Accurate frequency estimation of oscillating signals over a broad bandwidth is a central task in quantum sensing, yet it is often compromised by spurious responses to higher-order harmonics in realistic multi-frequency environments. Here we experimentally demonstrate a high-accuracy and broadband quantum frequency sensing protocol based on geodesic control, implemented using the electron spin of a single nitrogen-vacancy center in diamond. By engineering an intrinsically single-frequency response, geodesic control enables bias-free frequency estimation with strong suppression of harmonic-induced systematic errors across a wide spectral range spanning from the megahertz to the gigahertz regime. Furthermore, by incorporating synchronized readout, we achieve millihertz-level frequency resolution under noisy signal conditions. Our results provide systematic experimental benchmarking of geodesic control for quantum frequency sensing and establish it as a practical approach for high-accuracy metrology in realistic environments.
Accurate frequency estimation of oscillating signals over a broad bandwidth is a central task in quantum sensing, yet it is often compromised by spurious responses to higher-order harmonics in realistic multi-frequency environments. Here we experimentally demonstrate a high-accuracy and broadband quantum frequency sensing protocol based on geodesic control, implemented using the electron spin of a single nitrogen-vacancy center in diamond. By engineering an intrinsically single-frequency response, geodesic control enables bias-free frequency estimation with strong suppression of harmonic-induced systematic errors across a wide spectral range spanning from the megahertz to the gigahertz regime. Furthermore, by incorporating synchronized readout, we achieve millihertz-level frequency resolution under noisy signal conditions. Our results provide systematic experimental benchmarking of geodesic control for quantum frequency sensing and establish it as a practical approach for high-accuracy metrology in realistic environments.
We present a quantum sensing technique that utilizes a sequence of π pulses to cyclically drive the qubit dynamics along a geodesic path of adiabatic evolution. This approach effectively suppresses the effects of both decoherence noise and control errors while simultaneously removing unwanted resonance terms, such as higher harmonics and spurious responses commonly encountered in dynamical decoupling control. As a result, our technique offers robust, wide-band, unambiguous, and high-resolution quantum sensing capabilities for signal detection and individual addressing of quantum systems, including spins. To demonstrate its versatility, we showcase successful applications of our method in both low-frequency and high-frequency sensing scenarios. The significance of this quantum sensing technique extends to the detection of complex signals and the control of intricate quantum environments. By enhancing detection accuracy and enabling precise manipulation of quantum systems, our method holds considerable promise for a variety of practical applications.
Quantum systems composed of solid-state electronic spins can be sensitive detectors of narrowband magnetic fields. A prominent example is the nitrogen-vacancy (NV) center in diamond, which has been employed for magnetic spectroscopy with high spatial and spectral resolution. However, NV-diamond spectroscopy protocols are typically based on dynamical decoupling sequences, which are limited to low-frequency signals ( ≲ 20 MHz) due to the technical requirements on microwave (MW) pulses used to manipulate NV electronic spins. In this work, we experimentally demonstrate a high-resolution magnetic spectroscopy protocol that integrates a quantum frequency mixing (QFM) effect in a dense NV ensemble with coherently averaged synchronized readout (CASR) to provide both a wide range of signal frequency detection and sub-Hz spectral resolution. We assess the sensitivity of this QFM-CASR protocol across a frequency range of 10 MHz to 4 GHz. By measuring the spectra of multi-frequency signals near 0.6, 2.4 and 4 GHz, we demonstrate sub-Hz spectral resolution with a nT-scale noise floor for the target signal, and precise phase measurement with error < 1 ∘ . Compared to state-of-the-art NV-diamond techniques for high-resolution magnetic spectroscopy, the QFM-CASR protocol extends the signal frequency range by more than an order of magnitude, enabling applications in radio frequency (RF) and MW signal microscopy and analysis, as well as tesla-scale nuclear magnetic resonance (NMR) spectroscopy of small samples.
Abstract Quantum systems composed of solid-state electronic spins can be sensitive detectors of narrowband magnetic fields. A prominent example is the nitrogen-vacancy (NV) center in diamond, which has been employed for magnetic spectroscopy with high spatial and spectral resolution. However, NV-diamond spectroscopy protocols are typically based on dynamical decoupling sequences, which are limited to low-frequency signals (≲ 20 MHz) due to the technical requirements on microwave (MW) pulses used to manipulate NV electronic spins. In this work, we experimentally demonstrate a high-resolution magnetic spectroscopy protocol that integrates a quantum frequency mixing (QFM) effect in a dense NV ensemble with coherently averaged synchronized readout (CASR) to provide both a wide range of signal frequency detection and sub-Hz spectral resolution. We assess the sensitivity of this QFM-CASR protocol across a frequency range of 10 MHz to 4 GHz. By measuring the spectra of multi-frequency signals near 0.6, 2.4 and 4 GHz, we demonstrate sub-Hz spectral resolution with a nT-scale noise floor for the target signal, and precise phase measurement with error <1°. Compared to state-of-the-art NV-diamond techniques for narrowband magnetic spectroscopy, the QFM-CASR protocol greatly extends the detectable frequency range, enabling applications in high-frequency radio frequency (RF) and MW signal microscopy and analysis, as well as tesla-scale nuclear magnetic resonance (NMR) spectroscopy of small samples.
Enhancing quantum sensing The quantum properties of the nitrogen vacancy (NV) defect in diamond can be used as an atomic compass needle that is sensitive to tiny variations in magnetic field. Schmitt et al. and Boss et al. successfully enhanced this sensitivity by several orders of magnitude (see the Perspective by Jordan). They applied a sequence of pulses to the NV center, the timing of which was set by and compared with a highly stable oscillator. This allowed them to measure the frequency of an oscillating magnetic field (megahertz bandwidth) with submillihertz resolution. Such enhanced precision measurement could be applied, for example, to improve nuclear magnetic resonance-based imaging protocols of single molecules. Science , this issue p. 832 , p. 837 ; see also p. 802
Quantum sensors are known for their high sensitivity in sensing applications. However, this sensitivity often comes with severe restrictions on other parameters which are also important. Examples are that in measurements of arbitrary signals, limitation in linear dynamic range could introduce distortions in magnitude and phase of the signal. High frequency resolution is another important feature for reconstructing unknown signals. Here, we demonstrate a distortion-free quantum sensing protocol that combines a quantum phase-sensitive detection with heterodyne readout. We present theoretical and experimental investigations using nitrogen-vacancy centers in diamond, showing the capability of reconstructing audio frequency signals with an extended linear dynamic range and high frequency resolution. Melody and speech based signals are used for demonstrating the features. The methods could broaden the horizon for quantum sensors towards applications, e.g. telecommunication in challenging environment, where low-distortion measurements are required at multiple frequency bands within a limited volume.
Quantum technologies are expected to significantly change our world in the next decades and the possible applications are diverse – ranging from quantum computation and encryption to metrology with unprecedented sensitivity. This thesis focuses on quantum sensing and imaging based on single nitrogen-vacancy (NV) centres in diamond to measure magnetic fields. Its electronic spin qualifies this point defect as a highly sensitive quantum sensor and its atomic size offers nanoscale spatial resolution. The simple optical initialisation and readout, together with the relatively long coherence time at ambient conditions, make NV centres promising candidates for biological applications and in particular for nuclear magnetic resonance (NMR) on the nanoscale. Recording the spectral information on the nanoscale allows to determine the structure of single or just a few molecules. However, the current main problems and challenges include insufficient spectral resolution, artificial signals and overall poor performance. In this thesis new spectroscopic techniques which tackle these issues are presented. First, it is shown that by randomisation of control pulse phases spurious harmonic signals can be suppressed, which otherwise complicate spectrum interpretation and can lead to false signal identification. At the same time the effects of pulse imperfections are mitigated. Furthermore, a protocol allowing to measure with a coherence independent spectral resolution is presented. It is demonstrated that linewidths below 1mHz are possible, which is an improvement of more than seven orders of magnitude compared to traditional methods. Due to its simple implementation, the protocol is relevant for many applications. Initially developed to measure signals oscillating up to several megahertz, it is further shown that modifications allow to extend the frequency range into the gigahertz domain. Finally, quantum frequency discrimination with the task to differentiate between two frequency distributions using a quantum sensor is analysed. An optimised protocol is introduced and the influences of different readout strategies are discussed with respect to the probability to make an incorrect decision. These findings are useful for diagnostic tests in NMR.