Quantum state readout with minimal resources is crucial for scalable quantum information processing. As a leading platform, neutral atom arrays rely on atomic fluorescence imaging for qubit readout, requiring short exposure, low photon count schemes to mitigate heating and atom loss while enabling mid-circuit feedback. However, a fundamental challenge arises in the single-photon regime where severe overlap in state distributions causes conventional threshold discrimination to fail. Here, we report an AI-accelerated Bayesian inference method for fluorescence readout in neutral atom arrays. Our approach leverages Bayesian inference to achieve reliable state detection at the single-photon level under short exposure. Specifically, we introduce a weakly anchored Bayesian scheme that requires calibration of only one state, addressing asymmetric calibration challenges common across quantum platforms. Furthermore, acceleration is achieved via a permutation-invariant neural network, which yields a 100-fold speedup by compressing iterative inference into a single forward pass. The approach achieves relative readout fidelity above 99% and 98% for histogram overlaps of 61% and 72%, respectively, enabling reliable extraction of Rabi oscillations and Ramsey interference results unattainable with conventional threshold based methods. This framework supports scalable, real-time readout of large atom arrays and paves the way toward AI-enhanced quantum technology in computation and sensing.
Quantum state readout with minimal resources is crucial for scalable quantum information processing. As a leading platform, neutral atom arrays rely on atomic fluorescence imaging for qubit readout, requiring short exposure, low photon count schemes to mitigate heating and atom loss while enabling mid-circuit feedback. However, a fundamental challenge arises in the single-photon regime where severe overlap in state distributions causes conventional threshold discrimination to fail. Here, we report an AI-accelerated Bayesian inference method for fluorescence readout in neutral atom arrays. Our approach leverages Bayesian inference to achieve reliable state detection at the single-photon level under short exposure. Specifically, we introduce a weakly anchored Bayesian scheme that requires calibration of only one state, addressing asymmetric calibration challenges common across quantum platforms. Furthermore, acceleration is achieved via a permutation-invariant neural network, which yields a 100-fold speedup by compressing iterative inference into a single forward pass. The approach achieves relative readout fidelity above 99% and 98% for histogram overlaps of 61% and 72%, respectively, enabling reliable extraction of Rabi oscillations and Ramsey interference results unattainable with conventional threshold based methods. This framework supports scalable, real-time readout of large atom arrays and paves the way toward AI-enhanced quantum technology in computation and sensing.
Quantum state readout with minimal resources is crucial for scalable quantum information processing. As a leading platform, neutral atom arrays rely on fluorescence readout, requiring short-exposure schemes to mitigate heating and atom loss. However, a fundamental challenge arises in the single-photon regime where severe overlap in state distributions causes conventional threshold discrimination to fail. Here, we report a neural-network-assisted Bayesian inference method for fluorescence readout in neutral atom arrays. We introduce a weakly anchored Bayesian scheme that requires calibration of only one state, addressing asymmetric calibration challenges common across quantum platforms. Acceleration via a permutation-invariant neural network, yields a 100-fold speedup by compressing Bayesian inference into a single forward pass. The approach achieves relative readout fidelity above 99% and 98% for histogram overlaps of 61% and 72%, respectively, enabling reliable extraction of Rabi oscillations and Ramsey interference-results unattainable with conventional threshold-based methods.
Neutral-atom arrays have rapidly advanced to support thousands of qubits and execute high-fidelity logical operations. However, these processors remain severely throttled by their slowest fundamental operation: nondestructive qubit measurement, which requires milliseconds and fundamentally limits the system's clock rate. This bottleneck arises from both an inherent photon-budget dilemma---sufficient fluorescence for reliable state discrimination must be collected without excessive heating or loss---and frame-based imaging, which imposes one common exposure and decision latency on intrinsically independent, site-local measurements. Here, we overcome these limitations with a fast, nondestructive readout architecture based on real-time, site-resolved adaptive protection. By integrating continuous photon counting with a dynamic feedforward framework, we decode qubit states with sub-microsecond latency and instantly shield atoms from redundant scattering. Demonstrated in parallel across a 100-qubit reconfigurable atom array, with adaptive protection on a 25-site subarray, this dynamic decision protocol reduces the average probe time to just 15μs. Model-free benchmarking yields a discrimination infidelity of 4.1×10−5 and an atom loss of 2.1×10−4, simultaneously setting new performance records for atom arrays. Exploiting this capability, we operate repeated quantum circuits at an unprecedented 1.7 kHz clock rate with atoms reused over 120 consecutive rounds---nearly sevenfold higher than the previous record---and enter the sub-millisecond cycle regime for the first time. By removing nondestructive readout as the dominant cycle-time bottleneck, this work unlocks high-clock-rate mid-circuit syndrome extraction, paving the way for high-throughput, fault-tolerant quantum computation.
Neutral atom arrays provide a versatile platform for quantum information processing. However, in large-scale arrays, efficient photon collection remains a bottleneck for key tasks such as fast, non-destructive qubit readout and remote entanglement distribution. We propose a cavity-based approach that enables fast, parallel operations over many atoms using multiple modes of a single optical cavity. By selectively shifting the relevant atomic transitions, each atom can be coupled to a distinct cavity mode, allowing independent simultaneous processing. We present practical system designs that support cavity-mode multiplexing with up to 50 modes, enabling rapid mid-circuit syndrome extraction and significantly enhancing entanglement distribution rates between remote atom arrays. This approach offers a scalable solution to core challenges in neutral atom arrays, advancing the development of practical quantum technologies.
Abstract Neutral-atom arrays have rapidly advanced to support thousands of qubits and execute high-fidelity logical operations. However, these processors remain severely throttled by their slowest fundamental operation: nondestructive qubit measurement, which requires milliseconds and fundamentally limits the system's clock rate. This bottleneck arises from both an inherent photon-budget dilemma--sufficient fluorescence for reliable state discrimination must be collected without excessive heating or loss--and frame-based imaging, which imposes one common exposure and decision latency on intrinsically independent, site-local measurements. Here, we overcome these limitations with a fast, nondestructive readout architecture based on real-time, site-resolved adaptive protection. By integrating continuous photon counting with a dynamic feedforward framework, we decode qubit states with sub-microsecond latency and instantly shield atoms from redundant scattering. Demonstrated in parallel across a 100-qubit reconfigurable atom array, with adaptive protection on a 25-site subarray, this dynamic decision protocol reduces the average probe time to just 15 μs. Model-free benchmarking yields a discrimination infidelity of 4.1×10 -5 and an atom loss of 2.1×10 -4 , simultaneously setting new performance records for atom arrays. Exploiting this capability, we operate repeated quantum circuits at an unprecedented 1.7 kHz clock rate with atoms reused over 120 consecutive rounds—nearly sevenfold higher than the previous record—and enter the sub-millisecond cycle regime for the first time. By removing nondestructive readout as the dominant cycle-time bottleneck, this work unlocks high-clock-rate mid-circuit syndrome extraction, paving the way for high-throughput, fault-tolerant quantum computation.
Neutral-atom arrays are a leading platform for quantum technologies, offering a promising route toward large-scale, fault-tolerant quantum computing. We propose a novel quantum processing architecture based on dual-type, dual-element atom arrays, where individually trapped atoms serve as data qubits, and small atomic ensembles enable ancillary operations. By leveraging the selective initialization, coherent control, and collective optical response of atomic ensembles, we demonstrate ensemble-assisted quantum operations that enable reconfigurable, high-speed control of individual data qubits and rapid mid-circuit readout, including both projective single-qubit and joint multi-qubit measurements. The hybrid approach of this architecture combines the long coherence times of single-atom qubits with the enhanced controllability of atomic ensembles, achieving high-fidelity state manipulation and detection with minimal crosstalk. Numerical simulations indicate that our scheme supports individually addressable single- and multi-qubit operations with fidelities of 99.5% and 99.9%, respectively, as well as fast single- and multi-qubit state readout with fidelities exceeding 99% within tens of microseconds. These capabilities open new pathways toward scalable, fault-tolerant quantum computation, enabling repetitive error syndrome detection and efficient generation of long-range entangled many-body states, thereby expanding the quantum information toolbox beyond existing platforms.
Neutral atom quantum processors have emerged as a promising platform for scalable quantum information processing, offering high-fidelity operations and exceptional qubit scalability. A key challenge in realizing practical applications is efficiently extracting readout outcomes while maintaining high system throughput, i.e., the rate of quantum task executions. In this work, we develop a theoretical framework to quantify the trade-off between readout fidelity and atomic retention. Moreover, we introduce a metric of quantum circuit iteration rate (qCIR) and employ normalized quantum Fisher information to characterize system overall performance. Further, by carefully balancing fidelity and retention, we demonstrate a readout strategy for optimizing information acquisition efficiency. Considering the experimentally feasible parameters for 87Rb atoms, we demonstrate that qCIRs of 197.2Hz and 154.5Hz are achievable using single photon detectors and cameras, respectively. These results provide practical guidance for constructing scalable and high-throughput neutral atom quantum processors for applications in sensing, simulation, and near-term algorithm implementation.