Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.26161

A two-dimensional piezo-optomechanical transducer

Tian Xie, Nelson Ooi, Linus Woodard, Sultan Malik, Felix Mayor, Oliver A. Hitchcock, André G. Primo, Wentao Jiang, Samuel Gyger, Amir H. Safavi-Naeini

quant-phSubmitted Jul 28, 2026• Announced Jul 30, 2026• 0 citations
arXivHTMLPDF

Abstract

Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.

Related papers

Design of an ultra-low mode volume piezo-optomechanical quantum transducer

Piero Chiappina, Jash Banker, Srujan Meesala +3 more

Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.

arXiv:2303.03664•Optics Express•Jun 14, 2023•14 citations

Design of a release-free piezo-optomechanical quantum transducer

Paul Burger, Joey Frey, Johan Kolvik +2 more

Quantum transduction between microwave and optical photons offers the potential to merge the long-range connectivity of optical photons with the deterministic quantum operations of superconducting microwave qubits. A promising approach to achieving this uses an intermediary mechanical mode along with piezo-optomechanical interactions. Traditionally, these transducers are suspended to confine mechanical fields, but this complicates manufacturing and comes with the major challenge of poor thermal anchoring and a trade-off between noise and efficiency. To overcome these issues, we introduce the—to our knowledge—first design of a release-free electro-optomechanical quantum transducer. Our release-free, i.e., non-suspended, design leverages a silicon-on-sapphire platform. It combines release-free lithium niobate electromechanical crystals with silicon optomechanical crystals on a sapphire substrate, optimizing thermal anchoring and microwave and mechanical coherence. Despite departing from the traditional suspended transducer paradigm, our release-free design achieves coupling rates sufficient for quantum-level interactions between microwave photons, phonons, and optical photons. Unconventionally, it utilizes high-wavevector mechanical modes tightly confined to the chip surface. Beyond quantum science and engineering, this platform and its design principles could also propel low-power acousto-optic systems in integrated photonics.

arXiv:2408.15134•APL Photonics•Jan 1, 2025•11 citations

High photon-phonon pair generation rate in a two-dimensional optomechanical crystal

Felix M. Mayor, Sultan Malik, André G. Primo +4 more

Abstract Integrated optomechanical systems are a leading platform for manipulating, sensing, and distributing quantum information, but are limited by residual optical heating. Here, we demonstrate a two-dimensional optomechanical crystal (OMC) geometry with increased thermal anchoring and a mechanical mode at 7.4 GHz, well aligned with the operation range of cryogenic microwave hardware and piezoelectric transducers. The eight times better thermalization than current one-dimensional OMCs, large optomechanical coupling rates, g 0/2π ≈ 880 kHz, and high optical quality factors, Q opt = 2.4 × 105, allow ground-state cooling (n m = 0.32) of the acoustic mode from 3 K and entering the optomechanical strong-coupling regime. In pulsed sideband asymmetry measurements, we show ground-state operation (n m < 0.45) at temperatures below 10 mK, with repetition rates up to 3 MHz, generating photon-phonon pairs at ≈ 147 kHz. Our results extend optomechanical system capabilities and establish a robust foundation for future microwave-to-optical transducers with entanglement rates exceeding state-of-the-art superconducting qubit decoherence rates.

arXiv:2406.14484•Nature Communications•Mar 15, 2025•14 citations

Piezoelectric Optomechanical Approaches for Efficient Quantum Microwave-to-Optical Signal Transduction: The Need for Co-Design

Krishna C. Balram, Kartik A. Srinivasan

Piezoelectric optomechanical platforms represent one of the most promising routes toward achieving quantum transduction of photons between the microwave and optical frequency domains. However, there are significant challenges to achieving near-unity transduction efficiency. The authors discuss such factors in the context of the two main approaches being pursued for high efficiency transduction. The first approach uses 1D nanobeam optomechanical crystals excited by interdigitated transducers and is characterized by large single-photon optomechanical coupling strength, limited intracavity pump photon population to avoid absorption-induced heating (at cryogenic temperature), and low phonon injection efficiency from the transducer to the optomechanical cavity. The second approach uses (quasi) bulk acoustic wave resonators integrated into photonic Fabry–Perot cavity geometries and is characterized by low single-photon optomechanical coupling strength, high intracavity pump photon population without significant heating, and high phonon injection efficiency. After reviewing the current status of both approaches, the need for co-designing the electromechanical and optomechanical sub-systems is discussed in order to achieve high transduction efficiencies, taking the GaAs piezo-optomechanical platform as an example.

•Jan 17, 2022•41 citations

High-efficiency low-noise optomechanical crystal photon-phonon transducers

Sameer Sonar, Utku Hatipoğlu, Srujan Meesala +3 more

Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical-absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address this challenge with a two-dimensional silicon OMC resonator that is side-coupled to a mechanically detached optical waveguide, realizing a six-fold reduction in the heating rate of the acoustic resonator compared to prior state-of-the-art, while operating in a regime of high optomechanical-backaction and millikelvin base temperature. This reduced heating translates into a demonstrated phonon-to-photon conversion efficiency of 93.1±0.8% at an added noise of 0.25±0.01 quanta, representing a significant advance toward quantum-limited microwave-optical frequency conversion and optically controlled quantum acoustic memories.

Optica•Dec 2, 2024•15 citations

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface

Xu Han, Wei Fu, Changchun Zhong +8 more

Abstract Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10 GHz phonons are resonantly coupled with photons in a superconducting cavity and a nanophotonic cavity at the same time. Taking advantage of the large piezo-mechanical cooperativity (Cem ~7) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.

arXiv:2001.09483•Nature Communications•Jun 26, 2020•122 citations
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.
Quantum transduction between microwave and optical photons offers the potential to merge the long-range connectivity of optical photons with the deterministic quantum operations of superconducting microwave qubits. A promising approach to achieving this uses an intermediary mechanical mode along with piezo-optomechanical interactions. Traditionally, these transducers are suspended to confine mechanical fields, but this complicates manufacturing and comes with the major challenge of poor thermal anchoring and a trade-off between noise and efficiency. To overcome these issues, we introduce the—to our knowledge—first design of a release-free electro-optomechanical quantum transducer. Our release-free, i.e., non-suspended, design leverages a silicon-on-sapphire platform. It combines release-free lithium niobate electromechanical crystals with silicon optomechanical crystals on a sapphire substrate, optimizing thermal anchoring and microwave and mechanical coherence. Despite departing from the traditional suspended transducer paradigm, our release-free design achieves coupling rates sufficient for quantum-level interactions between microwave photons, phonons, and optical photons. Unconventionally, it utilizes high-wavevector mechanical modes tightly confined to the chip surface. Beyond quantum science and engineering, this platform and its design principles could also propel low-power acousto-optic systems in integrated photonics.
Abstract Integrated optomechanical systems are a leading platform for manipulating, sensing, and distributing quantum information, but are limited by residual optical heating. Here, we demonstrate a two-dimensional optomechanical crystal (OMC) geometry with increased thermal anchoring and a mechanical mode at 7.4 GHz, well aligned with the operation range of cryogenic microwave hardware and piezoelectric transducers. The eight times better thermalization than current one-dimensional OMCs, large optomechanical coupling rates, g 0/2π ≈ 880 kHz, and high optical quality factors, Q opt = 2.4 × 105, allow ground-state cooling (n m = 0.32) of the acoustic mode from 3 K and entering the optomechanical strong-coupling regime. In pulsed sideband asymmetry measurements, we show ground-state operation (n m < 0.45) at temperatures below 10 mK, with repetition rates up to 3 MHz, generating photon-phonon pairs at ≈ 147 kHz. Our results extend optomechanical system capabilities and establish a robust foundation for future microwave-to-optical transducers with entanglement rates exceeding state-of-the-art superconducting qubit decoherence rates.
Piezoelectric optomechanical platforms represent one of the most promising routes toward achieving quantum transduction of photons between the microwave and optical frequency domains. However, there are significant challenges to achieving near-unity transduction efficiency. The authors discuss such factors in the context of the two main approaches being pursued for high efficiency transduction. The first approach uses 1D nanobeam optomechanical crystals excited by interdigitated transducers and is characterized by large single-photon optomechanical coupling strength, limited intracavity pump photon population to avoid absorption-induced heating (at cryogenic temperature), and low phonon injection efficiency from the transducer to the optomechanical cavity. The second approach uses (quasi) bulk acoustic wave resonators integrated into photonic Fabry–Perot cavity geometries and is characterized by low single-photon optomechanical coupling strength, high intracavity pump photon population without significant heating, and high phonon injection efficiency. After reviewing the current status of both approaches, the need for co-designing the electromechanical and optomechanical sub-systems is discussed in order to achieve high transduction efficiencies, taking the GaAs piezo-optomechanical platform as an example.
Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical-absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address this challenge with a two-dimensional silicon OMC resonator that is side-coupled to a mechanically detached optical waveguide, realizing a six-fold reduction in the heating rate of the acoustic resonator compared to prior state-of-the-art, while operating in a regime of high optomechanical-backaction and millikelvin base temperature. This reduced heating translates into a demonstrated phonon-to-photon conversion efficiency of 93.1±0.8% at an added noise of 0.25±0.01 quanta, representing a significant advance toward quantum-limited microwave-optical frequency conversion and optically controlled quantum acoustic memories.
Abstract Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10 GHz phonons are resonantly coupled with photons in a superconducting cavity and a nanophotonic cavity at the same time. Taking advantage of the large piezo-mechanical cooperativity (Cem ~7) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.