Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.14080 · Physical review. B./Physical review. B

Dual Shapiro steps and fundamental transconductance in dc driven Bloch transistor

A. B. Zorin

cond-mat.supr-conquant-phSubmitted May 13, 2026• Announced May 15, 2026• 0 citations
v1 · May 13, 2026v2 · Sep 14, 2026
arXivHTMLPDF

Abstract

We propose a superconducting circuit based on the Bloch transistor, a quantum device consisting of two small-capacitance Josephson junctions connected in series and having a small island in between. This device is driven by two dc electrical sources controlling Josephson oscillations of frequency $f_J = 2e\overline{V_J}/h$, related to the average voltage $\overline{V_J}$ on the transistor, and Bloch oscillations of frequency $f_B = \overline{I_B}/2e$, related to the average current $\overline{I_B}$ injected into the transistor island. Due to the Bloch transistor properties, these two types of oscillations can mutually phase lock, i.e., $f_J = f_B$. This leads to formation of current steps on the current-voltage curve at $\overline{I}_B = 2ef_J$, which are similar to the dual Shapiro steps appearing at current $\overline{I}=2ef$ under microwave irradiation of frequency $f$. Moreover, transconductance $\overline{I_B}/\overline{V_J}$ takes the fundamental value of $1/R_Q$, where $R_Q = h/4e^2$ is the resistance quantum. The obtained results pave the way to the alternative quantum standard of resistance, based on the superconducting circuit and operating without applying strong magnetic field.

Journal reference
Phys. Rev. B, vol. 114, 134510 (2026)
DOI
10.1103/pfyb-pdk9

Related papers

Quantized currents at 2ef - studying the potential of dual Shapiro steps for a quantum current standard

Lukas Grünhaupt, Fabian Kaap, S. V. Lotkhov

Electrical quantum metrology using superconducting circuits relies on phase synchronization effects of Josephson oscillations with ac signals, resulting in equidistant voltage steps and forming the basis of today’s voltage standards. Because charge and phase are conjugate variables, the dual effect of equidistant current steps should also exist and was indeed predicted theoretically. It relies on so-called Bloch oscillations, which are oscillations of voltage occurring when a current-biased Josephson junction is embedded in an environment with characteristic impedance larger than the superconducting resistance quantum h/4e^2. In addition, Josephson junctions of lateral size on the order of tens of nm are necessary, such that their Josephson and charging energy are approximately equal. Synchronizing such Bloch-oscillations with an ac signal completes the duality with Shapiro steps, and results in the occurrence of steps in IV-measurements at I=2ef with e being the elementary charge, and f the frequency of the external ac signal. To emphasize the duality with Shapiro (voltage) steps, such current steps are called dual-Shapiro steps. Together with the established standards for voltage and resistance, a new standard for current based on dual-Shapiro steps would relate the ampere, volt and ohm through fundamental constants and frequency. If successfully realized with metrological precision this would close the quantum metrological triangle and might even enable the combination of all three electric quantum relations in one single device. Here we show our efforts towards the realization of quantized currents with metrological applicability. Based on advances in fabrication technology and measurement capabilities, we demonstrate quantized current steps up to I≈2 nA by synchronizing Bloch oscillations with external ac signals up to 6 GHz [1,2]. In addition, we demonstrate a pulsed driving scheme resulting in an asymmetric pattern of dual-Shapiro steps featuring increased differential resistance [2]. Finally, we discuss the effects limiting the precision of our quantized current steps and present our efforts for tackling them. [1] F. Kaap et al., “Synchronization of Bloch Oscillations in a Strongly Coupled Pair of Small Josephson Junctions: Evidence for a Shapiro-like Current Step,“ Phys. Rev. Lett. 132, 027001, 2024. [2] F. Kaap et al., “Demonstration of dual Shapiro steps in small Josephson junctions,“ Nature Communications 15, 8726, 2024.

•Jan 1, 2025•0 citations

Demonstration of dual Shapiro steps in small Josephson junctions

Fabian Kaap, Christoph Kissling, Victor Gaydamachenko +2 more

Abstract Bloch oscillations in small Josephson junctions were predicted theoretically as the quantum dual to Josephson oscillations. A significant consequence of this prediction is the emergence of quantized current steps, so-called dual Shapiro steps, when synchronizing Bloch oscillations to an external microwave signal. These steps potentially enable a fundamental standard of current I, defined via the frequency f of the external signal and the elementary charge e, I = ± n × 2ef, where n is a natural number. Here, we realize this fundamental relation by synchronizing the Bloch oscillations in small Al/AlOx/Al Josephson junctions to sinusoidal drives with frequencies from 1 to 6 GHz and observe dual Shapiro steps up to I ≈ 3 nA. Inspired by today’s voltage standards and to further confirm the duality relation, we investigate a pulsed drive regime and observe an asymmetric pattern of dual Shapiro steps. This work confirms quantum duality effects in Josephson junctions and paves the way towards a range of applications in quantum metrology based on well-established fabrication techniques and straightforward circuit design.

arXiv:2401.06599•Nature Communications•Oct 9, 2024•14 citations

Harnessing synchronization in superconducting electronics

David Scheer

A resistively shunted Josephson junction with a DC-bias exhibits Josephson oscillations that link voltage and frequency through fundamental constants. These oscillations can synchronize their frequency to an external microwave signal achieving the metrological precision that underlies the modern Josephson voltage standard. Its electromagnetic dual, the phase-slip junction, exhibits Bloch oscillations that connect current to frequency in an analogous way. A current standard based on synchronized Bloch oscillations could close the quantum metrology triangle, providing a consistent test of the underlying fundamental relations between voltage, current, and resistance. The experimental realization, however, remains challenging, as external microwave lines introduce parasitic capacitances that can destroy the high-impedance environment required for Bloch oscillations. This work explores the use of on-chip synchronization to stabilize both Josephson and Bloch oscillations without the need for an external microwave drive. We review the theoretical framework of the synchronization between two coupled oscillators and the dynamics of superconducting circuits with a focus on quantum metrology. Building on this, we analyze a recent experiment on the mutual synchronization of Bloch oscillations in a pair of ultrasmall Josephson junctions. Our model in terms of correlated phase-slip junctions realized in the ground state of the device shows good agreement with the experimental results, confirming synchronized Bloch oscillations. At larger currents, nonadiabatic transitions wash out the coherence of the Bloch oscillations and therefore the synchronization features. Motivated by these findings, we propose an alternative circuit setup where the Bloch oscillations in a single phase-slip junction are stabilized by synchronization to on-chip Josephson oscillations. We study the back-action of the Bloch oscillations on the Josephson oscillations and identify a parameter regime in which it is minimized, rendering the latter an effectively rigid driving signal. Moreover, we find that the small remaining back-action further enhances the thermal stability of the synchronized Bloch oscillations compared to the externally driven case. Without a back-action mechanism, the coherence of Josephson oscillations is severely limited by thermal fluctuations. We relate this limitation to the thermodynamic uncertainty relation (TUR) in the field of stochastic thermodynamics. Recent findings show, that the TUR can be broken by a classical pendulum clock. We propose a circuit that mimics the dynamics of a pendulum clock as a flexible on-chip microwave source for high impedance environments. Due to an internal synchronization, the clock circuit emits coherent radiation beyond the limits of the TUR. Finally, we explore the use of symmetry breaking drives as a resource for nonreciprocal transport in superconducting circuits. We demonstrate that a biharmonic microwave signal applied to a conventional Josephson junction induces an ideal supercurrent diode effect with a tunable direction.

•Jan 1, 2026•0 citations

The microwave phase locking in Bloch transistor

Ilya Antonov, Rais S. Shaikhaidarov, Kyung Ho Kim +5 more

Recent experimental demonstration of the quantum coherent phase slip and current quantization in the superconductors, the fundamental phenomena dual to the coherent Cooper pair tunneling and voltage quantization (Shapiro steps), enables the development of a new quantum device, the Bloch transistor (BT). BT has a unique functionality: it can deliver quantized non-dissipative current to the quantum circuit. BT consists of two coupled Josephson Junctions (JJ) in the regime of coherent quantum phase slip. At the heart of the BT operation is a new mechanism for phase-locking the Bloch oscillations in JJs to microwaves via induced charge. The charge phase locking allows not only quantization of current but also gate voltage control of this quantization through the Aharonov-Casher effect. We study the operation of the BT and analyze its parameters. BT technology is scalable and compatible with other superconducting quantum devices, making it part of an emerging cryogenic quantum technology platform.

arXiv:2504.08692•Nature Communications•Feb 2, 2026•4 citations

Quantum theory of Bloch oscillations in a resistively shunted transmon

Vladislav D. Kurilovich, Benjamin Remez, L. I. Glazman

A transmon qubit embedded in a high-impedance environment acts in a way dual to a conventional Josephson junction. In analogy to the AC Josephson effect, biasing of the transmon by a direct current leads to the oscillations of voltage across it. These oscillations are known as the Bloch oscillations. We find the Bloch oscillations spectrum, and show that the zero-point fluctuations of charge make it broadband. Despite having a broad-band spectrum, Bloch oscillations can be brought in resonance with an external microwave radiation. The resonances lead to steps in the voltage-current relation, which are dual to the conventional Shapiro steps. We find how the shape of the steps depends on the environment impedance R, parameters of the transmon, and the microwave amplitude. The Bloch oscillations rely on the insulating state of the transmon which is realized at impedances exceeding the Schmid transition point, R > RQ = h/(2e)2. When a Josephson junction is embedded into a highly-resistive environment, it loses its superconducting properties and starts to behave as an insulator. This results in voltage oscillations across the current-biased junction - the Bloch oscillations. Here the authors develop a fully quantum theory of this effect.

arXiv:2403.04624•Nature Communications•Feb 5, 2025•6 citations

Model analysis for a current-step-like structure in a high Tc Josephson device coupled to a microwave signal

Yoshinao Mizugaki, Jian Chen

High Tc Josephson junctions have IcRn products as large as a few mV at liquid helium temperature, and hence, the frequency normalized by IcRn∕Φ0 becomes on the order of 10−3 for a gigahertz (GHz) microwave signal. (Here, Ic, Rn, and Φ0 are the critical current, the normal resistance, and a flux quantum, respectively.) It is well known that a microwave-current-driven Josephson junction does not exhibit clear Shapiro steps under such low frequency conditions. Instead of Shapiro steps, however, we often observe a current-step-like structure in the current–voltage curve of YBa2Cu3O7−δ grain boundary Josephson junctions coupled to a GHz signal. In this article, we present a model analysis for such current-step-like structures. Two types of device models are employed: a simple resistively and capacitively shunted junction model and a rf-field-driven two-junction superconducting quantum interference device model. Numerical results of the latter model agree with the experimental results, which indicates that the envelope of small Shapiro steps, including the effects of microwave-induced motion of flux quanta, appears as a current-step-like structure in a high Tc Josephson device coupled to a GHz microwave.

Journal of Applied Physics•Mar 8, 2005•3 citations
We propose a superconducting circuit based on the Bloch transistor, a quantum device consisting of two small-capacitance Josephson junctions connected in series and having a small island in between. This device is driven by two dc electrical sources controlling Josephson oscillations of frequency fJ=2eVJ‾/hf_J = 2e\overline{V_J}/hfJ​=2eVJ​​/h, related to the average voltage VJ‾\overline{V_J}VJ​​ on the transistor, and Bloch oscillations of frequency fB=IB‾/2ef_B = \overline{I_B}/2efB​=IB​​/2e, related to the average current IB‾\overline{I_B}IB​​ injected into the transistor island. Due to the Bloch transistor properties, these two types of oscillations can mutually phase lock, i.e., fJ=fBf_J = f_BfJ​=fB​. This leads to formation of current steps on the current-voltage curve at I‾B=2efJ\overline{I}_B = 2ef_JIB​=2efJ​, which are similar to the dual Shapiro steps appearing at current I‾=2ef\overline{I}=2efI=2ef under microwave irradiation of frequency fff. Moreover, transconductance IB‾/VJ‾\overline{I_B}/\overline{V_J}IB​​/VJ​​ takes the fundamental value of 1/RQ1/R_Q1/RQ​, where RQ=h/4e2R_Q = h/4e^2RQ​=h/4e2 is the resistance quantum. The obtained results pave the way to the alternative quantum standard of resistance, based on the superconducting circuit and operating without applying strong magnetic field.
Electrical quantum metrology using superconducting circuits relies on phase synchronization effects of Josephson oscillations with ac signals, resulting in equidistant voltage steps and forming the basis of today’s voltage standards. Because charge and phase are conjugate variables, the dual effect of equidistant current steps should also exist and was indeed predicted theoretically. It relies on so-called Bloch oscillations, which are oscillations of voltage occurring when a current-biased Josephson junction is embedded in an environment with characteristic impedance larger than the superconducting resistance quantum h/4e^2. In addition, Josephson junctions of lateral size on the order of tens of nm are necessary, such that their Josephson and charging energy are approximately equal. Synchronizing such Bloch-oscillations with an ac signal completes the duality with Shapiro steps, and results in the occurrence of steps in IV-measurements at I=2ef with e being the elementary charge, and f the frequency of the external ac signal. To emphasize the duality with Shapiro (voltage) steps, such current steps are called dual-Shapiro steps. Together with the established standards for voltage and resistance, a new standard for current based on dual-Shapiro steps would relate the ampere, volt and ohm through fundamental constants and frequency. If successfully realized with metrological precision this would close the quantum metrological triangle and might even enable the combination of all three electric quantum relations in one single device. Here we show our efforts towards the realization of quantized currents with metrological applicability. Based on advances in fabrication technology and measurement capabilities, we demonstrate quantized current steps up to I≈2 nA by synchronizing Bloch oscillations with external ac signals up to 6 GHz [1,2]. In addition, we demonstrate a pulsed driving scheme resulting in an asymmetric pattern of dual-Shapiro steps featuring increased differential resistance [2]. Finally, we discuss the effects limiting the precision of our quantized current steps and present our efforts for tackling them. [1] F. Kaap et al., “Synchronization of Bloch Oscillations in a Strongly Coupled Pair of Small Josephson Junctions: Evidence for a Shapiro-like Current Step,“ Phys. Rev. Lett. 132, 027001, 2024. [2] F. Kaap et al., “Demonstration of dual Shapiro steps in small Josephson junctions,“ Nature Communications 15, 8726, 2024.
Abstract Bloch oscillations in small Josephson junctions were predicted theoretically as the quantum dual to Josephson oscillations. A significant consequence of this prediction is the emergence of quantized current steps, so-called dual Shapiro steps, when synchronizing Bloch oscillations to an external microwave signal. These steps potentially enable a fundamental standard of current I, defined via the frequency f of the external signal and the elementary charge e, I = ± n × 2ef, where n is a natural number. Here, we realize this fundamental relation by synchronizing the Bloch oscillations in small Al/AlOx/Al Josephson junctions to sinusoidal drives with frequencies from 1 to 6 GHz and observe dual Shapiro steps up to I ≈ 3 nA. Inspired by today’s voltage standards and to further confirm the duality relation, we investigate a pulsed drive regime and observe an asymmetric pattern of dual Shapiro steps. This work confirms quantum duality effects in Josephson junctions and paves the way towards a range of applications in quantum metrology based on well-established fabrication techniques and straightforward circuit design.
A resistively shunted Josephson junction with a DC-bias exhibits Josephson oscillations that link voltage and frequency through fundamental constants. These oscillations can synchronize their frequency to an external microwave signal achieving the metrological precision that underlies the modern Josephson voltage standard. Its electromagnetic dual, the phase-slip junction, exhibits Bloch oscillations that connect current to frequency in an analogous way. A current standard based on synchronized Bloch oscillations could close the quantum metrology triangle, providing a consistent test of the underlying fundamental relations between voltage, current, and resistance. The experimental realization, however, remains challenging, as external microwave lines introduce parasitic capacitances that can destroy the high-impedance environment required for Bloch oscillations. This work explores the use of on-chip synchronization to stabilize both Josephson and Bloch oscillations without the need for an external microwave drive. We review the theoretical framework of the synchronization between two coupled oscillators and the dynamics of superconducting circuits with a focus on quantum metrology. Building on this, we analyze a recent experiment on the mutual synchronization of Bloch oscillations in a pair of ultrasmall Josephson junctions. Our model in terms of correlated phase-slip junctions realized in the ground state of the device shows good agreement with the experimental results, confirming synchronized Bloch oscillations. At larger currents, nonadiabatic transitions wash out the coherence of the Bloch oscillations and therefore the synchronization features. Motivated by these findings, we propose an alternative circuit setup where the Bloch oscillations in a single phase-slip junction are stabilized by synchronization to on-chip Josephson oscillations. We study the back-action of the Bloch oscillations on the Josephson oscillations and identify a parameter regime in which it is minimized, rendering the latter an effectively rigid driving signal. Moreover, we find that the small remaining back-action further enhances the thermal stability of the synchronized Bloch oscillations compared to the externally driven case. Without a back-action mechanism, the coherence of Josephson oscillations is severely limited by thermal fluctuations. We relate this limitation to the thermodynamic uncertainty relation (TUR) in the field of stochastic thermodynamics. Recent findings show, that the TUR can be broken by a classical pendulum clock. We propose a circuit that mimics the dynamics of a pendulum clock as a flexible on-chip microwave source for high impedance environments. Due to an internal synchronization, the clock circuit emits coherent radiation beyond the limits of the TUR. Finally, we explore the use of symmetry breaking drives as a resource for nonreciprocal transport in superconducting circuits. We demonstrate that a biharmonic microwave signal applied to a conventional Josephson junction induces an ideal supercurrent diode effect with a tunable direction.
Recent experimental demonstration of the quantum coherent phase slip and current quantization in the superconductors, the fundamental phenomena dual to the coherent Cooper pair tunneling and voltage quantization (Shapiro steps), enables the development of a new quantum device, the Bloch transistor (BT). BT has a unique functionality: it can deliver quantized non-dissipative current to the quantum circuit. BT consists of two coupled Josephson Junctions (JJ) in the regime of coherent quantum phase slip. At the heart of the BT operation is a new mechanism for phase-locking the Bloch oscillations in JJs to microwaves via induced charge. The charge phase locking allows not only quantization of current but also gate voltage control of this quantization through the Aharonov-Casher effect. We study the operation of the BT and analyze its parameters. BT technology is scalable and compatible with other superconducting quantum devices, making it part of an emerging cryogenic quantum technology platform.
A transmon qubit embedded in a high-impedance environment acts in a way dual to a conventional Josephson junction. In analogy to the AC Josephson effect, biasing of the transmon by a direct current leads to the oscillations of voltage across it. These oscillations are known as the Bloch oscillations. We find the Bloch oscillations spectrum, and show that the zero-point fluctuations of charge make it broadband. Despite having a broad-band spectrum, Bloch oscillations can be brought in resonance with an external microwave radiation. The resonances lead to steps in the voltage-current relation, which are dual to the conventional Shapiro steps. We find how the shape of the steps depends on the environment impedance R, parameters of the transmon, and the microwave amplitude. The Bloch oscillations rely on the insulating state of the transmon which is realized at impedances exceeding the Schmid transition point, R > RQ = h/(2e)2. When a Josephson junction is embedded into a highly-resistive environment, it loses its superconducting properties and starts to behave as an insulator. This results in voltage oscillations across the current-biased junction - the Bloch oscillations. Here the authors develop a fully quantum theory of this effect.
High Tc Josephson junctions have IcRn products as large as a few mV at liquid helium temperature, and hence, the frequency normalized by IcRn∕Φ0 becomes on the order of 10−3 for a gigahertz (GHz) microwave signal. (Here, Ic, Rn, and Φ0 are the critical current, the normal resistance, and a flux quantum, respectively.) It is well known that a microwave-current-driven Josephson junction does not exhibit clear Shapiro steps under such low frequency conditions. Instead of Shapiro steps, however, we often observe a current-step-like structure in the current–voltage curve of YBa2Cu3O7−δ grain boundary Josephson junctions coupled to a GHz signal. In this article, we present a model analysis for such current-step-like structures. Two types of device models are employed: a simple resistively and capacitively shunted junction model and a rf-field-driven two-junction superconducting quantum interference device model. Numerical results of the latter model agree with the experimental results, which indicates that the envelope of small Shapiro steps, including the effects of microwave-induced motion of flux quanta, appears as a current-step-like structure in a high Tc Josephson device coupled to a GHz microwave.