Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2511.17470

Fast and Continuous Detection of Single Microwave Photons via Photo-assisted Quasiparticle Tunneling to a Superconducting Island

J. Basset, Ognjen Stanisavljević, Julien Gabelli, M. Aprili, Jérôme Estève

Published Nov 21, 2025• 0 citations
arXivHTMLPDF

Abstract

We demonstrate a single-photon detector operating in the microwave domain, based on photo-assisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10\% detection efficiency with sub \SI{50}{\ns} time resolution and short dead time ($\sim \SI{1}{\us}$), for microwave photons at \SI{10}{\GHz}. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light--matter coupling, crucial to photon to quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics and mesoscopic physics.

DOI
10.48550/arxiv.2511.17470

Related papers

Efficient Microwave Photon-to-Electron Conversion in a High-Impedance Quantum Circuit

Ognjen Stanisavljević, Jean-Côme Philippe, Julien Gabelli +3 more

We demonstrate a single-photon detector operating in the microwave domain, based on photoassisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10% detection efficiency with sub 50 ns time resolution and short dead time (∼1 μs), for microwave photons at 10 GHz. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light-matter coupling, crucial to photon-to-quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time-resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics, and mesoscopic physics.

arXiv:2312.14065•Physical Review Letters•Aug 16, 2024•15 citations

Always-on, highly efficient microwave photon detector based on a superconducting artificial molecule

Vyom Kulkarni, Mohammed Ali Aamir, Simon Sundelin +1 more

Efficient detection of single microwave photons is a key capability for emerging quantum technologies. Yet, it remains far less developed than its optical domain counterpart. Realizing detectors that simultaneously achieve high efficiency, low dark counts, and continuous operation has proved challenging. Existing detectors operate cyclically, forcing a trade-off between efficiency and duty cycle. Here, we demonstrate a continuously operated microwave single-photon detector based on a superconducting artificial molecule. In our scheme, an incoming photon is captured by a bright state of the molecule and then transferred to a long-lived dark state via a driven-dissipative process. Photon ``clicks'' are revealed as quantum jumps in the continuously monitored dark state. We observe a cyclic detection efficiency of $0.73$, and a continuous detection efficiency of $0.47$ over a $5\,\mathrm{MHz}$ instantaneous bandwidth, with a $1\,μ\mathrm{s}$ temporal resolution and a $15\,μ\mathrm{s}$ dead time. By overcoming the trade-off between efficiency and duty cycle, this approach establishes continuous microwave photon detection for quantum sensing, quantum thermodynamics, and fundamental physics.

quant-pharXiv:2608.12972•Aug 14, 2026•0 citations

Direct detection of quasiparticle tunneling with a charge-sensitive superconducting sensor coupled to a waveguide

Kazi Rafsanjani Amin, Axel Martin Eriksson, Mikael Kervinen +3 more

Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and $7~\rm{s}^{-1}$, depending on the average occupation of the detector qubit, and achieve a temporal resolution below $10~μ\rm{s}$ without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.

arXiv:2404.01277•Apr 1, 2024•1 citation

The single-electron transistor as an ultrasensitive microwave detector

J. M. Hergenrother, Jia Grace Lu, M. Tinkham

We have measured single-electron tunneling transistors with superconducting islands and conclude that they may be used as ultrasensitive detectors of microwave radiation for frequencies /spl ges/80 GHz. These devices contain a small superconducting Al island that is weakly coupled to a bias circuit through two small-capacitance tunnel junctions and a capacitive gate. At low bias voltages and temperatures, a single quasiparticle may only be introduced to the island through photon-assisted tunneling. Once this occurs, the quasiparticle is trapped on the island for /spl sim/1 /spl mu/s because it takes a relatively long time for this specific quasiparticle to tunnel off. While it is trapped, charge is transported through the system two electrons at a time. Since the photon-assisted transition merely switches the detector current on, this device is not limited to one electron tunneled through the system per absorbed photon. Measurements indicate that at least 100 electrons can tunnel for every absorbed photon, which corresponds to a noise-equivalent power of 3/spl times/10/sup -20/ W//spl radic/Hz at 80 GHz if the current is measured with a commercial current amplifier.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•7 citations

Tunable high-efficiency microwave photon detector based on a double quantum dot coupled to a superconducting high-impedance cavity

Fabian Oppliger, Wonjin Jang, Aldo Tarascio +6 more

High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.

arXiv:2506.19828•Science Advances•Apr 3, 2026•4 citations

Tunable high-efficiency microwave photon detector based on a double quantum dot coupled to a superconducting high-impedance cavity

Fabian Oppliger, Wonjin Jang, Aldo Tarascio +6 more

High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.

•Apr 1, 2026•0 citations
We demonstrate a single-photon detector operating in the microwave domain, based on photo-assisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10% detection efficiency with sub \SI{50}{\ns} time resolution and short dead time (∼\SI1\us\sim \SI{1}{\us}∼\SI1\us), for microwave photons at \SI{10}{\GHz}. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light--matter coupling, crucial to photon to quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics and mesoscopic physics.
We demonstrate a single-photon detector operating in the microwave domain, based on photoassisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10% detection efficiency with sub 50 ns time resolution and short dead time (∼1 μs), for microwave photons at 10 GHz. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light-matter coupling, crucial to photon-to-quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time-resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics, and mesoscopic physics.
Efficient detection of single microwave photons is a key capability for emerging quantum technologies. Yet, it remains far less developed than its optical domain counterpart. Realizing detectors that simultaneously achieve high efficiency, low dark counts, and continuous operation has proved challenging. Existing detectors operate cyclically, forcing a trade-off between efficiency and duty cycle. Here, we demonstrate a continuously operated microwave single-photon detector based on a superconducting artificial molecule. In our scheme, an incoming photon is captured by a bright state of the molecule and then transferred to a long-lived dark state via a driven-dissipative process. Photon ``clicks'' are revealed as quantum jumps in the continuously monitored dark state. We observe a cyclic detection efficiency of 0.730.730.73, and a continuous detection efficiency of 0.470.470.47 over a 5 MHz5\,\mathrm{MHz}5MHz instantaneous bandwidth, with a 1 μs1\,μ\mathrm{s}1μs temporal resolution and a 15 μs15\,μ\mathrm{s}15μs dead time. By overcoming the trade-off between efficiency and duty cycle, this approach establishes continuous microwave photon detection for quantum sensing, quantum thermodynamics, and fundamental physics.
Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and 7 s−17~\rm{s}^{-1}7 s−1, depending on the average occupation of the detector qubit, and achieve a temporal resolution below 10 μs10~μ\rm{s}10 μs without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.
We have measured single-electron tunneling transistors with superconducting islands and conclude that they may be used as ultrasensitive detectors of microwave radiation for frequencies /spl ges/80 GHz. These devices contain a small superconducting Al island that is weakly coupled to a bias circuit through two small-capacitance tunnel junctions and a capacitive gate. At low bias voltages and temperatures, a single quasiparticle may only be introduced to the island through photon-assisted tunneling. Once this occurs, the quasiparticle is trapped on the island for /spl sim/1 /spl mu/s because it takes a relatively long time for this specific quasiparticle to tunnel off. While it is trapped, charge is transported through the system two electrons at a time. Since the photon-assisted transition merely switches the detector current on, this device is not limited to one electron tunneled through the system per absorbed photon. Measurements indicate that at least 100 electrons can tunnel for every absorbed photon, which corresponds to a noise-equivalent power of 3/spl times/10/sup -20/ W//spl radic/Hz at 80 GHz if the current is measured with a commercial current amplifier.>
High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.
High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.