Electro-optic modulation is central to classical optical communications and emerging quantum technologies. High-confinement optomechanical crystal modulators enable microwave-optical transduction through strong optomechanical interactions and offer a promising interface between superconducting qubits and optical fibers. However, their performance is limited by thermal noise from optical absorption. Release-free optomechanical crystals provide improved thermal anchoring but have not yet been integrated into a microwave-optical transducer. Here, we demonstrate a release-free electro-optomechanical transducer combining strong optomechanical interactions in silicon with the efficient piezoelectricity of lithium niobate via micro-transfer printing. We observe electro- and optomechanical coupling rates compatible with quantum-level operation when co-integrated with a superconducting microwave circuit. This advance moves release-free electro-optomechanical devices toward practical microwave-optical interfaces.
Journal reference
Optics Letters Vol. 51, Issue 14, pp. 3886-3889 (2026)
Electro-optic modulation is central to classical optical communications and emerging quantum technologies. High-confinement optomechanical crystal modulators enable microwave-optical transduction through strong optomechanical interactions and offer a promising interface between superconducting qubits and optical fibers. However, their performance is limited by thermal noise from optical absorption. Release-free optomechanical crystals provide improved thermal anchoring but have not yet been integrated into a microwave-optical transducer. Here, we demonstrate a release-free electro-optomechanical transducer combining strong optomechanical interactions in silicon with the efficient piezoelectricity of lithium niobate via micro-transfer printing. We observe electro- and optomechanical coupling rates compatible with quantum-level operation when co-integrated with a superconducting microwave circuit. This advance moves release-free electro-optomechanical devices toward practical microwave-optical interfaces.
Quantum transduction between microwave and optical photons offers the potential to merge the long-range connectivity of optical photons with the deterministic quantum operations of superconducting microwave qubits. A promising approach to achieving this uses an intermediary mechanical mode along with piezo-optomechanical interactions. Traditionally, these transducers are suspended to confine mechanical fields, but this complicates manufacturing and comes with the major challenge of poor thermal anchoring and a trade-off between noise and efficiency. To overcome these issues, we introduce the—to our knowledge—first design of a release-free electro-optomechanical quantum transducer. Our release-free, i.e., non-suspended, design leverages a silicon-on-sapphire platform. It combines release-free lithium niobate electromechanical crystals with silicon optomechanical crystals on a sapphire substrate, optimizing thermal anchoring and microwave and mechanical coherence. Despite departing from the traditional suspended transducer paradigm, our release-free design achieves coupling rates sufficient for quantum-level interactions between microwave photons, phonons, and optical photons. Unconventionally, it utilizes high-wavevector mechanical modes tightly confined to the chip surface. Beyond quantum science and engineering, this platform and its design principles could also propel low-power acousto-optic systems in integrated photonics.
Noise is an ever-present reality of the world we live in. From the non-deterministic movement of matter to the fluctuations of the physical fields surrounding us, noise is the ultimate adversary of all things pure. Noise limits the fidelity of information transfer, particularly for quantum signals relying on coherence. Yet at sufficiently low temperatures, ambient thermal noise is suppressed to a level where even quantum signals can maintain coherence, making them available for technological applications. Modern cryogenic technologies enable access to environmental temperatures of 10 mK, allowing quantum-coherent transfer and processing of signals with carrier frequencies in the GHz range.A technology that operates in this regime is the optomechanical crystal: a nanofabricated device that supports high-quality resonances for both optical and acoustic fields and enables coherent coupling between the two. Through the optomechanical interaction, the acoustic mode can serve as a universal bus for the optical field, coherently linking it to other nonlinear systems, such as superconducting qubits – thereby enabling quantum microwave-to-optical transduction. As with many quantum systems, however, device performance is constrained by excess noise. In optomechanical crystals, this noise primarily stems from optical absorption combined with insufficient thermal anchoring. Achieving robust quantum-level operation in future devices therefore requires a detailed understanding and careful mitigation of these noise mechanisms.This thesis makes progress toward overcoming optical-absorption-induced noise in optomechanical crystals by (I) introducing a new class of optomechanical devices with superior thermal anchoring: the release-free optomechanical crystal; and (II) carefully investigating its noise performance and potential for microwave-to-optical transduction. The results presented in this thesis contribute to the understanding of noise limits in silicon optomechanical crystals and showcase the release-free platform as a viable alternative for on-chip, low-noise optomechanics.
Interactions between light and mechanics provide a powerful interface between optical and microwave-frequency signals, with applications spanning classical signal processing and quantum technologies. High-performance optomechanical devices require both strong photon-phonon coupling and tolerance to parasitic laser heating. Release-free optomechanical crystals provide improved thermal anchoring compared to suspended nanobeams, but have so far exhibited weaker vacuum optomechanical coupling rates, leaving a trade-off between coupling strength and thermal robustness. Here, we largely close this gap: we design and experimentally demonstrate a release-free silicon optomechanical crystal with a record vacuum optomechanical coupling rate of about gOM/(2π)=800 kHz, comparable to suspended state-of-the-art devices. The resulting optomechanical scattering rate ΓOM/(2π)=1.1 kHz is nearly twice that of previous release-free implementations. This performance is achieved by combining physics-guided human intuition with a multiphysics inverse-design algorithm introduced here for resonant optomechanical structures. Beyond the specific device demonstrated, the inverse-design framework is applicable to co-optimizing optical and mechanical resonances and eigenmodes more broadly. These results strengthen release-free optomechanical crystals as a platform for fast, low-noise classical and quantum optomechanics.
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.
Quantum computing is one of the great scientific challenges of the 21st century. Small-scale systems today promise to surpass classical computers in the coming years and to enable the solution of classically intractable computational tasks in the fields of quantum chemistry, optimization, cryptography and more. In contrast to classical computers, quantum computers based on superconducting quantum bits (qubits) can to date not be linked over long distance in a network to improve their computing capacity, since devices, which preserve the quantumstate when it is transferred from one machine to another, are not available. Several approaches are being pursued to realize such a component, one of themost promising to date makes use of an intermediary, micromechanical element that enables quantum coherent conversion between the information present in the quantum computer and an optical fiber, without compromising the quantum nature of the information, via optomechanical interaction. This approach could allow fiber-optic quantum networks between separate quantum computers based on superconducting qubits in the future. In this work a platformfor such a microwave-to-optic link was developed based on the piezoelectric material gallium phosphide. This III-V semiconductor offers not only a piezoelectric coupling between the electric field of a microwave circuit and a mechanicalmode, but also a wide optical bandgap E_g = 2.26eV which reduces nonlinear optical absorption in the device and a large refractive index n(1550nm) = 3.01 which allows strong optical confinement at near-infrared wavelengths. Importantly and in contrast to other approaches with gallium phosphide, an epitaxially grown, single crystal thin film of the material is integrated directly on a silicon wafer with pre-structured niobium electrodes by direct wafer-bonding. This opens up the possibility of integrating the device design presented here directly with superconducting qubits fabricated with this material system. A microwave-to-optical transducer design was simulated and fabricated in the galliumphosphideon- silicon platform. The device was found to exhibit large vacuum optomechanical coupling rates g0/2 pi ~ 290kHz and a high intrinsic optical quality factor Q >10^5 while at the same time permitting electromechanical coupling to a microwave electrode. Coherent microwave-tooptical transductionwas shown at room temperature for this device and the electromechanical coupling rate could be extracted from a model derived by input-output theory. The electromechanical coupling between the electro-optomechanical device and a superconducting qubit was estimated to be g/2 pi = O(200kHz) which indicates that strong coupling between the here presented device and a superconducting transmon qubit is achievable. In addition, superconducting microwave cavities with high quality factor at single photon energy Q ~ 5x10^5 were fabricated and measured to verify that fabrication process of the microwave-to-optical transducer is compatible with high-quality superconducting microwave circuits.
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.