The Quantum Control Processor (QCP) bridges the gap between compiler toolchains and control electronics, and is responsible for translating compiled quantum circuits into executable instructions that directly manipulate qubits and handle measurement feedback. However, existing designs rely primarily on customized instruction sets, limiting design reuse and requiring significant effort to build supporting toolchains. Furthermore, efficiently addressing qubits and scheduling operations in highly scalable scenarios remains a critical challenge. In this work, we present a vectorized quantum control approach built upon the RISC-V Vector (RVV) engine with a quantum-oriented extension. Leveraging the high parallelism of RVV, our approach can address up to 128 qubits in a single instruction. We also embed parameterized rotation information into the instruction set, enabling dynamic tuning of gate rotations in hybrid quantum-classical programs. To support mid-circuit measurements, we design a hardware-based halt-resume protocol that resumes pipeline execution within 80 $ns$ of receiving the measurement result. Comprehensive evaluation using both RISC-V toolchains and FPGA prototypes demonstrates that our design achieves up to 2.52$\times$ speedup over the baseline in program execution time, with excellent scalability.
Comments
Accepted at IEEE International Conference on Quantum Computing and Engineering (QCE) 2026
The Quantum Control Processor (QCP) bridges the gap between compiler toolchains and control electronics, and is responsible for translating compiled quantum circuits into executable instructions that directly manipulate qubits and handle measurement feedback. However, existing designs rely primarily on customized instruction sets, limiting design reuse and requiring significant effort to build supporting toolchains. Furthermore, efficiently addressing qubits and scheduling operations in highly scalable scenarios remains a critical challenge. In this work, we present a vectorized quantum control approach built upon the RISC-V Vector (RVV) engine with a quantum-oriented extension. Leveraging the high parallelism of RVV, our approach can address up to 128 qubits in a single instruction. We also embed parameterized rotation information into the instruction set, enabling dynamic tuning of gate rotations in hybrid quantum-classical programs. To support mid-circuit measurements, we design a hardware-based halt-resume protocol that resumes pipeline execution within 80 ns of receiving the measurement result. Comprehensive evaluation using both RISC-V toolchains and FPGA prototypes demonstrates that our design achieves up to 2.52× speedup over the baseline in program execution time, with excellent scalability.
Quantum computing imposes stringent requirements for the precise control of large-scale qubit systems, including, for example, microsecond-latency feedback and nanosecond-precision timing of gigahertz signals—demands that far exceed the capabilities of conventional real-time systems. The rapidly evolving and highly diverse nature of quantum control necessitates the development of specialized hardware accelerators. While a few custom real-time systems have been developed to meet the tight timing constraints of specific quantum platforms, they face major challenges in scaling and adapting to increasingly complex control demands—largely due to fragmented toolchains and limited support for design automation. To address these limitations, we present RISC-Q—an open-source flexible generator for Quantum Control System-on-Chip (QCSoC) designs, featuring a programming interface compatible with the RISC-V ecosystem. Developed using SpinalHDL, RISC-Q enables efficient automation of highly parameterized and modular QCSoC architectures, supporting agile and iterative development to meet the evolving demands of quantum control. We demonstrate that RISC-Q can replicate the performance of existing QCSoCs with significantly reduced development effort, facilitating efficient exploration of the hardware-software co-design space for rapid prototyping and customization.
Quantum computing promises an effective way to solve targeted problems that are classically intractable. Among them, quantum computers built with superconducting qubits are considered one of the most advanced technologies, but they suffer from short coherence times. This can get exaggerated when they are controlled directly by general-purpose host machines, which in turn leads to the loss of quantum information. To mitigate this, we need quantum control processors (QCPs) positioned between quantum processing units (QPUs) and host machines to reduce latencies. However, existing QCPs are built on top of designs with no or inefficient scalability, requiring a large number of instructions when scaling to more qubits. In addition, interactions between current QCPs and host machines require frequent data transmissions and offline computations to obtain final results from hundreds of repeated executions, which limits the performance of quantum computers.In this paper, we propose a QCP — called HiSEP-Q — featuring a novel quantum instruction set architecture (QISA) and its microarchitecture implementation. For efficient control, we utilize mixed-type addressing modes and mixed-length instructions in HiSEP-Q, which provides an efficient way to concurrently address more than 100 qubits. Further, for efficient read-out and analysis, we develop a novel onboard accumulation and sorting unit, which eliminates the data transmission of raw data between the QCPs and host machines and enables real-time result processing. Compared to the state-of-the-art, our proposed QISA achieves at least 62% and 28% improvements in encoding efficiency with real and synthetic quantum circuits, respectively. We also validate the microarchitecture on a field-programmable gate array (FPGA), which exhibits low power and resource consumption, even as the number of qubits scales to 100. Both hardware and ISA evaluations demonstrate that HiSEP-Q features high scalability and efficiency toward the number of controlled qubits.
Continuing the scaling of quantum computers hinges on building classical control hardware pipelines that are scalable, extensible, and provide real time response. The instruction set architecture (ISA) of the control processor provides functional abstractions that map high-level semantics of quantum programming languages to low-level pulse generation by hardware. In this paper, we provide a methodology to quantitatively assess the effectiveness of the ISA to encode quantum circuits for intermediate-scale quantum devices with O(102) qubits. The characterization model that we define reflects performance, the ability to meet timing constraint implications, scalability for future quantum chips, and other important considerations making them useful guides for future designs. Using our methodology, we propose scalar (QUASAR) and vector (qV) quantum ISAs as extensions and compare them with other ISAs in metrics such as circuit encoding efficiency, the ability to meet real-time gate cycle requirements of quantum chips, and the ability to scale to more qubits.
Scaling bottlenecks the making of digital quantum computers, posing challenges from both the quantum and the classical components. We present a classical architecture to cope with a comprehensive list of the latter challenges all at once , and implement it fully in an end-to-end system by integrating a multi-core RISC-V CPU with our in-house control electronics. Our architecture enables scalable, high-precision control of large quantum processors and accommodates evolving requirements of quantum hardware. A central feature is a microarchitecture executing quantum operations in parallel on arbitrary predefined qubit groups. Another key feature is a reconfigurable quantum instruction set that supports easy qubit re-grouping and instructions extensions. As a demonstration, we implement the widely-studied surface code quantum computing workflow, which is instructive for being demanding on both the controllers and the integrated classical computation. Our design, for the first time, reduces instruction issuing and transmission costs to constants, which do not scale with the number of qubits, without adding any overheads in decoding or dispatching. Our system uses a dedicated general-purpose CPU for both qubit control and classical computation, including syndrome decoding. Implementing recent theoretical proposals as decoding firmware that parallelizes general inner decoders, we can achieve unprecedented decoding capabilities of up to distances 47 and 67 with the currently available systems-on-chips for physical error rate p = 0.001 and p = 0.0001, respectively, all in just 1 μs.
Researchers and industries are increasingly drawn to quantum computing for its computational potential. However, validating new quantum algorithms is challenging due to current quantum device limitations. Software simulators are time and memory-intensive, making hardware emulators an attractive alternative. This article introduces a digital architecture, designed to emulate quantum computing on low-tier Field-Programmable Gate Arrays (FPGAs), supporting Clifford+T and rotational gate sets. It simplifies and accelerates quantum algorithm verification using a RISC-like structure and efficiently handling sparse quantum gates. A dedicated compiler translates OpenQASM 2.0 into RISC-like instructions. The architecture is validated against the Qiskit state vector simulator, successfully emulating sixteen qubits on a Xilinx Kria KV260 SoM.
ARM SVE and RISC-V RVV are emerging vector architectures in high-end processors that support vectorization of flexible vector length. In this work, we leverage an important workload for quantum computing, quantum state-vector simulations, to understand whether high-performance portability can be achieved in a vector-length agnostic (VLA) design. We propose a VLA design and optimization techniques critical for achieving high performance, including VLEN-adaptive memory layout adjustment, load buffering, fine-grained loop control, and gate fusion-based arithmetic intensity adaptation. We provide an implementation in Google's Qsim and evaluate five quantum circuits of up to 36 qubits on three ARM processors, including NVIDIA Grace, AWS Graviton3, and Fujitsu A64FX. By defining new metrics and PMU events to quantify vectorization activities, we draw generic insights for future VLA designs. Our single-source implementation of VLA quantum simulations achieves up to 4.5x speedup on A64FX, 2.5x speedup on Grace, and 1.5x speedup on Graviton.