path toward incorporating excited-state spectroscopy into autonomous QD characterization, tuning, and optimization, which will be essential in large-scale quantum dot devices.
As quantum dot (QD)-based spin qubits advance toward larger, more complex device architectures, rapid, automated device characterization and data analysis tools become critical. The orientation and spacing of transition lines in a charge stability diagram (CSD) contain a fingerprint of a QD device's capacitive environment, making these measurements useful tools for device characterization. However, manually interpreting these features is time-consuming, error-prone, and impractical at scale. Here, we present an automated protocol for extracting underlying capacitive properties from CSDs. Our method integrates machine learning, image processing, and object detection to identify and track charge transitions across large datasets without manual labeling. We demonstrate this method using experimentally measured data from a strained-germanium single-quantum-well (planar) and a strained-germanium double-quantum-well (bilayer) QD device. Unlike for planar QD devices, CSDs in bilayer germanium heterostructure exhibit a larger set of transitions, including interlayer tunneling and distinct loading lines for the vertically stacked QDs, making them a powerful testbed for automation methods. By analyzing the properties of many CSDs, we can statistically estimate physically relevant quantities, like relative lever arms and capacitive couplings. Thus, our protocol enables rapid extraction of useful, nontrivial information about QD devices.
Abstract Recent progress in building large-scale quantum devices for exploring quantum computing and simulation has relied upon effective tools for achieving and maintaining good experimental parameters, i.e., tuning up devices. In many cases, including quantum dot-based architectures, the parameter space grows substantially with the number of qubits, and may become a limit to scalability. Fortunately, machine learning techniques for pattern recognition and image classification, using so-called deep neural networks, have shown surprising successes for computer-aided understanding of complex systems. We propose a new paradigm for fully automated experimental initialization through a closed-loop system relying on machine learning and optimization techniques. We use deep convolutional neural networks to characterize states and charge configurations of semiconductor quantum dot arrays when only measurements of a current−voltage characteristic of transport are available. For simplicity, we model a semiconductor nanowire connected to leads and capacitively coupled to depletion gates using the Thomas−Fermi approximation and Coulomb blockade physics. We then generate labeled training data for the neural networks, and find at least 90 % accuracy for charge and state identification for single and double dots. Using these characterization networks, we can then optimize the parameter space to achieve a desired configuration of the array, a technique we call “auto-tuning”. Finally, we show how such techniques can be implemented in an experimental setting by applying our approach to an experimental dataset, and outline further problems in this domain, from using charge sensing data to extensions to full one- and two-dimensional arrays, that can be tackled with machine learning.
Abstract The rapid development of quantum dot (QD) devices for quantum computing has necessitated more efficient and automated methods for device characterization and tuning. Many of the measurements acquired during the tuning process come in the form of images that need to be properly analyzed to guide the subsequent tuning steps. By design, features present in such images capture certain behaviors or states of the measured QD devices. When considered carefully, such features can aid the control and calibration of QD devices. An important example of such images are so-called triangle plots , which visually represent current flow and reveal characteristics important for QD device calibration. While image-based classification tools, such as convolutional neural networks (CNNs), can be used to verify whether a given measurement is good and thus warrants the initiation of the next phase of tuning, they do not provide any insights into how the device should be adjusted in the case of bad images. This is because CNNs sacrifice prediction and model intelligibility for high accuracy. To ameliorate this trade-off, a recent study introduced an image vectorization approach that relies on the Gabor wavelet transform (Schug et al 2024 Proc. XAI4Sci: Explainable Machine Learning for Sciences Workshop (AAAI 2024) (Vancouver, Canada) pp 1–6). Here we propose an alternative vectorization method that involves mathematical modeling of synthetic triangles to mimic the experimental data. Using explainable boosting machines, we show that this new method offers superior explainability of model prediction without sacrificing accuracy. This work demonstrates the feasibility and advantages of applying explainable machine learning techniques to the analysis of QD measurements, paving the way for further advances in automated and transparent QD device tuning.
The current autotuning approaches for quantum dot (QD) devices, while showing some success, lack an assessment of data reliability. This leads to unexpected failures when noisy or otherwise low-quality data is processed by an autonomous system. In this work, we propose a framework for robust autotuning of QD devices that combines a machine learning (ML) state classifier with a data quality control module. The data quality control module acts as a ``gatekeeper'' system, ensuring that only reliable data are processed by the state classifier. Lower data quality results in either device recalibration or termination. To train both ML systems, we enhance the QD simulation by incorporating synthetic noise typical of QD experiments. We confirm that the inclusion of synthetic noise in the training of the state classifier significantly improves the performance, resulting in an accuracy of $95.0(9)\mathrm{%}$ when tested on experimental data. We then validate the functionality of the data quality control module by showing that the state classifier performance deteriorates with decreasing data quality, as expected. Our results establish a robust and flexible ML framework for autonomous tuning of noisy QD devices.
Quantum dots (QDs) defined with electrostatic gates are a leading platform for a scalable quantum computing implementation. However, with increasing numbers of qubits, the complexity of the control parameter space also grows. Traditional measurement techniques, relying on complete or near-complete exploration via two-parameter scans (images) of the device response, quickly become impractical with increasing numbers of gates. Here we propose to circumvent this challenge by introducing a measurement technique relying on one-dimensional projections of the device response in the multidimensional parameter space. Dubbed the "ray-based classification (RBC) framework," we use this machine learning approach to implement a classifier for QD states, enabling automated recognition of qubit-relevant parameter regimes. We show that RBC surpasses the 82% accuracy benchmark from the experimental implementation of image-based classification techniques from prior work, while reducing the number of measurement points needed by up to 70%. The reduction in measurement cost is a significant gain for time-intensive QD measurements and is a step forward toward the scalability of these devices. We also discuss how the RBC-based optimizer, which tunes the device to a multiqubit regime, performs when tuning in the two-dimensional and three-dimensional parameter spaces defined by plunger and barrier gates that control the QDs. This work provides experimental validation of both efficient state identification and optimization with machine learning techniques for non-traditional measurements in quantum systems with high-dimensional parameter spaces and time-intensive measurements.
The performance and scalability of semiconductor quantum-dot (QD) qubits are limited by electrostatic drift and charge noise that shift operating points and destabilize qubit parameters. As systems expand to large one- and two-dimensional arrays, manual recalibration becomes impractical, creating a need for autonomous stabilization frameworks. Here, we introduce a method that uses the full network of charge-transition lines in repeatedly acquired double-quantum-dot charge stability diagrams (CSDs) as a multidimensional probe of the local electrostatic environment. By accurately tracking the motion of selected transitions in time, we detect voltage drifts, identify abrupt charge reconfigurations, and apply compensating updates to maintain stable operating conditions. We demonstrate our approach on a 10-QD device, showing robust stabilization and real-time diagnostic access to dot-specific noise processes. The high acquisition rate of radio-frequency reflectometry CSD measurements also enables time-domain noise spectroscopy, allowing the extraction of noise power spectral densities, the identification of two-level fluctuators, and the analysis of spatial noise correlations across the array. From our analysis, we find that the background noise at 100~μ\si{\hertz} is dominated by drift with a power law of 1/f2, accompanied by a few dominant two-level fluctuators and an average linear correlation length of (188±38)~\si{\nano\meter} in the device. These capabilities form the basis of a scalable, autonomous calibration and characterization module for QD-based quantum processors, providing essential feedback for long-duration, high-fidelity qubit operations.