Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2308.16776 · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD)

HiSEP-Q: A Highly Scalable and Efficient Quantum Control Processor for Superconducting Qubits

Xiaorang Guo, Kun Qin, Martin Schulz

Published Nov 6, 2023• 9 citations
arXivHTMLPDF

Abstract

Quantum computing promises an effective way to solve targeted problems that are classically intractable. Among them, quantum computers built with superconducting qubits are considered one of the most advanced technologies, but they suffer from short coherence times. This can get exaggerated when they are controlled directly by general-purpose host machines, which in turn leads to the loss of quantum information. To mitigate this, we need quantum control processors (QCPs) positioned between quantum processing units (QPUs) and host machines to reduce latencies. However, existing QCPs are built on top of designs with no or inefficient scalability, requiring a large number of instructions when scaling to more qubits. In addition, interactions between current QCPs and host machines require frequent data transmissions and offline computations to obtain final results from hundreds of repeated executions, which limits the performance of quantum computers.In this paper, we propose a QCP — called HiSEP-Q — featuring a novel quantum instruction set architecture (QISA) and its microarchitecture implementation. For efficient control, we utilize mixed-type addressing modes and mixed-length instructions in HiSEP-Q, which provides an efficient way to concurrently address more than 100 qubits. Further, for efficient read-out and analysis, we develop a novel onboard accumulation and sorting unit, which eliminates the data transmission of raw data between the QCPs and host machines and enables real-time result processing. Compared to the state-of-the-art, our proposed QISA achieves at least 62% and 28% improvements in encoding efficiency with real and synthetic quantum circuits, respectively. We also validate the microarchitecture on a field-programmable gate array (FPGA), which exhibits low power and resource consumption, even as the number of qubits scales to 100. Both hardware and ISA evaluations demonstrate that HiSEP-Q features high scalability and efficiency toward the number of controlled qubits.

DOI
10.1109/iccd58817.2023.00023

Related papers

A Scalable and Cross-Technology Quantum Control Processor

Xiaorang Guo, Martin Schulz

Quantum control processors (QCPs) bridge the gap between the quantum software and the hardware backend to construct full-stack quantum computers. In this study, the quantum backend interface is responsible for generating pulses to control qubits, where commercial waveform generators or specific converters are typically needed. A radio frequency system-on-chip (RFSoC)-based QCP supports a direct control pulse synthesis without additional components. Therefore, in this work, we propose an RFSoC-based QCP that integrates the processor and pulse generation logic onto a single board. With the help of the proposed instruction set and efficient microarchitecture implementation, the QCP offers large scalability for controllable qubits, while supporting different physical platforms.

International Conference on Field Programmable Logic and Applications (FPL)•Sep 4, 2023•4 citations

A Scalable Microarchitecture for Efficient Instruction-Driven Signal Synthesis and Coherent Qubit Control

Nader Khammassi, Randy Morris, Shavindra Premaratne +7 more

Execution of quantum algorithms requires a quantum computer architecture with a dedicated quantum instruction set that is capable of supporting translation of workloads into actual quantum operations acting on the qubits. State-of-the-art qubit control setups typically utilize general purpose test instruments such as arbitrary waveform generators (AWGs) to generate a limited set of waveforms or pulses. These waveforms are precomputed and stored prior to execution, and then used to produce control pulses during execution. Besides their prohibitive cost and limited scalability, such instruments suffer from poor programmability due to the absence of an instruction set architecture (ISA). Limited memory for pulse storage ultimately determines the total number of supported quantum operations. In this work, we present a scalable qubit control system that enables efficient qubit control using a flexible ISA to drive a direct digital synthesis (DDS) pipeline producing nanosecond-accurate qubit control signals dynamically. The designed qubit controller provides a higher density of control channels, a scalable design, better programmability, and lower cost compared to state-of-the-art systems. In this work, we discuss the new qubit controller's capabilities, its architecture and instruction set, and present experimental results for coherent qubit control.

arXiv:2205.06851•May 13, 2022•4 citations

A Classical Architecture for Digital Quantum Computers

Fang Zhang, Xing Zhu, Rui Chao +15 more

Scaling bottlenecks the making of digital quantum computers, posing challenges from both the quantum and the classical components. We present a classical architecture to cope with a comprehensive list of the latter challenges all at once , and implement it fully in an end-to-end system by integrating a multi-core RISC-V CPU with our in-house control electronics. Our architecture enables scalable, high-precision control of large quantum processors and accommodates evolving requirements of quantum hardware. A central feature is a microarchitecture executing quantum operations in parallel on arbitrary predefined qubit groups. Another key feature is a reconfigurable quantum instruction set that supports easy qubit re-grouping and instructions extensions. As a demonstration, we implement the widely-studied surface code quantum computing workflow, which is instructive for being demanding on both the controllers and the integrated classical computation. Our design, for the first time, reduces instruction issuing and transmission costs to constants, which do not scale with the number of qubits, without adding any overheads in decoding or dispatching. Our system uses a dedicated general-purpose CPU for both qubit control and classical computation, including syndrome decoding. Implementing recent theoretical proposals as decoding firmware that parallelizes general inner decoders, we can achieve unprecedented decoding capabilities of up to distances 47 and 67 with the currently available systems-on-chips for physical error rate p = 0.001 and p = 0.0001, respectively, all in just 1 μs.

arXiv:2305.14304•ACM Transactions on Quantum Computing•Sep 29, 2023•10 citations

Distributed Processor for FPGA-based Superconducting Qubit Control

Neelay Fruitwala, Yilun Xu, Ravi Naik +2 more

Quantum circuits utilizing real time feedback techniques (such as active reset and mid-circuit measurement) are a powerful tool for NISQ-era quantum computing. Such techniques are crucial for implementing error correction protocols, and can reduce the resource requirements of certain quantum algorithms. Realizing these capabilities requires flexible, low-latency classical control. We present the development of an open-source FPGA (field-programmable gate array) based processor for pulse-level qubit control. Our processor is designed primarily as an upgrade to QubiC, an open source qubit control platform, but can also be adapted to other systems. The processor is distributed in nature, with one core per arbitrary waveform generator (AWG); simplifying the design and allowing for straightforward scaling. Each processor core implements an instruction set consisting of timed pulse commands as well as simple arithmetic and branching instructions. Our design also includes interfaces for synchronizing the different cores and requesting/receiving (optionally processed) measurement results. Together, these features will allow a user to program arbitrary control flow within a quantum circuit based on previous measurement results. In this poster, we detail our design along with the expected resource utilization on the Xilinx Virtex 7 FPGA, and present pulse-level simulations of our system in the context of a simple feedback experiment.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 1, 2022•4 citations

An experimental microarchitecture for a superconducting quantum processor

Xiang Fu, Michiel Adriaan Rol, Cornelis Christiaan Bultink +10 more

Quantum computers promise to solve certain problems that are intractable for classical computers, such as factoring large numbers and simulating quantum systems. To date, research in quantum computer engineering has focused primarily at opposite ends of the required system stack: devising high-level programming languages and compilers to describe and optimize quantum algorithms, and building reliable low-level quantum hardware. Relatively little attention has been given to using the compiler output to fully control the operations on experimental quantum processors. Bridging this gap, we propose and build a prototype of a flexible control microarchitecture supporting quantum-classical mixed code for a superconducting quantum processor. The microarchitecture is based on three core elements: (i) a codeword-based event control scheme, (ii) queue-based precise event timing control, and (iii) a flexible multilevel instruction decoding mechanism for control. We design a set of quantum microinstructions that allows flexible control of quantum operations with precise timing. We demonstrate the microarchitecture and microinstruction set by performing a standard gate-characterization experiment on a transmon qubit.

arXiv:1708.07677•IEEE/ACM International Symposium on Microarchitecture (MICRO)•Oct 14, 2017•99 citations

Quantum Control Architecture and Circuit Blocks for Solid-State Microwave Qubits

Fatemeh Nikbakhtnasrabadi, Martin P. Weides

Quantum computing has made significant strides, with hardware platforms now advanced enough to tackle the challenges of scaling up to larger and more robust systems. Central to this progression is the interface between quantum processors, comprising isolated qubits, and the classical systems required for their control and readout. As these systems transition from few-qubit devices to fault-tolerant architectures, the complexity of this quantum-classical interaction poses significant engineering challenges. Field-Programmable Gate Arrays (FPGAs) have emerged as an adaptable and efficient solution, offering realtime control, low-latency operations, and seamless integration. This review delves into current FPGA-based platforms, including commercial systems, as well as open-source solutions developed by academic research groups. The architecture, features, and contributions of these platforms to addressing scalability and integration issues are thoroughly examined. Additionally, the review highlights innovations in cryogeniccompatible controllers and explores the potential of Cryo-FPGAs to reduce noise and improve fidelity in quantum systems. By providing a comprehensive analysis of current technologies and identifying opportunities for advancement, this review offers valuable insights for researchers and engineers working to develop scalable quantum computing solutions.

•Feb 11, 2025•0 citations
Quantum computing promises an effective way to solve targeted problems that are classically intractable. Among them, quantum computers built with superconducting qubits are considered one of the most advanced technologies, but they suffer from short coherence times. This can get exaggerated when they are controlled directly by general-purpose host machines, which in turn leads to the loss of quantum information. To mitigate this, we need quantum control processors (QCPs) positioned between quantum processing units (QPUs) and host machines to reduce latencies. However, existing QCPs are built on top of designs with no or inefficient scalability, requiring a large number of instructions when scaling to more qubits. In addition, interactions between current QCPs and host machines require frequent data transmissions and offline computations to obtain final results from hundreds of repeated executions, which limits the performance of quantum computers.In this paper, we propose a QCP — called HiSEP-Q — featuring a novel quantum instruction set architecture (QISA) and its microarchitecture implementation. For efficient control, we utilize mixed-type addressing modes and mixed-length instructions in HiSEP-Q, which provides an efficient way to concurrently address more than 100 qubits. Further, for efficient read-out and analysis, we develop a novel onboard accumulation and sorting unit, which eliminates the data transmission of raw data between the QCPs and host machines and enables real-time result processing. Compared to the state-of-the-art, our proposed QISA achieves at least 62% and 28% improvements in encoding efficiency with real and synthetic quantum circuits, respectively. We also validate the microarchitecture on a field-programmable gate array (FPGA), which exhibits low power and resource consumption, even as the number of qubits scales to 100. Both hardware and ISA evaluations demonstrate that HiSEP-Q features high scalability and efficiency toward the number of controlled qubits.
Quantum control processors (QCPs) bridge the gap between the quantum software and the hardware backend to construct full-stack quantum computers. In this study, the quantum backend interface is responsible for generating pulses to control qubits, where commercial waveform generators or specific converters are typically needed. A radio frequency system-on-chip (RFSoC)-based QCP supports a direct control pulse synthesis without additional components. Therefore, in this work, we propose an RFSoC-based QCP that integrates the processor and pulse generation logic onto a single board. With the help of the proposed instruction set and efficient microarchitecture implementation, the QCP offers large scalability for controllable qubits, while supporting different physical platforms.
Execution of quantum algorithms requires a quantum computer architecture with a dedicated quantum instruction set that is capable of supporting translation of workloads into actual quantum operations acting on the qubits. State-of-the-art qubit control setups typically utilize general purpose test instruments such as arbitrary waveform generators (AWGs) to generate a limited set of waveforms or pulses. These waveforms are precomputed and stored prior to execution, and then used to produce control pulses during execution. Besides their prohibitive cost and limited scalability, such instruments suffer from poor programmability due to the absence of an instruction set architecture (ISA). Limited memory for pulse storage ultimately determines the total number of supported quantum operations. In this work, we present a scalable qubit control system that enables efficient qubit control using a flexible ISA to drive a direct digital synthesis (DDS) pipeline producing nanosecond-accurate qubit control signals dynamically. The designed qubit controller provides a higher density of control channels, a scalable design, better programmability, and lower cost compared to state-of-the-art systems. In this work, we discuss the new qubit controller's capabilities, its architecture and instruction set, and present experimental results for coherent qubit control.
Scaling bottlenecks the making of digital quantum computers, posing challenges from both the quantum and the classical components. We present a classical architecture to cope with a comprehensive list of the latter challenges all at once , and implement it fully in an end-to-end system by integrating a multi-core RISC-V CPU with our in-house control electronics. Our architecture enables scalable, high-precision control of large quantum processors and accommodates evolving requirements of quantum hardware. A central feature is a microarchitecture executing quantum operations in parallel on arbitrary predefined qubit groups. Another key feature is a reconfigurable quantum instruction set that supports easy qubit re-grouping and instructions extensions. As a demonstration, we implement the widely-studied surface code quantum computing workflow, which is instructive for being demanding on both the controllers and the integrated classical computation. Our design, for the first time, reduces instruction issuing and transmission costs to constants, which do not scale with the number of qubits, without adding any overheads in decoding or dispatching. Our system uses a dedicated general-purpose CPU for both qubit control and classical computation, including syndrome decoding. Implementing recent theoretical proposals as decoding firmware that parallelizes general inner decoders, we can achieve unprecedented decoding capabilities of up to distances 47 and 67 with the currently available systems-on-chips for physical error rate p = 0.001 and p = 0.0001, respectively, all in just 1 μs.
Quantum circuits utilizing real time feedback techniques (such as active reset and mid-circuit measurement) are a powerful tool for NISQ-era quantum computing. Such techniques are crucial for implementing error correction protocols, and can reduce the resource requirements of certain quantum algorithms. Realizing these capabilities requires flexible, low-latency classical control. We present the development of an open-source FPGA (field-programmable gate array) based processor for pulse-level qubit control. Our processor is designed primarily as an upgrade to QubiC, an open source qubit control platform, but can also be adapted to other systems. The processor is distributed in nature, with one core per arbitrary waveform generator (AWG); simplifying the design and allowing for straightforward scaling. Each processor core implements an instruction set consisting of timed pulse commands as well as simple arithmetic and branching instructions. Our design also includes interfaces for synchronizing the different cores and requesting/receiving (optionally processed) measurement results. Together, these features will allow a user to program arbitrary control flow within a quantum circuit based on previous measurement results. In this poster, we detail our design along with the expected resource utilization on the Xilinx Virtex 7 FPGA, and present pulse-level simulations of our system in the context of a simple feedback experiment.
Quantum computers promise to solve certain problems that are intractable for classical computers, such as factoring large numbers and simulating quantum systems. To date, research in quantum computer engineering has focused primarily at opposite ends of the required system stack: devising high-level programming languages and compilers to describe and optimize quantum algorithms, and building reliable low-level quantum hardware. Relatively little attention has been given to using the compiler output to fully control the operations on experimental quantum processors. Bridging this gap, we propose and build a prototype of a flexible control microarchitecture supporting quantum-classical mixed code for a superconducting quantum processor. The microarchitecture is based on three core elements: (i) a codeword-based event control scheme, (ii) queue-based precise event timing control, and (iii) a flexible multilevel instruction decoding mechanism for control. We design a set of quantum microinstructions that allows flexible control of quantum operations with precise timing. We demonstrate the microarchitecture and microinstruction set by performing a standard gate-characterization experiment on a transmon qubit.
Quantum computing has made significant strides, with hardware platforms now advanced enough to tackle the challenges of scaling up to larger and more robust systems. Central to this progression is the interface between quantum processors, comprising isolated qubits, and the classical systems required for their control and readout. As these systems transition from few-qubit devices to fault-tolerant architectures, the complexity of this quantum-classical interaction poses significant engineering challenges. Field-Programmable Gate Arrays (FPGAs) have emerged as an adaptable and efficient solution, offering realtime control, low-latency operations, and seamless integration. This review delves into current FPGA-based platforms, including commercial systems, as well as open-source solutions developed by academic research groups. The architecture, features, and contributions of these platforms to addressing scalability and integration issues are thoroughly examined. Additionally, the review highlights innovations in cryogeniccompatible controllers and explores the potential of Cryo-FPGAs to reduce noise and improve fidelity in quantum systems. By providing a comprehensive analysis of current technologies and identifying opportunities for advancement, this review offers valuable insights for researchers and engineers working to develop scalable quantum computing solutions.