Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2601.14995 · Chinese Optics Letters

Low-frequency fiber-optic vibration sensing with a Floquet-engineered optical lattice clock

Mojuan Yin, Ruohui Wang, Rui Zhou, Xueguang Qiao, Shougang Zhang

quant-phSubmitted Jan 21, 2026• Announced Jan 22, 2026• 0 citations
arXivHTMLPDF

Abstract

We propose a Floquet-engineered optical lattice clock based demodulation scheme to enhance the low-frequency performance of wound fiber-optic vibration sensors. Vibration-induced phase variations in the sensing fiber are demodulated by the Floquet-engineered Rabi spectra of the clock transition. The lattice depth with the fiber length and the Floquet-engineered Rabi spectra under the vibration from 200 Hz down to 0.5 Hz are simulated. With a fiber length of 4 km and transmission loss of 2 dB/km, a phase change sensitivity higher than 6 * 10^3 rad per g is achieved at both vibration frequencies of 200 Hz and 0.5 Hz.

Journal reference
Chinese Optics Letters, 2026, 24(9):90201
DOI
10.3788/COL202624.090201

Related papers

A novel scheme for acoustic sensing based on a Floquet optical lattice clock

Mo-Juan Yin, Tao Wang, Hong CHANG

The optical lattice clocks were proved to be a powerful tool for precision measurement, like measuring the gravitational redshift at tiny gravity potential difference and monitoring the crustal deformations with ultrahigh accuracy. The Floquet optical lattice clock utilizes a time periodical acoustic wave acting on the optical lattice potential. Those atoms trapped in the lattice site will be compelled to move slightly with the modulated potential. These micromotions generate a series of Floquet quasi-energies which the atomic spectra would present for us. In virtue of Floquet engineering optical lattice theoretical model, the periodic acoustic wave signal acting on the lattice potential could be extracted. In this paper, we propose a novel way for acoustic sensing based on a 87Sr Floquet optical lattice clock. It may assist the traditional acoustic sensing technology based on fiber in achieving higher signal-noise ratio and accuracy. From the clockmaker's point of view, it may help us monitoring the environmental acoustic noise caused by vibrations and calibrate in time, especially when the optical clock operating in a movable carrier both on earth and space, what is even more important.

Advanced Fiber Laser Conference (AFL)•Mar 18, 2024•0 citations

Floquet Engineering Hz-Level Rabi Spectra in Shallow Optical Lattice Clock

Mo-Juan Yin, Xiaotong Lu, Ting Li +4 more

Quantum metrology with ultrahigh precision usually requires atoms prepared in an ultrastable environment with well-defined quantum states. Thus, in optical lattice clock systems deep lattice potentials are used to trap ultracold atoms. However, decoherence, induced by Raman scattering and higher order light shifts, can significantly be reduced if atomic clocks are realized in shallow optical lattices. On the other hand, in such lattices, tunneling among different sites can cause additional dephasing and strongly broadening of the Rabi spectrum. Here, in our experiment, we periodically drive a shallow ^{87}Sr optical lattice clock. Counterintuitively, shaking the system can deform the wide broad spectral line into a sharp peak with 5.4 Hz linewidth. With careful comparison between the theory and experiment, we demonstrate that the Rabi frequency and the Bloch bands can be tuned, simultaneously and independently. Our work not only provides a different idea for quantum metrology, such as building shallow optical lattice clock in outer space, but also paves the way for quantum simulation of new phases of matter by engineering exotic spin orbit couplings.

arXiv:2110.07169•Physical Review Letters•Feb 17, 2022•35 citations

Rabi Spectroscopy and Sensitivity of a Floquet Engineered Optical Lattice Clock

Mo-Juan Yin, Tao Wang, Xiaotong Lu +6 more

We periodically modulate the lattice trapping potential of a 87 Sr optical clock to Floquet engineer the clock transition. In the context of atomic gases in lattices, Floquet engineering has been used to shape the dispersion and topology of Bloch quasi-energy bands. Differently from these previous works manipulating the external (spatial) quasi-energies, we target the internal atomic degrees of freedom. We shape Floquet spin quasi-energies and measure their resonance profiles with Rabi spectroscopy. We provide the spectroscopic sensitivity of each band by measuring the Fisher information and show that this is not depleted by the Floquet dynamical modulation. The demonstration that the internal degrees of freedom can be selectively engineered by manipulating the external degrees of freedom inaugurates a novel device with potential applications in metrology, sensing and quantum simulations.

arXiv:2007.00851•Chinese Physics Letters•Jul 1, 2021•21 citations

Realization of Hz-Level Rabi Spectra in Shallow Optical Lattice Clock

Mo-Juan Yin, Tao Wang, Xiaotong Lu +4 more

The quantum metrology with ultra-high precision usually requires the atoms prepared in an ultra-stable environment with well-defined quantum states. Thus, the optical lattice clock system chooses deep lattice potential to trap the ultra-cold atoms. However, building atomic clock in shallow optical lattice can greatly reduce decoherence rate induced by Raman scattering as well as higher order light shift, but tunneling among the lattice sites will cause additional dephasing and strongly broadening of the Rabi spectrum. Here, we periodically drive the shallow $^{87}$Sr optical lattice clock in the experiment. Counterintuitively, shaking the system can deform the wide broad spectral line into a sharp peak with 5.4Hz line-width. With careful comparison between the theory and experiment, we demonstrate the Rabi frequency and Bloch bands can be simultaneously and independently tuned by adjusting the driving frequency and amplitude. Our work not only provides a different idea for quantum metrology, such as building shallow optical lattice clock in outer space, but also paves the way for quantum simulation of new phase of matter, such as engineering exotic spin orbit coupling Hamiltonian.

•Oct 14, 2021•0 citations

Floquet Modulation for Measuring Probe-Induced Shifts in Optical Lattice Clocks

Ruo-Shui 弱水 Han 韩, Yan-Hua Zhou

Abstract We investigate Floquet modulation for measuring the probe-induced AC Stark shift coefficient in optical lattice clocks. Periodic frequency modulation allows a high probe intensity to enlarge the measured frequency difference between the settings at low and high probe power while Bessel function dressing maintains a narrow excitation spectrum. This combination improves sensitivity to the coefficient without sacrificing frequency discrimination. We identify modulation conditions that suppress additional frequency shifts while avoiding strong motional resonances. At the same probe intensities and total measurement time, numerical simulations including preparation time show a lower coefficient uncertainty than conventional Rabi inter-rogation with a single π pulse. At high probe intensities, the Floquet coefficient uncertainty approaches a plateau dominated by Rabi frequency calibration.

Chinese Physics B•Oct 26, 2026•0 citations

Frequency Measurement of a Sr Optical Lattice Clock Using a Coherent Optical Link over a 120-km Fiber

Feng-Lei Hong, M. Musha, Masao Takamoto +11 more

We demonstrate a precision frequency measurement using a phase-stabilized 120-km optical fiber link over a physical distance of 50 km. The absolute frequency of the 87Sr optical lattice clock is measured to be 429228004229874.1(2.4) Hz.

Conference on Lasers and Electro-Optics•Jan 1, 2009•0 citations
We propose a Floquet-engineered optical lattice clock based demodulation scheme to enhance the low-frequency performance of wound fiber-optic vibration sensors. Vibration-induced phase variations in the sensing fiber are demodulated by the Floquet-engineered Rabi spectra of the clock transition. The lattice depth with the fiber length and the Floquet-engineered Rabi spectra under the vibration from 200 Hz down to 0.5 Hz are simulated. With a fiber length of 4 km and transmission loss of 2 dB/km, a phase change sensitivity higher than 6 * 10^3 rad per g is achieved at both vibration frequencies of 200 Hz and 0.5 Hz.
The optical lattice clocks were proved to be a powerful tool for precision measurement, like measuring the gravitational redshift at tiny gravity potential difference and monitoring the crustal deformations with ultrahigh accuracy. The Floquet optical lattice clock utilizes a time periodical acoustic wave acting on the optical lattice potential. Those atoms trapped in the lattice site will be compelled to move slightly with the modulated potential. These micromotions generate a series of Floquet quasi-energies which the atomic spectra would present for us. In virtue of Floquet engineering optical lattice theoretical model, the periodic acoustic wave signal acting on the lattice potential could be extracted. In this paper, we propose a novel way for acoustic sensing based on a 87Sr Floquet optical lattice clock. It may assist the traditional acoustic sensing technology based on fiber in achieving higher signal-noise ratio and accuracy. From the clockmaker's point of view, it may help us monitoring the environmental acoustic noise caused by vibrations and calibrate in time, especially when the optical clock operating in a movable carrier both on earth and space, what is even more important.
Quantum metrology with ultrahigh precision usually requires atoms prepared in an ultrastable environment with well-defined quantum states. Thus, in optical lattice clock systems deep lattice potentials are used to trap ultracold atoms. However, decoherence, induced by Raman scattering and higher order light shifts, can significantly be reduced if atomic clocks are realized in shallow optical lattices. On the other hand, in such lattices, tunneling among different sites can cause additional dephasing and strongly broadening of the Rabi spectrum. Here, in our experiment, we periodically drive a shallow ^{87}Sr optical lattice clock. Counterintuitively, shaking the system can deform the wide broad spectral line into a sharp peak with 5.4 Hz linewidth. With careful comparison between the theory and experiment, we demonstrate that the Rabi frequency and the Bloch bands can be tuned, simultaneously and independently. Our work not only provides a different idea for quantum metrology, such as building shallow optical lattice clock in outer space, but also paves the way for quantum simulation of new phases of matter by engineering exotic spin orbit couplings.
We periodically modulate the lattice trapping potential of a 87 Sr optical clock to Floquet engineer the clock transition. In the context of atomic gases in lattices, Floquet engineering has been used to shape the dispersion and topology of Bloch quasi-energy bands. Differently from these previous works manipulating the external (spatial) quasi-energies, we target the internal atomic degrees of freedom. We shape Floquet spin quasi-energies and measure their resonance profiles with Rabi spectroscopy. We provide the spectroscopic sensitivity of each band by measuring the Fisher information and show that this is not depleted by the Floquet dynamical modulation. The demonstration that the internal degrees of freedom can be selectively engineered by manipulating the external degrees of freedom inaugurates a novel device with potential applications in metrology, sensing and quantum simulations.
The quantum metrology with ultra-high precision usually requires the atoms prepared in an ultra-stable environment with well-defined quantum states. Thus, the optical lattice clock system chooses deep lattice potential to trap the ultra-cold atoms. However, building atomic clock in shallow optical lattice can greatly reduce decoherence rate induced by Raman scattering as well as higher order light shift, but tunneling among the lattice sites will cause additional dephasing and strongly broadening of the Rabi spectrum. Here, we periodically drive the shallow 87^{87}87Sr optical lattice clock in the experiment. Counterintuitively, shaking the system can deform the wide broad spectral line into a sharp peak with 5.4Hz line-width. With careful comparison between the theory and experiment, we demonstrate the Rabi frequency and Bloch bands can be simultaneously and independently tuned by adjusting the driving frequency and amplitude. Our work not only provides a different idea for quantum metrology, such as building shallow optical lattice clock in outer space, but also paves the way for quantum simulation of new phase of matter, such as engineering exotic spin orbit coupling Hamiltonian.
Abstract We investigate Floquet modulation for measuring the probe-induced AC Stark shift coefficient in optical lattice clocks. Periodic frequency modulation allows a high probe intensity to enlarge the measured frequency difference between the settings at low and high probe power while Bessel function dressing maintains a narrow excitation spectrum. This combination improves sensitivity to the coefficient without sacrificing frequency discrimination. We identify modulation conditions that suppress additional frequency shifts while avoiding strong motional resonances. At the same probe intensities and total measurement time, numerical simulations including preparation time show a lower coefficient uncertainty than conventional Rabi inter-rogation with a single π pulse. At high probe intensities, the Floquet coefficient uncertainty approaches a plateau dominated by Rabi frequency calibration.