Neutral-atom arrays are a leading platform for quantum technologies, offering a promising route toward large-scale, fault-tolerant quantum computing. We propose a novel quantum processing architecture based on dual-type, dual-element atom arrays, where individually trapped atoms serve as data qubits, and small atomic ensembles enable ancillary operations. By leveraging the selective initialization, coherent control, and collective optical response of atomic ensembles, we demonstrate ensemble-assisted quantum operations that enable reconfigurable, high-speed control of individual data qubits and rapid mid-circuit readout, including both projective single-qubit and joint multi-qubit measurements. The hybrid approach of this architecture combines the long coherence times of single-atom qubits with the enhanced controllability of atomic ensembles, achieving high-fidelity state manipulation and detection with minimal crosstalk. Numerical simulations indicate that our scheme supports individually addressable single- and multi-qubit operations with fidelities of 99.5% and 99.9%, respectively, as well as fast single- and multi-qubit state readout with fidelities exceeding 99% within tens of microseconds. These capabilities open new pathways toward scalable, fault-tolerant quantum computation, enabling repetitive error syndrome detection and efficient generation of long-range entangled many-body states, thereby expanding the quantum information toolbox beyond existing platforms.
Neutral-atom arrays are a leading platform for quantum technologies, offering a promising route toward large-scale, fault-tolerant quantum computing. We propose a novel quantum processing architecture based on dual-type, dual-element atom arrays, where individually trapped atoms serve as data qubits, and small atomic ensembles enable ancillary operations. By leveraging the selective initialization, coherent control, and collective optical response of atomic ensembles, we demonstrate ensemble-assisted quantum operations that enable reconfigurable, high-speed control of individual data qubits and rapid mid-circuit readout, including both projective single-qubit and joint multi-qubit measurements. The hybrid approach of this architecture combines the long coherence times of single-atom qubits with the enhanced controllability of atomic ensembles, achieving high-fidelity state manipulation and detection with minimal crosstalk. Numerical simulations indicate that our scheme supports individually addressable single- and multi-qubit operations with fidelities of 99.5% and 99.9%, respectively, as well as fast single- and multi-qubit state readout with fidelities exceeding 99% within tens of microseconds. These capabilities open new pathways toward scalable, fault-tolerant quantum computation, enabling repetitive error syndrome detection and efficient generation of long-range entangled many-body states, thereby expanding the quantum information toolbox beyond existing platforms.
Quantum processing architectures that include multiple qubit modalities offer compelling strategies for high-fidelity operations and readout, quantum error correction, and a path for scaling to large system sizes.Such hybrid architectures have been realized for leading platforms, including superconducting circuits and trapped ions.Recently, a new approach for constructing large, coherent quantum processors has emerged based on arrays of individually trapped neutral atoms.However, these demonstrations have been limited to arrays of a single atomic element where the identical nature of the atoms makes crosstalk-free control and nondemolition readout of a large number of atomic qubits challenging.Here we introduce a dual-element atom array with individual control of single rubidium and cesium atoms.We demonstrate their independent placement in arrays with up to 512 trapping sites and observe negligible crosstalk between the two elements.Furthermore, by continuously reloading one atomic element while maintaining an array of the other, we demonstrate a new continuous operation mode for atom arrays without any off-time.Our results enable avenues for auxiliary-qubit-assisted quantum protocols such as quantum nondemolition measurements and quantum error correction, as well as continuously operating quantum processors and sensors.
Neutral atom arrays have rapidly emerged as a leading platform for quantum computing, boasting scalable, configurable arrays of single atoms trapped in optical tweezers, fast, high-fidelity entangling gates through Rydberg interactions, and programmable, parallelized control of qubit operations. Coupling an atom array to an optical cavity opens a new frontier. Leveraging enhanced light-atom interactions in cavity quantum electrodynamics, cavity- coupled atom arrays acquire capabilities that can further expand the neutral atom toolbox, including cavity-enhanced atom readouts, atom-photon entanglement, and photon-mediated interactions between distant atoms. This thesis presents a quantum hardware platform that integrates an array of neutral atoms with a high-finesse optical cavity. After describing the design and development of the experimental apparatus, I demonstrate high-fidelity atom state readout through the cavity, achieving improved speed and atom survival compared to conventional free-space imaging methods. I then introduce a new technique for selectively controlling atom-cavity coupling on arbitrary subsets of the array, using local AC Stark shifts on the excited states of the atoms. Building on these tools, I demonstrate fast, non-destructive cavity-based readout of atom arrays, a crucial bottleneck of atom array platforms. I also showcase real-time measurement and feedback capabilities with a demonstration of classical error correction, using a register of atomic bits. Finally, I describe progress toward implementing single- and two-qubit gates within the cavity-coupled system. By combining coherent control, tunable interactions, and high-fidelity, non-destructive readout integrated and real-time feedback, the cavity-coupled Rydberg atom array offers a promising path toward fault-tolerant quantum computing.
A Dual Metastable-State Encoding Architecture for Quantum Processing with 171Yb Atom Arrays
Neutral-atom arrays combine scalable qubit registers, long coherence times, flexible optical control, and strong Rydberg-mediated entangling interactions, making them a promising platform for quantum information processing. However, physical error rates remain a challenge, and fault-tolerant quantum error correction (QEC) requires repeated mid-circuit measurement and reset of ancilla qubits without disturbing nearby data qubits. This requirement introduces significant control and architectural overhead, making qubit encoding an important architectural decision. Here, we propose a dual metastable-state qubit encoding for 171Yb atoms that utilizes two independent qubit subspaces in the (6s6p)3P0 and (6s6p)3P2 manifolds. The 3P0 manifold provides a long-coherence nuclear-spin (NS) qubit suitable for storage and arithmetic operations, while the 3P2 manifold provides a hyperfine-spin (HF) qubit, with ΔHF=2π×6.7GHz, that enables fast Raman operations and direct state-selective imaging. Coherent shelving between the two metastable manifolds connects the qubit subspaces, allowing operations to be assigned to spectrally distinct processor zones. We simulate single-qubit and two-qubit gate fidelities in 3P2, as well as coherent shelving between the HF and NS qubit subspaces. We incorporate these physical-level estimates into an architectural resource estimation and logical-level simulation. Our approach integrates mid-circuit measurements and fast qubit operations within a single-species platform, providing a versatile framework for future fault-tolerant quantum computing with neutral-atom qubits.
Over the past decade, quantum information science has progressed from few-qubit demonstrations to experiments with hundreds of qubits. Neutral atom processors based on individual atoms trapped in arrays of optical tweezers have emerged as a leading candidate due to their inherent scalability and flexible connectivity. Advanced protocols like measurement-based state preparation and quantum error correction, however, require efficient crosstalk-free mid-circuit operations for the readout, reset, and replenishment of a subset of qubits. In typical single-species atom arrays, where all atoms are identical and on-resonance, such operations necessitate complex overheads from single-site addressing, coherent transport, or shielding techniques, to mitigate the qubit decoherence induced from photons scattered by neighboring atoms. To address this challenge of engineering scalable quantum architectures compatible with efficient control techniques, we introduce and implement the first dual-species atom array platform, and explore new dynamics inaccessible in single-species arrays. In this approach, two atomic species are addressed independently due to the spectral separation between their control wavelengths. We engineer two-dimensional arrays from individual rubidium (Rb) and cesium (Cs) atoms in up to 512 optical tweezers, and show that the two species can be independently trapped, cooled, and imaged with state-of-the-art performance metrics. Harnessing this intrinsic crosstalk-free control, we establish the key primitives of mid-circuit readout, real-time processing and feed-forward, and coherent mid-circuit reloading. By integrating these capabilities, we realize in-sequence, real-time correction of correlated phase errors via a spectator qubit protocol. Next, we excite atoms to Rydberg states in the Förster regime, accessing hitherto unobserved enhanced interspecies Rydberg interactions, and program them to implement the first interspecies CNOT gate. We combine this multispecies entanglement with mid-circuit readout to achieve quantum non-demolition measurement of a Rb-qubit using an auxiliary Cs-qubit, circumventing physical qubit transport. Finally, leveraging the two qubit modalities, we present the first experimental demonstration of quantum cellular automata in atom arrays using only global addressing, and prepare a 17-qubit Cs cluster state with Rb-mediated interactions. The dual-species platform and techniques established in this thesis pave the way toward measurement-based algorithms and real-time feedback control in large-scale quantum systems.
Neutral atom arrays provide a versatile platform for quantum information processing. However, in large-scale arrays, efficient photon collection remains a bottleneck for key tasks such as fast, non-destructive qubit readout and remote entanglement distribution. We propose a cavity-based approach that enables fast, parallel operations over many atoms using multiple modes of a single optical cavity. By selectively shifting the relevant atomic transitions, each atom can be coupled to a distinct cavity mode, allowing independent simultaneous processing. We present practical system designs that support cavity-mode multiplexing with up to 50 modes, enabling rapid mid-circuit syndrome extraction and significantly enhancing entanglement distribution rates between remote atom arrays. This approach offers a scalable solution to core challenges in neutral atom arrays, advancing the development of practical quantum technologies.
Neutral atom arrays have emerged as a leading platform for scalable quantum information processing, offering reconfigurable geometry, strong interactions, and high-fidelity control. While encoding quantum information in atomic qubits provides multiple natural advantages, information can be lost through mechanisms such as atom loss, depolarization, and decoherence, necessitating the need for quantum error correction. However, the processes underlying error correction, including measurement and gate operations, can themselves induce atom loss, ultimately limiting the achievable computational circuit depth. This thesis presents the design and realization of a large-scale neutral atom array quantum architecture capable of continuous coherent operation. By replenishing fresh atomic qubits during operation, the system solves a key bottleneck to scalability in space and time. We further show that, through careful system design, quantum coherence can be preserved while introducing new atoms and initializing them as qubits. We discuss the architectural and physical considerations underlying this approach and demonstrate a platform comprising more than 3,000 reconfigurable qubits. These results establish a pathway toward persistent quantum operation and have broad implications for quantum computing, quantum simulation, and quantum metrology.