Measurement-Induced State transitions in Inductively-Shunted Transmons
Nicholas Zobrist, John Mark Kreikebaum, Mostafa Khezri, Sergei V. Isakov, Brian J. Lester, Yaxing Zhang, Agustin Di Paolo, Daniel Sank, W. Clarke Smith
quant-phSubmitted Mar 12, 2026• Announced Mar 13, 2026• 0 citations• Revised Oct 5, 2026 (v2)
Fast and high-fidelity qubit measurement plays a key role in quantum error correction. In superconducting qubits, measurement is typically performed using a resonant microwave drive on a readout resonator dispersively coupled to the qubit. Shorter measurement times require larger numbers of photons populating the readout resonator, which ultimately leads to undesired measurementinduced state transitions (MIST) of the qubit. MIST can be particularly problematic because these transitions often leave the qubit in a high energy state, and the MIST locations in readout parameter space drift as a function of qubit offset charge. In transmon qubits, these drifts have been avoided using very large qubit-resonator detunings or dedicated offset charge biases. In this work, we take an alternative approach and add an inductive shunt to the transmon to eliminate the offset charge dependence and stabilize the MIST. We experimentally characterize MIST in several different inductively-shunted transmons, in agreement with quantum and semiclassical models for MIST. These results extend to other inductively-shunted qubits.
Fast and high-fidelity qubit measurement plays a key role in quantum error correction. In superconducting qubits, measurement is typically performed using a resonant microwave drive on a readout resonator dispersively coupled to the qubit. Shorter measurement times require larger numbers of photons populating the readout resonator, which ultimately leads to undesired measurementinduced state transitions (MIST) of the qubit. MIST can be particularly problematic because these transitions often leave the qubit in a high energy state, and the MIST locations in readout parameter space drift as a function of qubit offset charge. In transmon qubits, these drifts have been avoided using very large qubit-resonator detunings or dedicated offset charge biases. In this work, we take an alternative approach and add an inductive shunt to the transmon to eliminate the offset charge dependence and stabilize the MIST. We experimentally characterize MIST in several different inductively-shunted transmons, in agreement with quantum and semiclassical models for MIST. These results extend to other inductively-shunted qubits.
A key challenge in achieving scalable fault tolerance in superconducting quantum processors is readout fidelity, which lags behind one- and two-qubit gate fidelity. A major limitation in improving qubit readout is measurement-induced transitions, also referred to as qubit ionization, caused by multiphoton qubit-resonator excitation occurring at specific photon numbers. Since ionization can involve highly excited states, it has been predicted that in transmons-the most widely used superconducting qubit-the photon number at which measurement-induced transitions occur is gate-charge dependent. This dependence is expected to persist deep in the transmon regime where the qubit frequency is gate-charge insensitive. We experimentally confirm this prediction by characterizing measurement-induced transitions with increasing resonator photon population while actively calibrating the transmon's gate charge. Furthermore, because highly excited states are involved, achieving quantitative agreement between theory and experiment requires accounting for higher-order harmonics in the transmon Hamiltonian.
High-fidelity and rapid qubit readout is essential for superconducting quantum processors, typically realized through the quantum non-demolition (QND) dispersive interaction within a qubit-resonator architecture. However, the achievable readout speed and fidelity are fundamentally limited by measurement-induced state transitions (MIST). For a transmon qubit, MIST is highly sensitive to the offset charge ng due to the charge dispersion of its higher-lying energy levels. In this work, we systematically investigate ng-dependent MIST dynamics governed by the diabaticity and symmetry of pulse shaping within a charge-sensitive transmon architecture. We engineer fast-load and fast-clear pulses that effectively suppress resonator photon overshoots, thereby demonstrating a highly practical strategy to mitigate MIST without requiring complex waveforms or real-time feedback. Utilizing active gate-voltage control and rapid feedback, the measurement-induced transition probability is precisely mapped against ng and the steady-state resonator photon number, exhibiting strong agreement with numerical Floquet branch analysis. Ultimately, we evaluate the ng-averaged total error probabilities for both readout and post-readout stages, verifying that a straightforward three-step pulse scheme consistently minimizes overall readout errors. Within the framework of large-scale superconducting quantum processors, this practical, hardware-free approach inherently offers a better trade-off between the readout signal-to-noise ratio and QND preservation.
Superconducting qubits are most often measured using dispersive readout, which, ideally, implements a projective quantum non-demolition (QND) measurement. While a larger readout drive can increase the signal and, thus, reduce discrimination errors in the readout, strong microwave drives may also cause non-QND errors by driving the qubit to a state outside the computational subspace. In this work, we experimentally characterize measurement-induced state transitions (MIST) in a fluxonium qubit over its full external flux range. We further numerically calculate the MIST errors, and find that the theory accurately predicts eleven experimentally identified regions with increased MIST. In addition to transitions to higher fluxonium levels, we also find that, at certain flux points, MIST errors are dominated by transitions that include the transmission-line-like array modes of the fluxonium's superinductor. The excellent match between theory and experiment validates that the models accurately predict the occurrence of MIST in these systems, and further highlights the influence of array modes in fluxonium readout.
Dispersive readout of the transmon qubit in circuit QED is known to lose its quantum non-demolition character at small to moderate measurement drive amplitudes. This phenomenon is understood to originate from Laundau-Zener transitions at accidental multi-photon resonances, where n drive photons can promote the transmon by m levels. This interpretation has been shown to be in agreement with experiments characterizing the dispersive readout of a single transmon. The impact of these measurement-induced state transition (MIST) of a transmon embedded in a multi-qubit chip, however, remains largely unexplored. Here, we show that the presence of other components, such as qubits and couplers, can affect the MIST threshold of a measured transmon. To arrive at these results, we present a general method to characterize measurement-induced transition when the qubit under readout is coupled to other circuit elements, a ubiquitous situation in circuit QED-based quantum processors. As an example, we consider the case of two transmon qubits, and we show that the spectator qubit can be impacted by the measurement-induced transition of the readout qubit and, conversely, that the presence of the spectator qubit can lower the MIST threshold of the readout qubit. Finally, we explore how adding a coupler mode between the two qubits further modifies these effects.
Repeated quantum non-demolition measurement is a cornerstone of quantum error correction protocols. In superconducting qubits, the speed of dispersive state readout can be enhanced by increasing the power of the readout tone. However, such an increase has been found to result in additional qubit state transitions that violate the desired quantum non-demolition character of the measurement. Recently, the readout of a transmon superconducting qubit was improved by using a tone with frequency much larger than the qubit frequency. Here, we experimentally identify the mechanisms of readout-induced transitions in this regime. In the dominant mechanism, the energy of an incoming readout photon is partially absorbed by the transmon and partially returned to the transmission line as a photon with lower frequency. Other mechanisms involve the excitation of unwanted package modes, decay via material defects, and, at higher qubit frequencies, the activation of undesired resonances in the transmon spectrum. Our work provides a comprehensive characterization of superconducting qubit state transitions caused by a strong drive.
Fast, accurate, and low-leakage qubit measurement is a key requirement for quantum error correction. Here, we demonstrate measurement of a superconducting transmon qubit with a total duration of 97(1) ns, defined as the time from the start of the measurement pulse until the measurement-induced error on a subsequent π-pulse operation falls below 10−4. By combining a large state-averaged resonator decay rate of κeff/2π = 30.8 MHz with a dispersive shift close to the optimal SNR-per-photon condition, we achieve an assignment error of 0.17(1)% using a 58-ns measurement pulse, with residual readout photons depleting passively in tens of nanoseconds without an active depletion pulse. Using a repeated-measurement sequence together with a leakage-sensitive measurement, we benchmark the measurement-induced state transitions, finding a per-measurement leakage rate of 2.7(2)×10−5, only twice the background rate and two orders of magnitude below the measurement-induced relaxation rate, which dominates the assignment error. Floquet simulations indicate that the multiphoton resonances present at the operating point are weakly coupled and traversed diabatically, without causing leakage. These results demonstrate that a large resonator decay rate, combined with a dispersive shift close to the optimal SNR-per-photon condition, can enable fast, high-fidelity, low-leakage dispersive readout at small qubit-resonator detuning.