Ultracold neutral atoms in an optical lattice and an optical tweezer array offer highly-controllable quantum many-body systems, utilized for various quantum science and technology such as quantum computing, quantum metrology, and quantum simulation. By combining high-fidelity imaging of individual atoms, one can further enhance the capability of such experimental platforms as quantum gas microscopes, tweezer clocks, and tweezer-array-based quantum computers. In this work, we propose a minimally destructive single-atom imaging by deterministic coherent excitation of atoms with alternately applied pi-pulses from counter-propagating directions, mitigating the fundamental heating effect associated with the stochastic absorption process. Using ytterbium-174 atoms trapped in an optical tweezer array, we experimentally demonstrate fast and low-loss single-atom imaging with a discrimination fidelity of 99.89(5) % and a survival probability of 98.80(44) % in 17.6 microseconds. Importantly, our scheme exhibits the lower heating rate, about half of that of the former scheme utilizing the incoherent excitation. This fast and minimally destructive imaging scheme is beneficial for relaxing the requirement on the trap depth, thereby enabling scalable atom imaging across a wide range of quantum science platforms.
Comments
12 pages, 7 figures. v2: minor textual corrections and extended simulation data in Fig. 4
Ultracold neutral atoms in an optical lattice and an optical tweezer array offer highly-controllable quantum many-body systems, utilized for various quantum science and technology such as quantum computing, quantum metrology, and quantum simulation. By combining high-fidelity imaging of individual atoms, one can further enhance the capability of such experimental platforms as quantum gas microscopes, tweezer clocks, and tweezer-array-based quantum computers. In this work, we propose a minimally destructive single-atom imaging by deterministic coherent excitation of atoms with alternately applied pi-pulses from counter-propagating directions, mitigating the fundamental heating effect associated with the stochastic absorption process. Using ytterbium-174 atoms trapped in an optical tweezer array, we experimentally demonstrate fast and low-loss single-atom imaging with a discrimination fidelity of 99.89(5) % and a survival probability of 98.80(44) % in 17.6 microseconds. Importantly, our scheme exhibits the lower heating rate, about half of that of the former scheme utilizing the incoherent excitation. This fast and minimally destructive imaging scheme is beneficial for relaxing the requirement on the trap depth, thereby enabling scalable atom imaging across a wide range of quantum science platforms.
Scalable atom-based quantum platforms for simulation, computing, and metrology require fast high-fidelity, low-loss imaging of individual atoms. Standard fluorescence detection methods rely on continuous cooling, limiting the detection range to one atom and imposing long imaging times that constrain the experimental cycle and midcircuit conditional operations. Here, we demonstrate fast and low-loss single-atom imaging in optical tweezers without active cooling, enabled by the favorable properties of ytterbium. Collecting fluorescence over microsecond timescales, we reach single-atom discrimination fidelities above 99.9% and single-shot survival probabilities above 99.5%. Through interleaved recooling pulses, as short as a few hundred microseconds for atoms in magic traps, we perform tens of consecutive detections with constant atom-retention probability per image-an essential step toward fast atom reuse in tweezer-based processors and clocks. Our scheme does not induce parity projection in multiply occupied traps, enabling number-resolved single-shot detection of several atoms per site. This allows us to study the near-deterministic preparation of single atoms in tweezers driven by blue-detuned light-assisted collisions. Moreover, the near-diffraction-limited spatial resolution of our low-loss imaging enables number-resolved microscopy in dense arrays, opening the way to direct site-occupancy readout in optical lattices for density fluctuation and correlation measurements in quantum simulators.
Engineering controllable, strongly interacting many-body quantum systems is at the frontier of quantum simulation and quantum information processing. Arrays of laser-cooled neutral atoms in optical tweezers have emerged as a promising platform because of their flexibility and the potential for strong interactions via Rydberg states. Existing neutral atom array experiments utilize alkali atoms, but alkaline-earth atoms offer many advantages in terms of coherence and control, and also open the door to new applications in precision measurement and time keeping. In this Letter, we present a technique to trap individual alkaline-earth-like ytterbium (Yb) atoms in optical tweezer arrays. The narrow ^{1}S_{0}-^{3}P_{1} intercombination line is used for both cooling and imaging in a magic-wavelength optical tweezer at 532 nm. The low Doppler temperature allows for imaging near the saturation intensity, resulting in a very high atom detection fidelity. We demonstrate the imaging fidelity concretely by observing rare (<1 in 10^{4} images) spontaneous quantum jumps into and out of a metastable state. We also demonstrate stochastic loading of atoms into a two-dimensional, 144-site tweezer array. This platform will enable advances in quantum information processing, quantum simulation, and precision measurement. The demonstrated narrow-line Doppler imaging may also be applied in tweezer arrays or quantum gas microscopes using other atoms with similar transitions, such as erbium and dysprosium.
Optical tweezer arrays 1,2 have transformed atomic and molecular physics, now forming the backbone for a range of leading experiments in quantum computing 3–8 , simulation 1,9–12 , and metrology 13–15 . Typical experiments trap tens to hundreds of atomic qubits, and recently systems with around one thousand atoms were realized without defining qubits or demonstrating coherent control 16–18 . However, scaling to thousands of atomic qubits with long coherence times, low-loss, and high-fidelity imaging is an outstanding challenge and critical for progress in quantum science, particularly towards quantum error correction 19,20 . Here, we experimentally realize an array of optical tweezers trapping over 6,100 neutral atoms in around 12,000 sites, simultaneously surpassing state-of-the-art performance for several metrics that underpin the success of the platform. Specifically, while scaling to such a large number of atoms, we demonstrate a coherence time of 12.6(1) seconds, a record for hyperfine qubits in an optical tweezer array. We show room-temperature trapping lifetimes of ~ 23 minutes, enabling record-high imaging survival of 99.98952(1)% with an imaging fidelity of over 99.99%. We present a plan for zone-based quantum computing 5,21 and demonstrate necessary coherence-preserving qubit transport and pick-up/drop-off operations on large spatial scales, characterized through interleaved randomized benchmarking. Our results, along with recent developments 8,22–24 , indicate that universal quantum computing and quantum error correction with thousands to tens of thousands of physical qubits could be a near-term prospect.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
High-resolution fluorescence imaging of ultracold atoms and molecules is paramount to performing quantum simulation and computation in optical lattices and tweezers. Imaging durations in these experiments typically range from a millisecond to a second, significantly limiting the cycle time. In this work, we present fast, 2.4 μs single-atom imaging in lattices, with 99.4% fidelity - pushing the readout duration of neutral atom quantum platforms to be close to that of superconducting qubit platforms. Additionally, we thoroughly study the performance of accordion lattices. We also demonstrate number-resolved imaging without parity projection, which will facilitate experiments such as the exploration of high-filling phases in the extended Bose-Hubbard models, multi-band or SU(N) Fermi-Hubbard models, and quantum link models. High-resolution imaging is essential for quantum simulation and computation in optical lattices and tweezers. Here, authors achieve fast 2.4-microsecond single-atom imaging with 99.4% fidelity and demonstrate number-resolved imaging without parity projection, advancing quantum readout capabilities.
Recent advances in quantum simulation based on neutral atoms have largely benefited from high-resolution, single-atom sensitive imaging techniques. A variety of approaches have been developed to achieve such local detection of atoms in optical lattices or optical tweezers. For alkaline-earth and alkaline-earth-like atoms, the presence of narrow optical transitions opens up the possibility of performing novel types of Sisyphus cooling, where the cooling mechanism originates from the capability to spatially resolve the differential optical level shifts in the trap potential. Up to now, it has been an open question whether high-fidelity imaging could be achieved in a "repulsive Sisyphus" configuration, where the trap depth of the ground state exceeds that of the excited state involved in cooling. Here, we demonstrate high-fidelity (99.971(1)%) and high-survival (99.80(5)%) imaging of strontium atoms using repulsive Sisyphus cooling. We use an optical lattice as a pinning potential for atoms in a large-scale tweezer array with up to 399 tweezers and show repeated, high-fidelity lattice-tweezer-lattice transfers. We furthermore demonstrate loading the lattice with approximately 10 000 atoms directly from the MOT and scalable imaging over >10 000 lattice sites with a combined survival probability and classification fidelity better than 99.2%. Our lattice thus serves as a locally addressable and sortable reservoir for continuous refilling of optical tweezer arrays in the future.