Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.15230

High-Q superconducting microwave resonators using MBE titanium nitride

Anand Ithepalli, Hüseyin Ozan Ҫirkinoğlu, Eegene Clara Chung, Xiangqin Wang, Amit Rohan Rajapurohita, K. Park, Celesta S. Chang, Peter L. McMahon, Huili Grace Xing, David Muller, Valla Fatemi, Debdeep Jena

Published Jul 16, 2026• 0 citations
arXivHTMLPDF

Abstract

Using molecular beam epitaxy, we have realized thin films of titanium nitride (TiN) on c-plane sapphire that exhibit the lowest observed full-width at half maximum X-ray rocking curve width of 18 arcsec. Though the (111) oriented TiN exhibits an abrupt and crystalline interface with sapphire, for the first time we observe sub-surface defects in the sapphire substrate, which nucleate structural defects in the epitaxial TiN layer. Using quarter-wavelength coplanar waveguide (CPW) resonators in a 3 \textmu m/6 \textmu m/3 \textmu m gap/strip/gap lines in a hanger geometry, we find the internal quality factor of the TiN resonators to be $>10^{6}$ in the single-photon $\langle n \rangle \sim 1$ limit at 5.8 GHz and 10 mK, rising to $>20 \times 10^{6}$ at $\langle n \rangle \sim 10^{6}$. The results are of high interest for applications of superconducting TiN in several areas, and provide a path towards epitaxial Josephson junctions with crystalline barriers in the future for high coherence qubits.

DOI
10.48550/arxiv.2607.15230

Related papers

Low-loss superconducting titanium nitride grown using plasma-assisted molecular beam epitaxy

Christopher J. K. Richardson, Ashish Alexander, Christopher Weddle +2 more

Titanium nitride (TiN) is a known superconducting material that is attractive for use as passive components in superconducting circuits for both conventional and quantum information devices. In contrast to conventional synthesis techniques, here, plasma-assisted molecular beam epitaxy is reported to produce high-quality TiN on bare silicon wafers. Using a rf-plasma source to crack the nitrogen molecules and a conventional high-temperature effusion cell for titanium, TiN growth is completed under nitrogen-rich conditions. The growth and nucleation is monitored in situ, while the structure and composition are characterized using x-ray diffraction, atomic force microscopy, x-ray photoelectron spectroscopy, secondary ion mass spectroscopy, and scanning transmission electron microscopy. The stoichiometric TiN (111) films sit on an amorphous nitride layer with low impurity concentrations. The films superconduct with Tc=5.4 K, and coplanar waveguide resonators are fabricated with a small center width of 6 μm that demonstrate single-photon quality factors approaching 1M and high-power quality factors over 5M without observing saturation.

Journal of Applied Physics•Jun 18, 2020•38 citations

Optimizing CMOS-compatible, superconducting titanium nitride resonators: Deposition conditions and structuring processes

Simon J. K. Lang, Alexandra Schewski, Ignaz Eisele +10 more

We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically investigate how deposition conditions, dry-etch power and in-situ resist strip temperature affect morphology, superconducting properties and dielectric losses. By tuning reactive sputtering conditions, three distinct preferred out-of-plane crystal orientations - (111), (200), and a mix of both are achieved. Our results demonstrate that all films exhibit similar minimal two-level system (TLS) losses, with TiN111 exhibiting the lowest median TLS losses $\tildeδ_\mathrm{TLS}$, and greater robustness against reoxidation. The applied structuring process, in contrast, has a far greater influence on the TLS loss than the crystal orientation of the TiN film and, consequently, the intrinsic material properties of the superconducting layer. The lowest TLS losses for all TiN depositions were achieved with a low power etch and low temperature resist strip. An additional buffered oxide etch (BOE) treatment could remove high-loss interfacial oxides at the metal-air (MA) and substrate-air (SA) interface and recover the etch-induced TLS losses. Consequently, TiN resonators exhibiting $\tildeδ_\mathrm{TLS}$ values as low as $9.67 \times 10^{-7}$ were realized. The corresponding median low-power loss, $\tildeδ_\mathrm{LP}$, amounts to $11.04 \times 10^{-7}$, which translates to an internal quality factor approaching one million. These findings highlight the critical role of process induced oxide formation at the MA and SA interfaces in limiting the performance of TiN resonators and provide a scalable, low-loss process compatible with industry-grade 200\,mm CMOS qubit fabrication workflows.

quant-pharXiv:2603.00441•Applied Physics Reviews•Mar 3, 2026•0 citations

Growth of titanium-nitride thin films for low-loss superconducting quantum circuits

Gustaf Olson

This is a study of the growth of titanium-nitride (TiN) by plasma assisted molecular beam epitaxy (MBE) for applications in low loss quantum circuits. Titanium nitride is a material known to have low loss at microwave frequencies which sees practical use in many emerging quantum device architectures. The goal of this research is to investigate improvements in TiN thin films utilizing MBE to produce highly pure, highly crystalline films. A review of the theory of superconducting qubits is given and recent developments in superconducting qubit research are summarized to elucidate how loss has been reduced historically and the importance of materials improvements to the future of scalable quantum computation. The dynamics of epitaxial film growth are discussed, focusing on the formation of a minimum energy surface, the thermally driven kinetics of atoms deposited on the surface, and how these lead to the formation of large scale crystalline domains in the film. An overview of the MBE growth chamber is given and the growth procedure for TiN is discussed. Transport and morphology measurement results are discussed for MBE TiN where, for optimized growth conditions, films are highly crystalline with superconducting transition temperatures(Tc) as high as Tc = 6.1K, matching the value for bulk crystals and exceeding all reported thin film values. Microwave loss measurements of transmission line resonators fabricated from these films are shown to have low-power quality factors(Q) as high as 200,000 and an increase to Q = 400,000 at high power, consistent with the saturation of two-level-systems (TLS) at high power. These results confirm a connection between the high quality crystalline materials produced in this work and low loss in quantum circuits.

•May 29, 2015•3 citations

Epitaxial titanium nitride microwave resonators: Structural, chemical, electrical, and microwave properties

Ran Gao, Wenlong Yu, Hao Deng +6 more

Titanium nitride is an attractive material for a range of superconducting quantum-circuit applications owing to its low microwave losses, high surface inductance, and chemical stability. The physical properties and device performance, nevertheless, depend strongly on the quality of the materials. In this paper, we focus on the highly crystalline and epitaxial titanium nitride thin films deposited on sapphire substrates using magnetron sputtering at an intermediate temperature (${300}^{\ensuremath{\circ}}\mathrm{C}$). We performed a set of systematic and comprehensive material characterizations to thoroughly understand the structural, chemical, and transport properties. Microwave losses at low temperatures were studied using patterned microwave resonators, where the best internal quality factor in the single-photon regime is measured to be $3.3\ifmmode\times\else\texttimes\fi{}{10}^{6}$ and that in the high-power regime $>1.0\ifmmode\times\else\texttimes\fi{}{10}^{7}$. Adjusted with the material filling factor of the resonators, the microwave loss-tangent here compares well with the previously reported best values for superconducting resonators. This work lays the foundation of using epitaxial titanium nitride for low-loss superconducting quantum circuits.

arXiv:2111.04227•Physical Review Materials•Mar 24, 2022•34 citations

Microwave loss and kinetic inductance of epitaxial TiN films

Yu Wu, Yixin Liu, Wanpeng Gao +7 more

Abstract Low microwave loss and regulatable kinetic inductance are two key characteristics of superconducting films to manufacture high-performance quantum devices. Epitaxial titanium nitride (TiN) thin films have been found to exhibit significant advantages in these two aspects. In this paper, we investigated into the dielectric loss and kinetic inductance of epitaxial TiN films, which were prepared on both silicon and sapphire substrates with different temperatures. Crystal structure, surface morphology, and superconducting properties were characterized systematically. The radio-frequency response of microwave resonators made of TiN films was studied at low temperatures to extract the information of kinetic inductance and quality factor. We obtained the highest internal quality factor up to 1.6 × 10 6 at single photon regime and achieved a regulation of kinetic inductance exceeding 16 times by altering the substrate and the sputtering temperature of the TiN films. This work not only provides an essential foundation for the precise design and preparation of low-loss TiN resonators for superconducting quantum bits, but also demonstrates TiN film as an excellent material platform with both low microwave loss and high kinetic inductance that can be applied in other fields such as microwave kinetic inductance detectors.

Superconductor Science and Technology•Sep 18, 2024•4 citations

Low loss superconducting titanium nitride coplanar waveguide resonators

Michael R. Vissers, J. Gao, David Wisbey +5 more

Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into rf coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin temperatures in both the many photon and single photon limits, i.e., high and low electric field regimes, respectively. At high field, we found the highest internal quality factors (∼107) were measured for TiN with predominantly a (200)-TiN orientation. The (200)-TiN is favored for growth at high temperature on either bare Si or SiN buffer layers. However, growth on bare sapphire or Si(100) at low temperature resulted in primarily a (111)-TiN orientation. Ellipsometry and Auger measurements indicate that the (200)-TiN growth on the bare Si substrates is correlated with the formation of a thin, ≈2 nm, layer of SiN during the predeposition procedure. On these surfaces we found a significant increase of Qi for both high and low electric field regimes.

arXiv:1007.5096•Applied Physics Letters•Dec 6, 2010•189 citations
Using molecular beam epitaxy, we have realized thin films of titanium nitride (TiN) on c-plane sapphire that exhibit the lowest observed full-width at half maximum X-ray rocking curve width of 18 arcsec. Though the (111) oriented TiN exhibits an abrupt and crystalline interface with sapphire, for the first time we observe sub-surface defects in the sapphire substrate, which nucleate structural defects in the epitaxial TiN layer. Using quarter-wavelength coplanar waveguide (CPW) resonators in a 3 \textmu m/6 \textmu m/3 \textmu m gap/strip/gap lines in a hanger geometry, we find the internal quality factor of the TiN resonators to be >106>10^{6}>106 in the single-photon ⟨n⟩∼1\langle n \rangle \sim 1⟨n⟩∼1 limit at 5.8 GHz and 10 mK, rising to >20×106>20 \times 10^{6}>20×106 at ⟨n⟩∼106\langle n \rangle \sim 10^{6}⟨n⟩∼106. The results are of high interest for applications of superconducting TiN in several areas, and provide a path towards epitaxial Josephson junctions with crystalline barriers in the future for high coherence qubits.
Titanium nitride (TiN) is a known superconducting material that is attractive for use as passive components in superconducting circuits for both conventional and quantum information devices. In contrast to conventional synthesis techniques, here, plasma-assisted molecular beam epitaxy is reported to produce high-quality TiN on bare silicon wafers. Using a rf-plasma source to crack the nitrogen molecules and a conventional high-temperature effusion cell for titanium, TiN growth is completed under nitrogen-rich conditions. The growth and nucleation is monitored in situ, while the structure and composition are characterized using x-ray diffraction, atomic force microscopy, x-ray photoelectron spectroscopy, secondary ion mass spectroscopy, and scanning transmission electron microscopy. The stoichiometric TiN (111) films sit on an amorphous nitride layer with low impurity concentrations. The films superconduct with Tc=5.4 K, and coplanar waveguide resonators are fabricated with a small center width of 6 μm that demonstrate single-photon quality factors approaching 1M and high-power quality factors over 5M without observing saturation.
We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically investigate how deposition conditions, dry-etch power and in-situ resist strip temperature affect morphology, superconducting properties and dielectric losses. By tuning reactive sputtering conditions, three distinct preferred out-of-plane crystal orientations - (111), (200), and a mix of both are achieved. Our results demonstrate that all films exhibit similar minimal two-level system (TLS) losses, with TiN111 exhibiting the lowest median TLS losses δ~TLS\tildeδ_\mathrm{TLS}δ~TLS​, and greater robustness against reoxidation. The applied structuring process, in contrast, has a far greater influence on the TLS loss than the crystal orientation of the TiN film and, consequently, the intrinsic material properties of the superconducting layer. The lowest TLS losses for all TiN depositions were achieved with a low power etch and low temperature resist strip. An additional buffered oxide etch (BOE) treatment could remove high-loss interfacial oxides at the metal-air (MA) and substrate-air (SA) interface and recover the etch-induced TLS losses. Consequently, TiN resonators exhibiting δ~TLS\tildeδ_\mathrm{TLS}δ~TLS​ values as low as 9.67×10−79.67 \times 10^{-7}9.67×10−7 were realized. The corresponding median low-power loss, δ~LP\tildeδ_\mathrm{LP}δ~LP​, amounts to 11.04×10−711.04 \times 10^{-7}11.04×10−7, which translates to an internal quality factor approaching one million. These findings highlight the critical role of process induced oxide formation at the MA and SA interfaces in limiting the performance of TiN resonators and provide a scalable, low-loss process compatible with industry-grade 200\,mm CMOS qubit fabrication workflows.
This is a study of the growth of titanium-nitride (TiN) by plasma assisted molecular beam epitaxy (MBE) for applications in low loss quantum circuits. Titanium nitride is a material known to have low loss at microwave frequencies which sees practical use in many emerging quantum device architectures. The goal of this research is to investigate improvements in TiN thin films utilizing MBE to produce highly pure, highly crystalline films. A review of the theory of superconducting qubits is given and recent developments in superconducting qubit research are summarized to elucidate how loss has been reduced historically and the importance of materials improvements to the future of scalable quantum computation. The dynamics of epitaxial film growth are discussed, focusing on the formation of a minimum energy surface, the thermally driven kinetics of atoms deposited on the surface, and how these lead to the formation of large scale crystalline domains in the film. An overview of the MBE growth chamber is given and the growth procedure for TiN is discussed. Transport and morphology measurement results are discussed for MBE TiN where, for optimized growth conditions, films are highly crystalline with superconducting transition temperatures(Tc) as high as Tc = 6.1K, matching the value for bulk crystals and exceeding all reported thin film values. Microwave loss measurements of transmission line resonators fabricated from these films are shown to have low-power quality factors(Q) as high as 200,000 and an increase to Q = 400,000 at high power, consistent with the saturation of two-level-systems (TLS) at high power. These results confirm a connection between the high quality crystalline materials produced in this work and low loss in quantum circuits.
Titanium nitride is an attractive material for a range of superconducting quantum-circuit applications owing to its low microwave losses, high surface inductance, and chemical stability. The physical properties and device performance, nevertheless, depend strongly on the quality of the materials. In this paper, we focus on the highly crystalline and epitaxial titanium nitride thin films deposited on sapphire substrates using magnetron sputtering at an intermediate temperature (${300}^{\ensuremath{\circ}}\mathrm{C}$). We performed a set of systematic and comprehensive material characterizations to thoroughly understand the structural, chemical, and transport properties. Microwave losses at low temperatures were studied using patterned microwave resonators, where the best internal quality factor in the single-photon regime is measured to be $3.3\ifmmode\times\else\texttimes\fi{}{10}^{6}$ and that in the high-power regime $>1.0\ifmmode\times\else\texttimes\fi{}{10}^{7}$. Adjusted with the material filling factor of the resonators, the microwave loss-tangent here compares well with the previously reported best values for superconducting resonators. This work lays the foundation of using epitaxial titanium nitride for low-loss superconducting quantum circuits.
Abstract Low microwave loss and regulatable kinetic inductance are two key characteristics of superconducting films to manufacture high-performance quantum devices. Epitaxial titanium nitride (TiN) thin films have been found to exhibit significant advantages in these two aspects. In this paper, we investigated into the dielectric loss and kinetic inductance of epitaxial TiN films, which were prepared on both silicon and sapphire substrates with different temperatures. Crystal structure, surface morphology, and superconducting properties were characterized systematically. The radio-frequency response of microwave resonators made of TiN films was studied at low temperatures to extract the information of kinetic inductance and quality factor. We obtained the highest internal quality factor up to 1.6 × 10 6 at single photon regime and achieved a regulation of kinetic inductance exceeding 16 times by altering the substrate and the sputtering temperature of the TiN films. This work not only provides an essential foundation for the precise design and preparation of low-loss TiN resonators for superconducting quantum bits, but also demonstrates TiN film as an excellent material platform with both low microwave loss and high kinetic inductance that can be applied in other fields such as microwave kinetic inductance detectors.
Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into rf coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin temperatures in both the many photon and single photon limits, i.e., high and low electric field regimes, respectively. At high field, we found the highest internal quality factors (∼107) were measured for TiN with predominantly a (200)-TiN orientation. The (200)-TiN is favored for growth at high temperature on either bare Si or SiN buffer layers. However, growth on bare sapphire or Si(100) at low temperature resulted in primarily a (111)-TiN orientation. Ellipsometry and Auger measurements indicate that the (200)-TiN growth on the bare Si substrates is correlated with the formation of a thin, ≈2 nm, layer of SiN during the predeposition procedure. On these surfaces we found a significant increase of Qi for both high and low electric field regimes.