Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2601.09591 · Applied Physics Letters

Submicrometer tunnel ferromagnetic Josephson junctions with transmon energy scale

Roberta Satariano, Raffaella Ferraiuolo, Francesca Calloni, Halima Giovanna Ahmad, D. Gatta, Francesco Tafuri, Alessandro Bruno, D. Massarotti

Published Dec 22, 2025• 1 citation
arXivHTMLPDF

Abstract

We have realized submicron tunnel ferromagnetic Al/AlOx/Al/Ni80Fe20/Al Josephson junctions (JJs) in Manhattan-style configuration for qubit applications. These junctions have been designed to lie within the energy range of transmons. The current–voltage characteristics of these junctions are comparable with those of standard JJs implemented in state-of-the-art transmons, thus confirming the high quality of the devices and marking a significant step toward the realization of the ferrotransmon. Low-frequency characterization confirms that our junctions operate in the quantum phase diffusion limit, as tunnel JJs in conventional transmons with similar characteristic energies. Ultimately, mitigation of quantum phase fluctuations will represent a key for advancing the entire field of superconducting quantum circuit architectures.

DOI
10.1063/5.0303194

Related papers

A feasible path for the use of ferromagnetic josephson junctions in quantum circuits: The ferro-transmon

D. Massarotti, Halima Giovanna Ahmad, Roberta Satariano +18 more

We discuss the capabilities of ferromagnetic (F) Josephson junctions (JJs) in a variety of layouts and configurations. The main goal is to demonstrate the potential of these hybrid JJs to disclose new physics and the possibility to integrate them in superconducting classical and quantum electronics for various applications. The feasible path towards the use of ferromagnetic Josephson junctions in quantum circuits starts from experiments demonstrating macroscopic quantum tunneling in NbN/GdN/NbN junctions with ferro-insulator barriers and with triplet components of the supercurrent, supported by a self-consistent electrodynamic characterization as a function of the barrier thickness. This has inspired further studies on tunnel ferromagnetic junctions with a different layout and promoted the first generation of ferromagnetic Al-based JJs, specifically Al/AlOx/Al/Py/Al. This layout takes advantage of the capability to integrate the ferromagnetic layer in the junction without affecting the quality of the superconducting electrodes and of the tunnel barrier. The high quality of the devices paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits. These achievements have promoted the notion of a novel type of qubit incorporating ferromagnetic JJs. This qubit is based on a transmon design featuring a tunnel JJ in parallel with a ferromagnetic JJ inside a SQUID loop capacitively coupled to a superconducting readout resonator. The effect of an external RF field on the magnetic switching processes of ferromagnetic JJs has been also investigated.

Low Temperature Physics•Jul 1, 2023•12 citations

Phase dynamics of tunnel Al-based ferromagnetic Josephson junctions

Halima Giovanna Ahmad, Roberta Satariano, Raffaella Ferraiuolo +8 more

By measuring the current–voltage characteristics and the switching current distributions as a function of temperature, we have investigated the phase dynamics of Al tunnel ferromagnetic Josephson junctions (JJs), designed to fall in the typical range of parameters of state-of-the-art transmons, providing evidence of phase diffusion processes. The comparison with the experimental outcomes on non-magnetic JJs with nominally the same electrodynamical parameters demonstrates that the introduction of ferromagnetic barriers does not cause any sizeable detrimental effect and supports the notion of including tunnel ferromagnetic JJs in qubit architectures.

arXiv:2406.03615•Applied Physics Letters•Jun 3, 2024•8 citations

Phase Dynamics and Dissipation in Tunnel Ferromagnetic Josephson Junctions

Francesca Calloni, Roberta Satariano, Raffaella Ferraiuolo +16 more

Abstract We investigate tunnel ferromagnetic Josephson junctions based on Superconductor-Insulator-thin superconductor-Ferromagnet-Superconductor multilayers. A comparative study of their electrodynamic properties is performed for junctions with niobium and aluminum (Al) electrodes, featuring different ferromagnetic interlayer materials and lateral dimensions ranging from the micrometric to the submicrometric scale. The parameters extracted from the fitting of the current-voltage characteristics using the tunnel junction microscopic model are found to be consistent with those independently estimated from switching current distribution measurements. Submicrometric Al-based devices exhibit electrodynamic properties comparable to those implemented in state-of-the-art transmon qubits and display clear signatures of quantum phase diffusion. The strong agreement between transport modelling and escape dynamics establishes a robust framework for describing hybrid ferromagnetic Josephson junctions consistent with their energy scales and supports their potential integration into superconducting quantum and classical digital circuits.

arXiv:2605.18586•Journal of Superconductivity and Novel Magnetism•Sep 15, 2026•0 citations

Electrodynamics of Highly Spin-Polarized Tunnel Josephson Junctions

H.G. Ahmad, R. Caruso, A. Pal +5 more

The continuous development of superconducting electronics is encouraging several studies on hybrid Josephson junctions (JJs) based on superconductor-ferromagnet-superconductor (SFS) heterostructures, as either spintronic devices or switchable elements in quantum and classical circuits. Recent experimental evidence of macroscopic quantum tunneling and of an incomplete 0-$\ensuremath{\pi}$ transition in tunnel-ferromagnetic spin-filter JJs could also enhance the capabilities of SFS JJs as active elements. Here, we provide a self-consistent electrodynamic characterization of $\mathrm{Nb}\mathrm{N}$/$\mathrm{Gd}\mathrm{N}$/$\mathrm{Nb}\mathrm{N}$ spin-filter JJs as a function of the barrier thickness, disentangling the high-frequency dissipation effects due to the environment from the intrinsic low-frequency dissipation processes. The fitting of the $I$-$V$ characteristics at 4.2 K and at 300 mK by using the tunnel-junction-microscopic model allows us to determine the subgap resistance ${R}_{\mathrm{sg}}$, the quality factor $Q$, and the junction capacitance $C$. These results provide the scaling behavior of the electrodynamic parameters as a function of the barrier thickness, which represents a fundamental step for the feasibility of tunnel-ferromagnetic JJs as active elements in quantum and classical circuits, and are of general interest for tunnel junctions other than conventional SIS JJs.

arXiv:2001.06046•Physical Review Applied•Jan 10, 2020•36 citations

Aluminum-ferromagnetic Josephson tunnel junctions for high quality magnetic switching devices

Antonio Vettoliere, Roberta Satariano, Raffaella Ferraiuolo +9 more

The competition between superconducting and ferromagnetic orderings in Josephson devices has promoted fundamental and applicative studies of high impact for superconducting digital technology, cryogenic memories, and spintronics, where the possibility of switching between different magnetic states is a crucial advantage. Here, we report on fabrication and characterization of very high quality tunnel ferromagnetic Josephson junctions (JJs) with aluminum electrodes, demonstrating hysteretic behavior of the magnetic field pattern preserving typical transport properties of Al junctions, underdamped behavior, and very low quasiparticle dissipation. The proposed technology paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits, toward alternative approaches based on digital control of the Josephson device.

Applied Physics Letters•Jun 27, 2022•14 citations

Towards Novel Tunability Schemes for Hybrid Ferromagnetic Transmon Qubits

Halima Giovanna Ahmad, Raffaella Ferraiuolo, Giuseppe Serpico +12 more

Flux tuning of qubit frequencies in superconducting quantum processors is fundamental for implementing single and multi-qubit gates in quantum algorithms. Typical architectures involve the use of DC or fast RF lines. However, these lines introduce significant heat dissipation and undesirable decoherence mechanisms, leading to a severe bottleneck for scalability. Among different solutions to overcome this issue, we propose integrating tunnel Superconductor-Insulating-thin superconducting interlayer-Ferromagnet-Superconductor Josephson junctions (SIsFS JJs) into a novel transmon qubit design, the so-called ferrotransmon. SIsFS JJs provide memory properties due to the presence of ferromagnetic barriers and preserve at the same time the low-dissipative behavior of tunnel-insulating JJs, thus promoting an alternative tuning of the qubit frequency. In this work, we discuss the fundamental steps towards the implementation of this hybrid ferromagnetic transmon. We will give a special focus on the design, simulations, and preliminary experimental characterization of superconducting lines to provide in-plane magnetic fields, fundamental for an on-chip control of the qubit frequencies in the ferrotransmon.

arXiv:2412.06562•IEEE Transactions on Applied Superconductivity•Jan 28, 2025•3 citations
We have realized submicron tunnel ferromagnetic Al/AlOx/Al/Ni80Fe20/Al Josephson junctions (JJs) in Manhattan-style configuration for qubit applications. These junctions have been designed to lie within the energy range of transmons. The current–voltage characteristics of these junctions are comparable with those of standard JJs implemented in state-of-the-art transmons, thus confirming the high quality of the devices and marking a significant step toward the realization of the ferrotransmon. Low-frequency characterization confirms that our junctions operate in the quantum phase diffusion limit, as tunnel JJs in conventional transmons with similar characteristic energies. Ultimately, mitigation of quantum phase fluctuations will represent a key for advancing the entire field of superconducting quantum circuit architectures.
We discuss the capabilities of ferromagnetic (F) Josephson junctions (JJs) in a variety of layouts and configurations. The main goal is to demonstrate the potential of these hybrid JJs to disclose new physics and the possibility to integrate them in superconducting classical and quantum electronics for various applications. The feasible path towards the use of ferromagnetic Josephson junctions in quantum circuits starts from experiments demonstrating macroscopic quantum tunneling in NbN/GdN/NbN junctions with ferro-insulator barriers and with triplet components of the supercurrent, supported by a self-consistent electrodynamic characterization as a function of the barrier thickness. This has inspired further studies on tunnel ferromagnetic junctions with a different layout and promoted the first generation of ferromagnetic Al-based JJs, specifically Al/AlOx/Al/Py/Al. This layout takes advantage of the capability to integrate the ferromagnetic layer in the junction without affecting the quality of the superconducting electrodes and of the tunnel barrier. The high quality of the devices paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits. These achievements have promoted the notion of a novel type of qubit incorporating ferromagnetic JJs. This qubit is based on a transmon design featuring a tunnel JJ in parallel with a ferromagnetic JJ inside a SQUID loop capacitively coupled to a superconducting readout resonator. The effect of an external RF field on the magnetic switching processes of ferromagnetic JJs has been also investigated.
By measuring the current–voltage characteristics and the switching current distributions as a function of temperature, we have investigated the phase dynamics of Al tunnel ferromagnetic Josephson junctions (JJs), designed to fall in the typical range of parameters of state-of-the-art transmons, providing evidence of phase diffusion processes. The comparison with the experimental outcomes on non-magnetic JJs with nominally the same electrodynamical parameters demonstrates that the introduction of ferromagnetic barriers does not cause any sizeable detrimental effect and supports the notion of including tunnel ferromagnetic JJs in qubit architectures.
Abstract We investigate tunnel ferromagnetic Josephson junctions based on Superconductor-Insulator-thin superconductor-Ferromagnet-Superconductor multilayers. A comparative study of their electrodynamic properties is performed for junctions with niobium and aluminum (Al) electrodes, featuring different ferromagnetic interlayer materials and lateral dimensions ranging from the micrometric to the submicrometric scale. The parameters extracted from the fitting of the current-voltage characteristics using the tunnel junction microscopic model are found to be consistent with those independently estimated from switching current distribution measurements. Submicrometric Al-based devices exhibit electrodynamic properties comparable to those implemented in state-of-the-art transmon qubits and display clear signatures of quantum phase diffusion. The strong agreement between transport modelling and escape dynamics establishes a robust framework for describing hybrid ferromagnetic Josephson junctions consistent with their energy scales and supports their potential integration into superconducting quantum and classical digital circuits.
The continuous development of superconducting electronics is encouraging several studies on hybrid Josephson junctions (JJs) based on superconductor-ferromagnet-superconductor (SFS) heterostructures, as either spintronic devices or switchable elements in quantum and classical circuits. Recent experimental evidence of macroscopic quantum tunneling and of an incomplete 0-$\ensuremath{\pi}$ transition in tunnel-ferromagnetic spin-filter JJs could also enhance the capabilities of SFS JJs as active elements. Here, we provide a self-consistent electrodynamic characterization of NbN\mathrm{Nb}\mathrm{N}NbN/GdN\mathrm{Gd}\mathrm{N}GdN/NbN\mathrm{Nb}\mathrm{N}NbN spin-filter JJs as a function of the barrier thickness, disentangling the high-frequency dissipation effects due to the environment from the intrinsic low-frequency dissipation processes. The fitting of the III-VVV characteristics at 4.2 K and at 300 mK by using the tunnel-junction-microscopic model allows us to determine the subgap resistance Rsg{R}_{\mathrm{sg}}Rsg​, the quality factor QQQ, and the junction capacitance CCC. These results provide the scaling behavior of the electrodynamic parameters as a function of the barrier thickness, which represents a fundamental step for the feasibility of tunnel-ferromagnetic JJs as active elements in quantum and classical circuits, and are of general interest for tunnel junctions other than conventional SIS JJs.
The competition between superconducting and ferromagnetic orderings in Josephson devices has promoted fundamental and applicative studies of high impact for superconducting digital technology, cryogenic memories, and spintronics, where the possibility of switching between different magnetic states is a crucial advantage. Here, we report on fabrication and characterization of very high quality tunnel ferromagnetic Josephson junctions (JJs) with aluminum electrodes, demonstrating hysteretic behavior of the magnetic field pattern preserving typical transport properties of Al junctions, underdamped behavior, and very low quasiparticle dissipation. The proposed technology paves the way for the possible implementation of Al tunnel-ferromagnetic JJs in superconducting quantum circuits, toward alternative approaches based on digital control of the Josephson device.
Flux tuning of qubit frequencies in superconducting quantum processors is fundamental for implementing single and multi-qubit gates in quantum algorithms. Typical architectures involve the use of DC or fast RF lines. However, these lines introduce significant heat dissipation and undesirable decoherence mechanisms, leading to a severe bottleneck for scalability. Among different solutions to overcome this issue, we propose integrating tunnel Superconductor-Insulating-thin superconducting interlayer-Ferromagnet-Superconductor Josephson junctions (SIsFS JJs) into a novel transmon qubit design, the so-called ferrotransmon. SIsFS JJs provide memory properties due to the presence of ferromagnetic barriers and preserve at the same time the low-dissipative behavior of tunnel-insulating JJs, thus promoting an alternative tuning of the qubit frequency. In this work, we discuss the fundamental steps towards the implementation of this hybrid ferromagnetic transmon. We will give a special focus on the design, simulations, and preliminary experimental characterization of superconducting lines to provide in-plane magnetic fields, fundamental for an on-chip control of the qubit frequencies in the ferrotransmon.