Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.12021 · Nature

A tweezer array with 6,100 highly coherent atomic qubits

Hannah J. Manetsch, Gyohei Nomura, Elie Bataille, Xudong Lv, Kon H. Leung, Manuel Endres

Published Sep 24, 2025• 127 citations
arXivHTMLPDF

Abstract

Optical tweezer arrays 1,2 have transformed atomic and molecular physics, now forming the backbone for a range of leading experiments in quantum computing 3–8 , simulation 1,9–12 , and metrology 13–15 . Typical experiments trap tens to hundreds of atomic qubits, and recently systems with around one thousand atoms were realized without defining qubits or demonstrating coherent control 16–18 . However, scaling to thousands of atomic qubits with long coherence times, low-loss, and high-fidelity imaging is an outstanding challenge and critical for progress in quantum science, particularly towards quantum error correction 19,20 . Here, we experimentally realize an array of optical tweezers trapping over 6,100 neutral atoms in around 12,000 sites, simultaneously surpassing state-of-the-art performance for several metrics that underpin the success of the platform. Specifically, while scaling to such a large number of atoms, we demonstrate a coherence time of 12.6(1) seconds, a record for hyperfine qubits in an optical tweezer array. We show room-temperature trapping lifetimes of ~ 23 minutes, enabling record-high imaging survival of 99.98952(1)% with an imaging fidelity of over 99.99%. We present a plan for zone-based quantum computing 5,21 and demonstrate necessary coherence-preserving qubit transport and pick-up/drop-off operations on large spatial scales, characterized through interleaved randomized benchmarking. Our results, along with recent developments 8,22–24 , indicate that universal quantum computing and quantum error correction with thousands to tens of thousands of physical qubits could be a near-term prospect.

DOI
10.1038/s41586-025-09641-4

Related papers

Scaling Neutral Atom Tweezer Arrays to 6,100 Qubits

Hannah J. Manetsch

Optical tweezer arrays of neutral atoms have been demonstrated in recent years to be a useful platform for quantum simulation, computation, and metrology. Realizing the full potential of these applications requires increasing qubit numbers while simultaneously maintaining high-fidelity control, which has proved a major challenge across quantum platforms. To date, quantum science experiments have typically been operated with at most hundreds of qubits. In this thesis, we review the relevant physics of the optical tweezer array architecture and present the technical advances involved in scaling the platform to 6,100 atomic qubits. In tandem with scalability, we demonstrate robust vacuum design, state-of-the-art coherence times, and high single-qubit gate fidelities. To capitalize on the intrinsic connectivity of the architecture at large scale, we investigate long-distance coherent atom transport and briefly describe progress towards two-qubit gate implementation. Finally, we discuss the prospects for scaling the optical tweezer array platform further by an order of magnitude.

•Jun 5, 2026•0 citations

Continuous operation of a coherent 3,000-qubit system

N.-C. Chiu, Elias C. Trapp, Jinen Guo +15 more

Neutral atoms are a promising platform for quantum science, enabling advances in areas ranging from quantum simulations 1−3 and computation 4−10 to metrology, atomic clocks 11−13 and quantum networking 14−16 . While atom losses typically limit these systems to a pulsed mode, continuous operation 17−22 could significantly enhance cycle rates, remove bottlenecks in metrology 23 , and enable deep-circuit quantum evolution through quantum error correction 24,25 . Here we demonstrate an experimental architecture for high-rate reloading and continuous operation of a large-scale atom array system while realizing coherent storage and manipulation of quantum information. Our approach utilizes a series of two optical lattice conveyor belts to transport atom reservoirs into the science region, where atoms are repeatedly extracted into optical tweezers without affecting the coherence of qubits stored nearby. Using a reloading rate of 300,000 atoms in tweezers per second, we create over 30,000 initialized qubits per second, which we leverage to assemble and maintain an array of over 3,000 atoms for more than two hours. Furthermore, we demonstrate persistent refilling of the array with atomic qubits in either a spin-polarized or a coherent superposition state while preserving the quantum state of stored qubits. Our results pave the way for realization of large-scale continuously operated atomic clocks, sensors, and fault-tolerant quantum computers.

arXiv:2506.20660•Nature•Sep 15, 2025•61 citations

Minimally Destructive Fast Imaging of Single Atoms in an Optical Tweezer Array with Coherent Excitation

Rei Yokoyama, Takumi Kashimoto, Kosuke Shibata +8 more

Ultracold neutral atoms in an optical lattice and an optical tweezer array offer highly-controllable quantum many-body systems, utilized for various quantum science and technology such as quantum computing, quantum metrology, and quantum simulation. By combining high-fidelity imaging of individual atoms, one can further enhance the capability of such experimental platforms as quantum gas microscopes, tweezer clocks, and tweezer-array-based quantum computers. In this work, we propose a minimally destructive single-atom imaging by deterministic coherent excitation of atoms with alternately applied pi-pulses from counter-propagating directions, mitigating the fundamental heating effect associated with the stochastic absorption process. Using ytterbium-174 atoms trapped in an optical tweezer array, we experimentally demonstrate fast and low-loss single-atom imaging with a discrimination fidelity of 99.89(5) % and a survival probability of 98.80(44) % in 17.6 microseconds. Importantly, our scheme exhibits the lower heating rate, about half of that of the former scheme utilizing the incoherent excitation. This fast and minimally destructive imaging scheme is beneficial for relaxing the requirement on the trap depth, thereby enabling scalable atom imaging across a wide range of quantum science platforms.

physics.atom-phCross-listedarXiv:2605.24175•May 26, 2026•0 citations

High-efficiency loading of 2,400 Ytterbium atoms in optical tweezer arrays

Jiawen Zhu, Changfeng Chen, Li Zhou +10 more

Neutral atom arrays have emerged as a powerful platform for quantum computation, simulation, and metrology.Among them, alkaline-earth-like atoms exhibit distinct advantages, including long coherence time, high-fidelity Rydberg gates, and erasure correction for efficient quantum error correction. However, their scalability has lagged behind that of the alkali atoms. Here, we report 2400 ytterbium-174 atoms trapped in an optical tweezer array with enhanced loading efficiency of 83.5(1)\% via blue-detuned light-assisted collisions. We develop a quantitative model of the collision dynamics and find good agreement between the calculated inelastic collision rates and the experimentally measured loading efficiencies.Notably, the loading efficiency is largely maintained for array sizes ranging from dozens to thousands, exhibiting excellent scalability. We further demonstrate that the enhancement exists robustly across a range of interatomic potentials, suggesting its utility for other atomic species. To establish the capability of the $^{174}$Yb arrays toward universal quantum computation, we propose to encode the qubit in the ground-clock state manifold and estimate a 99.9\% two-qubit gate fidelity with experimentally feasible parameters. Our work advances the prospects for realizing large-scale quantum computers using alkaline-earth-like atoms.

quant-pharXiv:2512.19795•Physical Review Letters•Dec 24, 2025•1 citation

Trapping 11,000 Atoms in a Tweezer Array Generated by a Single Metasurface

Yuqing Wang, Zhongchi Zhang, Tao Zhang +14 more

The scalability of physical qubit numbers is a central challenge toward a universal fault-tolerant quantum computer. The inherent scalability of atom array quantum computers stems from the identical nature of atomic qubits, so the available qubit resource is primarily limited by the number of atoms that can be trapped and controlled. Here, we robustly trap 11,000 individual atoms in a tweezer array, thereby enabling the available qubit resource to reach the tens-of-thousands scale for the first time among all quantum computation platforms. This advance is enabled by a single metasurface, approximately 2 cm in diameter, that generates the entire tweezer array without the need for microscope objectives, thereby maximizing laser-power efficiency. The large aperture ensures a working distance of about 1.5 cm, allowing the metasurface to be placed outside the vacuum cell and avoiding the technical complications of in-vacuum operation. We further characterize the randomly loaded atom array using the statistical theory of percolation phase transitions. This work takes an important first step toward a quantum computer at the 10,000-qubit scale.

quant-pharXiv:2606.02715•Jun 3, 2026•0 citations

Developing a Quantum Computing Platform Based on Single 85Rb Atoms

Janse van Rensburg, Deon Anton

Qubits encoded in the electronic states of single atoms trapped in arrays of optical tweezers are a promising platform for a universal quantum computer. These qubits can be prepared in a well-defined quantum state, coherently manipulated using a nearresonant driving field, and their state detected with high fidelity. The most promising aspect of this platform is the large scalability, with arrays of up to 6100 qubits demonstrated[62].We present our progress in developing such a system with an array of single 85Rbatoms. We provide an overview of the experimental setup constructed for this purpose. Typically 50 atoms are loaded from a MOT into a 10×10 array of optical tweezers with sub-micrometer waists, with only a single atom present in a tweezer. The occupation of the tweezers is determined using a fluorescence image. We provide a characterisation of the trapping potentials experienced by the atoms. This characterisation is performed by measuring properties of the atoms in the tweezers, allowing for an in situ characterisation. In particular, the trap depth and trap frequencies were characterised. The temperature of the atoms after the initial fluorescence image was determined using the release and recapture technique [101] and the trapping lifetime of the atom was measured. With the ability to prepare, manipulate, and read out the electronic state of the atoms, an array of hyperfine qubits has been created. The qubits are encoded in the hyperfine clock states as |0⟩ := 52S1/2 |F = 2,mF = 0⟩ and |1⟩ := 52S1/2 |F = 3,mF = 0⟩. These long-lived first-order Zeeman shift insensitive states exhibit good coherence times, which we have characterized as T1=205 ± 3 ms , T2* = 2.01 ± 0.02 ms, andT2 echo = 67.1 ± 0.1 ms. State preparation is achieved by repetitions of optical and microwave pulses, to which the |0⟩ state is dark, allowing for population to accumulate in this state. The coherent evolution of the qubits have been performed using 3.035 GHz microwave radiation. The antenna used to produce this radiation is a home-built fullwave loop antenna. The antenna has allowed for addressing the qubits with Rabi frequencies up to Ω/2π ≈ 160 kHz. We have implemented the single-qubit Clifford gates using the global microwave drive. We determine using randomized benchmarking an166 Summary average gate fidelity of 0.99949(3), limited by Rabi frequency inhomogeneity over the array. To combat this fidelity limitation, we repeated the randomized benchmarking using the pulse length error robust SCROFULOUS pulses [135], which resulted in an increased gate fidelity of 0.999653(5). As a further extension of the capabilities of the system, we demonstrated a preliminary implementation of addressing a single atom int he array by applying a local Rz rotation to the selected qubit using a Stark shifting laser. The high level of control of the microwave radiation has allowed for an experimental verification of control noise-fidelity relations proposed by [115]. We have found good agreement between the experimentally measured fidelities and the proposed analytical relations developed using the stochastic Schrödinger equation. As a preliminary step towards implementing a two-qubit gate, we have performed coherent excitation of the |1⟩ state to the |r ⟩ :=602S1/2 |mJ = −1/2> Rydberg state using an off-resonant two-photon excitation. The low contrast of the Rabi oscillations on the |1⟩↔|r ⟩ transition was investigated using a simple Lindblad master equation based model. The largest contributors to the reduced contrast is SPAM error, intermediate state scattering and laser phase noise. Since Rydberg atoms interact via the van der Waals interaction, the spacing between atoms must be deterministically controlled. For this purpose, we have used an additional optical tweezer which can be dynamically moved using an acousto-optic deflector to rearrange the stochastically filled array into a desired configuration. By placing 2 atoms a distance ≈ 5 μm apart, we have demonstrated the p2 enhancement of the Rabi oscillation on the |1⟩↔|r ⟩ transition, a required first step towards implementing an entangling gate between the hyperfine qubits. To extend the temperature-limited T2* coherence time, we have implemented Λ-enhanced gray molasses cooling. We have opted to perform this cooling on the D2line as it is experimentally convenient to use this transition. Because using this transition for this purpose has not been reported in this isotope of Rb, we studied the efficacy of this cooling scheme under these circumstances. The reduced excited state hyperfine splitting of 85Rb compared to 87Rb has allowed for the study of the efficacy of this technique in the presence of additional transitions that may inhibit the cooling performance. Despite the challenges of the smaller hyperfine splitting, we have cooled the atoms to4.0±0.2 μK. This additional cooling is partially negated by the heating from the qubit state preparation procedure, but the additional cooling has allowed for the average T2*to be extended from ⟨T2*⟩ = 3.4 ± 0.1 ms to ⟨T2*⟩ = 5.3 ± 0.2 ms.

•Oct 28, 2025•0 citations
Optical tweezer arrays 1,2 have transformed atomic and molecular physics, now forming the backbone for a range of leading experiments in quantum computing 3–8 , simulation 1,9–12 , and metrology 13–15 . Typical experiments trap tens to hundreds of atomic qubits, and recently systems with around one thousand atoms were realized without defining qubits or demonstrating coherent control 16–18 . However, scaling to thousands of atomic qubits with long coherence times, low-loss, and high-fidelity imaging is an outstanding challenge and critical for progress in quantum science, particularly towards quantum error correction 19,20 . Here, we experimentally realize an array of optical tweezers trapping over 6,100 neutral atoms in around 12,000 sites, simultaneously surpassing state-of-the-art performance for several metrics that underpin the success of the platform. Specifically, while scaling to such a large number of atoms, we demonstrate a coherence time of 12.6(1) seconds, a record for hyperfine qubits in an optical tweezer array. We show room-temperature trapping lifetimes of ~ 23 minutes, enabling record-high imaging survival of 99.98952(1)% with an imaging fidelity of over 99.99%. We present a plan for zone-based quantum computing 5,21 and demonstrate necessary coherence-preserving qubit transport and pick-up/drop-off operations on large spatial scales, characterized through interleaved randomized benchmarking. Our results, along with recent developments 8,22–24 , indicate that universal quantum computing and quantum error correction with thousands to tens of thousands of physical qubits could be a near-term prospect.
Optical tweezer arrays of neutral atoms have been demonstrated in recent years to be a useful platform for quantum simulation, computation, and metrology. Realizing the full potential of these applications requires increasing qubit numbers while simultaneously maintaining high-fidelity control, which has proved a major challenge across quantum platforms. To date, quantum science experiments have typically been operated with at most hundreds of qubits. In this thesis, we review the relevant physics of the optical tweezer array architecture and present the technical advances involved in scaling the platform to 6,100 atomic qubits. In tandem with scalability, we demonstrate robust vacuum design, state-of-the-art coherence times, and high single-qubit gate fidelities. To capitalize on the intrinsic connectivity of the architecture at large scale, we investigate long-distance coherent atom transport and briefly describe progress towards two-qubit gate implementation. Finally, we discuss the prospects for scaling the optical tweezer array platform further by an order of magnitude.
Neutral atoms are a promising platform for quantum science, enabling advances in areas ranging from quantum simulations 1−3 and computation 4−10 to metrology, atomic clocks 11−13 and quantum networking 14−16 . While atom losses typically limit these systems to a pulsed mode, continuous operation 17−22 could significantly enhance cycle rates, remove bottlenecks in metrology 23 , and enable deep-circuit quantum evolution through quantum error correction 24,25 . Here we demonstrate an experimental architecture for high-rate reloading and continuous operation of a large-scale atom array system while realizing coherent storage and manipulation of quantum information. Our approach utilizes a series of two optical lattice conveyor belts to transport atom reservoirs into the science region, where atoms are repeatedly extracted into optical tweezers without affecting the coherence of qubits stored nearby. Using a reloading rate of 300,000 atoms in tweezers per second, we create over 30,000 initialized qubits per second, which we leverage to assemble and maintain an array of over 3,000 atoms for more than two hours. Furthermore, we demonstrate persistent refilling of the array with atomic qubits in either a spin-polarized or a coherent superposition state while preserving the quantum state of stored qubits. Our results pave the way for realization of large-scale continuously operated atomic clocks, sensors, and fault-tolerant quantum computers.
Ultracold neutral atoms in an optical lattice and an optical tweezer array offer highly-controllable quantum many-body systems, utilized for various quantum science and technology such as quantum computing, quantum metrology, and quantum simulation. By combining high-fidelity imaging of individual atoms, one can further enhance the capability of such experimental platforms as quantum gas microscopes, tweezer clocks, and tweezer-array-based quantum computers. In this work, we propose a minimally destructive single-atom imaging by deterministic coherent excitation of atoms with alternately applied pi-pulses from counter-propagating directions, mitigating the fundamental heating effect associated with the stochastic absorption process. Using ytterbium-174 atoms trapped in an optical tweezer array, we experimentally demonstrate fast and low-loss single-atom imaging with a discrimination fidelity of 99.89(5) % and a survival probability of 98.80(44) % in 17.6 microseconds. Importantly, our scheme exhibits the lower heating rate, about half of that of the former scheme utilizing the incoherent excitation. This fast and minimally destructive imaging scheme is beneficial for relaxing the requirement on the trap depth, thereby enabling scalable atom imaging across a wide range of quantum science platforms.
Neutral atom arrays have emerged as a powerful platform for quantum computation, simulation, and metrology.Among them, alkaline-earth-like atoms exhibit distinct advantages, including long coherence time, high-fidelity Rydberg gates, and erasure correction for efficient quantum error correction. However, their scalability has lagged behind that of the alkali atoms. Here, we report 2400 ytterbium-174 atoms trapped in an optical tweezer array with enhanced loading efficiency of 83.5(1)\% via blue-detuned light-assisted collisions. We develop a quantitative model of the collision dynamics and find good agreement between the calculated inelastic collision rates and the experimentally measured loading efficiencies.Notably, the loading efficiency is largely maintained for array sizes ranging from dozens to thousands, exhibiting excellent scalability. We further demonstrate that the enhancement exists robustly across a range of interatomic potentials, suggesting its utility for other atomic species. To establish the capability of the 174^{174}174Yb arrays toward universal quantum computation, we propose to encode the qubit in the ground-clock state manifold and estimate a 99.9\% two-qubit gate fidelity with experimentally feasible parameters. Our work advances the prospects for realizing large-scale quantum computers using alkaline-earth-like atoms.
The scalability of physical qubit numbers is a central challenge toward a universal fault-tolerant quantum computer. The inherent scalability of atom array quantum computers stems from the identical nature of atomic qubits, so the available qubit resource is primarily limited by the number of atoms that can be trapped and controlled. Here, we robustly trap 11,000 individual atoms in a tweezer array, thereby enabling the available qubit resource to reach the tens-of-thousands scale for the first time among all quantum computation platforms. This advance is enabled by a single metasurface, approximately 2 cm in diameter, that generates the entire tweezer array without the need for microscope objectives, thereby maximizing laser-power efficiency. The large aperture ensures a working distance of about 1.5 cm, allowing the metasurface to be placed outside the vacuum cell and avoiding the technical complications of in-vacuum operation. We further characterize the randomly loaded atom array using the statistical theory of percolation phase transitions. This work takes an important first step toward a quantum computer at the 10,000-qubit scale.
Qubits encoded in the electronic states of single atoms trapped in arrays of optical tweezers are a promising platform for a universal quantum computer. These qubits can be prepared in a well-defined quantum state, coherently manipulated using a nearresonant driving field, and their state detected with high fidelity. The most promising aspect of this platform is the large scalability, with arrays of up to 6100 qubits demonstrated[62].We present our progress in developing such a system with an array of single 85Rbatoms. We provide an overview of the experimental setup constructed for this purpose. Typically 50 atoms are loaded from a MOT into a 10×10 array of optical tweezers with sub-micrometer waists, with only a single atom present in a tweezer. The occupation of the tweezers is determined using a fluorescence image. We provide a characterisation of the trapping potentials experienced by the atoms. This characterisation is performed by measuring properties of the atoms in the tweezers, allowing for an in situ characterisation. In particular, the trap depth and trap frequencies were characterised. The temperature of the atoms after the initial fluorescence image was determined using the release and recapture technique [101] and the trapping lifetime of the atom was measured. With the ability to prepare, manipulate, and read out the electronic state of the atoms, an array of hyperfine qubits has been created. The qubits are encoded in the hyperfine clock states as |0⟩ := 52S1/2 |F = 2,mF = 0⟩ and |1⟩ := 52S1/2 |F = 3,mF = 0⟩. These long-lived first-order Zeeman shift insensitive states exhibit good coherence times, which we have characterized as T1=205 ± 3 ms , T2* = 2.01 ± 0.02 ms, andT2 echo = 67.1 ± 0.1 ms. State preparation is achieved by repetitions of optical and microwave pulses, to which the |0⟩ state is dark, allowing for population to accumulate in this state. The coherent evolution of the qubits have been performed using 3.035 GHz microwave radiation. The antenna used to produce this radiation is a home-built fullwave loop antenna. The antenna has allowed for addressing the qubits with Rabi frequencies up to Ω/2π ≈ 160 kHz. We have implemented the single-qubit Clifford gates using the global microwave drive. We determine using randomized benchmarking an166 Summary average gate fidelity of 0.99949(3), limited by Rabi frequency inhomogeneity over the array. To combat this fidelity limitation, we repeated the randomized benchmarking using the pulse length error robust SCROFULOUS pulses [135], which resulted in an increased gate fidelity of 0.999653(5). As a further extension of the capabilities of the system, we demonstrated a preliminary implementation of addressing a single atom int he array by applying a local Rz rotation to the selected qubit using a Stark shifting laser. The high level of control of the microwave radiation has allowed for an experimental verification of control noise-fidelity relations proposed by [115]. We have found good agreement between the experimentally measured fidelities and the proposed analytical relations developed using the stochastic Schrödinger equation. As a preliminary step towards implementing a two-qubit gate, we have performed coherent excitation of the |1⟩ state to the |r ⟩ :=602S1/2 |mJ = −1/2> Rydberg state using an off-resonant two-photon excitation. The low contrast of the Rabi oscillations on the |1⟩↔|r ⟩ transition was investigated using a simple Lindblad master equation based model. The largest contributors to the reduced contrast is SPAM error, intermediate state scattering and laser phase noise. Since Rydberg atoms interact via the van der Waals interaction, the spacing between atoms must be deterministically controlled. For this purpose, we have used an additional optical tweezer which can be dynamically moved using an acousto-optic deflector to rearrange the stochastically filled array into a desired configuration. By placing 2 atoms a distance ≈ 5 μm apart, we have demonstrated the p2 enhancement of the Rabi oscillation on the |1⟩↔|r ⟩ transition, a required first step towards implementing an entangling gate between the hyperfine qubits. To extend the temperature-limited T2* coherence time, we have implemented Λ-enhanced gray molasses cooling. We have opted to perform this cooling on the D2line as it is experimentally convenient to use this transition. Because using this transition for this purpose has not been reported in this isotope of Rb, we studied the efficacy of this cooling scheme under these circumstances. The reduced excited state hyperfine splitting of 85Rb compared to 87Rb has allowed for the study of the efficacy of this technique in the presence of additional transitions that may inhibit the cooling performance. Despite the challenges of the smaller hyperfine splitting, we have cooled the atoms to4.0±0.2 μK. This additional cooling is partially negated by the heating from the qubit state preparation procedure, but the additional cooling has allowed for the average T2*to be extended from ⟨T2*⟩ = 3.4 ± 0.1 ms to ⟨T2*⟩ = 5.3 ± 0.2 ms.