© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2404.01277

Direct detection of quasiparticle tunneling with a charge-sensitive superconducting sensor coupled to a waveguide

Kazi Rafsanjani Amin, Axel Martin Eriksson, Mikael Kervinen, Andersson, Linus, Robert Rehammar, Simone Gasparinetti

Published Apr 1, 2024• 1 citation

Abstract

Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and $7~\rm{s}^{-1}$, depending on the average occupation of the detector qubit, and achieve a temporal resolution below $10~μ\rm{s}$ without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.

DOI: 10.48550/arxiv.2404.01277

Related papers

Fast and Continuous Detection of Single Microwave Photons via Photo-assisted Quasiparticle Tunneling to a Superconducting Island

J. Basset, Ognjen Stanisavljević, Julien Gabelli +2 more

We demonstrate a single-photon detector operating in the microwave domain, based on photo-assisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10\% detection efficiency with sub \SI{50}{\ns} time resolution and short dead time ($\sim \SI{1}{\us}$), for microwave photons at \SI{10}{\GHz}. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light--matter coupling, crucial to photon to quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics and mesoscopic physics.

arXiv:2511.17470•Nov 21, 2025•0 citations

Real-time detection of correlated quasiparticle tunneling events in a multi-qubit superconducting device

Simon Sundelin, Linus Andersson, Hampus Brunander +1 more

Quasiparticle tunneling events are a source of decoherence and correlated errors in superconducting circuits. Understanding and ultimately mitigating these errors calls for real-time detection of quasiparticle tunneling events on individual devices. In this work, we simultaneously detect quasiparticle tunneling events in two co-housed, charge-sensitive transmons coupled to a common waveguide. We measure background quasiparticle tunneling rates at the single-hertz level, with temporal resolution of tens of microseconds. Using time-tagged coincidence analysis, we show that individual events are uncorrelated across devices, whereas burst episodes occur about once per minute and are largely correlated. These bursts have a characteristic lifetime of 7 ms and induce a thousand-fold increase in the quasiparticle tunneling rate across both devices. In addition, we identify a rarer subset of bursts which are accompanied by a shift in the offset charge, at approximately one event per hour. Our results establish a practical and extensible method to identify quasiparticle bursts in superconducting circuits, as well as their correlations and spatial structure, advancing routes to suppress correlated errors in superconducting quantum processors.

quant-pharXiv:2602.01945•Physical Review Applied•Feb 3, 2026•0 citations

A First Demonstration of the SQUAT Detector Architecture: Direct Measurement of Resonator-Free Charge-Sensitive Transmons

H. Magoon, T. Aralis, T. Dyson +18 more

The Superconducting Quasiparticle-Amplifying Transmon (SQUAT) is a new sensor architecture for THz (meV) detection based on a weakly charge-sensitive transmon directly coupled to a transmission line. In such devices, energy depositions break Cooper pairs in the qubit capacitor islands, generating quasiparticles. Quasiparticles that tunnel across the Josephson junction change the transmon qubit parity, generating a measurable signal. In this paper, we present the design of first-generation SQUATs and demonstrate an architecture validation. We summarize initial characterization measurements made with prototype devices, comment on background sources that influence the observed parity-switching rate, and present experimental results showing simultaneous detection of charge and quasiparticle signals using aluminum-based SQUATs.

physics.ins-detCross-listedarXiv:2601.16261•Jan 26, 2026•0 citations

Detecting parity effect in a superconducting device in the presence of parity switches

E. T. Mannila, V. F. Maisi, Hung Q. Nguyen +2 more

We present a superconducting device showing a clear parity effect in the number of electrons, even when there is, on average, a single nonequilibrium quasiparticle present and the parity of the island switches due to quasiparticles tunneling in and out of the device at rates on the order of 100 Hz. We detect the switching by monitoring in real time the charge state of a superconducting island connected to normal leads by tunnel junctions. The quasiparticles are created by Cooper pairs breaking on the island at a rate of a few kilohertz. We demonstrate that the pair breaking is caused by the backaction of the single-electron transistor used as a charge detector. With sufficiently low probing currents, our superconducting island is free of quasiparticles 97% of the time.

arXiv:1807.01733•Physical review. B./Physical review. B•Jul 8, 2019•15 citations

Revealing charge-tunneling processes between a quantum dot and a superconducting island through gate sensing

Jasper van Veen, Damaz de Jong, Lin Han +5 more

We report direct detection of charge tunneling between a quantum dot and a superconducting island through radio-frequency gate sensing. We are able to resolve spin-dependent quasiparticle tunneling as well as two-particle tunneling involving Cooper pairs. The quantum dot can act as an RF-only sensor to characterize the superconductor addition spectrum, enabling us to access subgap states without transport. Our results provide guidance for future dispersive parity measurements of Majorana modes, which can be realized by detecting the parity-dependent tunneling between dots and islands.

arXiv:1903.09066•Physical review. B./Physical review. B•Nov 8, 2019•19 citations

Efficient Microwave Photon-to-Electron Conversion in a High-Impedance Quantum Circuit

Ognjen Stanisavljević, Jean-Côme Philippe, Julien Gabelli +3 more

We demonstrate a single-photon detector operating in the microwave domain, based on photoassisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10% detection efficiency with sub 50 ns time resolution and short dead time (∼1 μs), for microwave photons at 10 GHz. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light-matter coupling, crucial to photon-to-quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time-resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics, and mesoscopic physics.

arXiv:2312.14065•Physical Review Letters•Aug 16, 2024•15 citations

Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and

7~\rm{s}^{-1}

, depending on the average occupation of the detector qubit, and achieve a temporal resolution below

10~μ\rm{s}

without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.

We demonstrate a single-photon detector operating in the microwave domain, based on photo-assisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10\% detection efficiency with sub \SI{50}{\ns} time resolution and short dead time ($\sim \SI{1}{\us}$), for microwave photons at \SI{10}{\GHz}. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light--matter coupling, crucial to photon to quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics and mesoscopic physics.

Quasiparticle tunneling events are a source of decoherence and correlated errors in superconducting circuits. Understanding and ultimately mitigating these errors calls for real-time detection of quasiparticle tunneling events on individual devices. In this work, we simultaneously detect quasiparticle tunneling events in two co-housed, charge-sensitive transmons coupled to a common waveguide. We measure background quasiparticle tunneling rates at the single-hertz level, with temporal resolution of tens of microseconds. Using time-tagged coincidence analysis, we show that individual events are uncorrelated across devices, whereas burst episodes occur about once per minute and are largely correlated. These bursts have a characteristic lifetime of 7 ms and induce a thousand-fold increase in the quasiparticle tunneling rate across both devices. In addition, we identify a rarer subset of bursts which are accompanied by a shift in the offset charge, at approximately one event per hour. Our results establish a practical and extensible method to identify quasiparticle bursts in superconducting circuits, as well as their correlations and spatial structure, advancing routes to suppress correlated errors in superconducting quantum processors.

The Superconducting Quasiparticle-Amplifying Transmon (SQUAT) is a new sensor architecture for THz (meV) detection based on a weakly charge-sensitive transmon directly coupled to a transmission line. In such devices, energy depositions break Cooper pairs in the qubit capacitor islands, generating quasiparticles. Quasiparticles that tunnel across the Josephson junction change the transmon qubit parity, generating a measurable signal. In this paper, we present the design of first-generation SQUATs and demonstrate an architecture validation. We summarize initial characterization measurements made with prototype devices, comment on background sources that influence the observed parity-switching rate, and present experimental results showing simultaneous detection of charge and quasiparticle signals using aluminum-based SQUATs.

We present a superconducting device showing a clear parity effect in the number of electrons, even when there is, on average, a single nonequilibrium quasiparticle present and the parity of the island switches due to quasiparticles tunneling in and out of the device at rates on the order of 100 Hz. We detect the switching by monitoring in real time the charge state of a superconducting island connected to normal leads by tunnel junctions. The quasiparticles are created by Cooper pairs breaking on the island at a rate of a few kilohertz. We demonstrate that the pair breaking is caused by the backaction of the single-electron transistor used as a charge detector. With sufficiently low probing currents, our superconducting island is free of quasiparticles 97% of the time.

We report direct detection of charge tunneling between a quantum dot and a superconducting island through radio-frequency gate sensing. We are able to resolve spin-dependent quasiparticle tunneling as well as two-particle tunneling involving Cooper pairs. The quantum dot can act as an RF-only sensor to characterize the superconductor addition spectrum, enabling us to access subgap states without transport. Our results provide guidance for future dispersive parity measurements of Majorana modes, which can be realized by detecting the parity-dependent tunneling between dots and islands.

We demonstrate a single-photon detector operating in the microwave domain, based on photoassisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10% detection efficiency with sub 50 ns time resolution and short dead time (∼1 μs), for microwave photons at 10 GHz. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light-matter coupling, crucial to photon-to-quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time-resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics, and mesoscopic physics.