Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.01945 · Physical Review Applied

Real-time detection of correlated quasiparticle tunneling events in a multi-qubit superconducting device

Simon Sundelin, Linus Andersson, Hampus Brunander, Simone Gasparinetti

quant-phSubmitted Feb 2, 2026• Announced Feb 3, 2026• 0 citations
arXivHTMLPDF

Abstract

Quasiparticle tunneling events are a source of decoherence and correlated errors in superconducting circuits. Understanding and ultimately mitigating these errors calls for real-time detection of quasiparticle tunneling events on individual devices. In this work, we simultaneously detect quasiparticle tunneling events in two co-housed, charge-sensitive transmons coupled to a common waveguide. We measure background quasiparticle tunneling rates at the single-hertz level, with temporal resolution of tens of microseconds. Using time-tagged coincidence analysis, we show that individual events are uncorrelated across devices, whereas burst episodes occur about once per minute and are largely correlated. These bursts have a characteristic lifetime of 7 ms and induce a thousand-fold increase in the quasiparticle tunneling rate across both devices. In addition, we identify a rarer subset of bursts which are accompanied by a shift in the offset charge, at approximately one event per hour. Our results establish a practical and extensible method to identify quasiparticle bursts in superconducting circuits, as well as their correlations and spatial structure, advancing routes to suppress correlated errors in superconducting quantum processors.

Related papers

Direct detection of quasiparticle tunneling with a charge-sensitive superconducting sensor coupled to a waveguide

Kazi Rafsanjani Amin, Axel Martin Eriksson, Mikael Kervinen +3 more

Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and $7~\rm{s}^{-1}$, depending on the average occupation of the detector qubit, and achieve a temporal resolution below $10~μ\rm{s}$ without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.

arXiv:2404.01277•Apr 1, 2024•1 citation

Millisecond charge-parity fluctuations and induced decoherence in a superconducting transmon qubit

Diego Ristè, Cornelis Christiaan Bultink, M. J. Tiggelman +3 more

The tunnelling of quasiparticles across Josephson junctions in superconducting quantum circuits is an intrinsic decoherence mechanism for qubit degrees of freedom. Understanding the limits imposed by quasiparticle tunnelling on qubit relaxation and dephasing is of theoretical and experimental interest, particularly as improved understanding of extrinsic mechanisms has allowed crossing the 100 microsecond mark in transmon-type charge qubits. Here, by integrating recent developments in high-fidelity qubit readout and feedback control in circuit quantum electrodynamics, we transform a state-of-the-art transmon into its own real-time charge-parity detector. We directly measure the tunnelling of quasiparticles across the single junction and isolate the contribution of this tunnelling to qubit relaxation and dephasing, without reliance on theory. The millisecond timescales measured demonstrate that quasiparticle tunnelling does not presently bottleneck transmon qubit coherence, leaving room for yet another order of magnitude increase. Superconducting circuits are promising for quantum computing, but quasiparticle tunnelling across Josephson junctions introduces qubit decoherence. Ristè et al. convert a transmon qubit into its own real-time quasiparticle tunnelling detector and accurately measure induced decoherence in the millisecond range.

arXiv:1212.5459•Nature Communications•May 28, 2013•257 citations

Superconducting qubit decoherence correlated with detected radiation events

A. R. Castelli, K. M. Beck, L. D. H. Alegria +6 more

Most quantum error correction (QEC) protocols for superconducting qubits assume spatially and temporally uncorrelated decoherence events; however, recent evidence suggests that cosmic radiation induces spatially correlated errors. We present a platform that sandwiches a superconducting transmon qubit between two microwave kinetic inductance detector (MKID) arrays, enabling real-time detection of radiation-induced phonon bursts. By synchronizing MKID event detection with single-shot measurements of qubit energy relaxation ($T_1$) and phase coherence ($T_2$), we observe statistically significant reductions in both $T_1$ and $T_2$-up to 30.5%-immediately following dual MKID events attributed to penetrating muons. Our findings directly link radiating events to correlated qubit decoherence. Furthermore, our experimental platform provides a foundation for systematic studies of radiation effects, the development of shielding and mitigation techniques, and the refinement of error-correction algorithms tailored to correlated noise sources.

quant-pharXiv:2512.18171•Dec 23, 2025•0 citations

Cosmic-ray-induced correlated errors in superconducting qubit array

Xuegang Li, Junhua Wang, Yao-Yao Jiang +15 more

Correlated errors may devastate quantum error corrections that are necessary for the realization of fault-tolerant quantum computation. Recent experiments with superconducting qubits indicate that they can arise from quasiparticle (QP) bursts induced by cosmic-ray muons and γ-rays. Here, we use charge-parity jump and bit flip for monitoring QP bursts and two muon detectors in the dilution refrigerator for detecting muon events. We directly observe QP bursts leading to correlated errors that are induced solely by muons and separate the contributions of muons and γ-rays. We further investigate the dynamical process of QP burst and the impact of QP trapping on correlated errors and particle detection. The proposed method, which monitors multiqubit simultaneous charge-parity jumps, has high sensitivity to QP bursts and may find applications for the detection of cosmic-ray particles, low-mass dark matter, and far-infrared photons. The correlated errors in superconducting qubits have been linked to high-energy particle impacts from cosmic rays, but a direct observation has been lacking. Here, the authors measure the quasiparticle bursts and correlated errors and separate the contributions of cosmic-ray muons and γ-rays in a 63-qubit processor.

arXiv:2402.04245•Nature Communications•May 20, 2025•25 citations

Superconducting-qubit decoherence correlated with detected radiation events

Anonymous, Kristin M. Beck, Loren D. Alegria +6 more

Most quantum error-correction (QEC) protocols for superconducting qubits assume spatially and temporally uncorrelated decoherence events; however, recent evidence suggests that cosmic radiation induces spatially correlated errors. We present a platform that sandwiches a superconducting transmon qubit between two microwave kinetic inductance detector (MKID) arrays, enabling real-time detection of radiation-induced phonon bursts. By synchronizing MKID event detection with single-shot measurements of qubit energy relaxation ( T 1 ) and phase coherence ( T 2 ), we observe statistically significant reductions in both T 1 and T 2 —up to 30.5%—immediately following dual MKID events attributed to penetrating muons. Our findings directly link radiating events to correlated qubit decoherence. Furthermore, our experimental platform provides a foundation for systematic studies of radiation effects, the development of shielding and mitigation techniques, and the refinement of error-correction algorithms tailored to correlated noise sources.

Physical Review Applied•Aug 13, 2026•0 citations

Distinguishing types of correlated errors in superconducting qubits

Hannah P. Binney, H. Douglas Pinckney, Kate Azar +15 more

Errors in superconducting qubits that are correlated in time and space can pose problems for quantum error correction codes. Radiation from cosmic and terrestrial sources can increase the quasiparticle (QP) density in a superconducting qubit device, resulting in an increased rate of QPs tunneling across proximal Josephson junctions (JJs) and causing correlated errors. Mechanical vibrations, such as those induced by the pulse tube (PT) in a dry dilution refrigerator, are also a known source of correlated errors. We measure two types of errors in the same device, linking the first to ionizing radiation and the second to PT operation. We present a method for distinguishing these two types of errors by their temporal, spatial, and frequency domain features, enabling physically motivated error-mitigation strategies. We also present accelerometer data to study the correlation between PT-induced vibrations and the errors. We measure arrays of transmon qubits where the difference in superconducting gap across the JJ is less than the qubit energy, as well as those where the gap is greater than the qubit energy, which has been shown to mitigate radiation-induced errors. The rate of both types of errors is reduced in these latter devices, suggesting that gap engineering is also protective against PT-induced errors.

quant-pharXiv:2603.16494•Physical Review Applied•Mar 18, 2026•0 citations
Quasiparticle tunneling events are a source of decoherence and correlated errors in superconducting circuits. Understanding and ultimately mitigating these errors calls for real-time detection of quasiparticle tunneling events on individual devices. In this work, we simultaneously detect quasiparticle tunneling events in two co-housed, charge-sensitive transmons coupled to a common waveguide. We measure background quasiparticle tunneling rates at the single-hertz level, with temporal resolution of tens of microseconds. Using time-tagged coincidence analysis, we show that individual events are uncorrelated across devices, whereas burst episodes occur about once per minute and are largely correlated. These bursts have a characteristic lifetime of 7 ms and induce a thousand-fold increase in the quasiparticle tunneling rate across both devices. In addition, we identify a rarer subset of bursts which are accompanied by a shift in the offset charge, at approximately one event per hour. Our results establish a practical and extensible method to identify quasiparticle bursts in superconducting circuits, as well as their correlations and spatial structure, advancing routes to suppress correlated errors in superconducting quantum processors.
Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and 7 s−17~\rm{s}^{-1}7 s−1, depending on the average occupation of the detector qubit, and achieve a temporal resolution below 10 μs10~μ\rm{s}10 μs without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.
The tunnelling of quasiparticles across Josephson junctions in superconducting quantum circuits is an intrinsic decoherence mechanism for qubit degrees of freedom. Understanding the limits imposed by quasiparticle tunnelling on qubit relaxation and dephasing is of theoretical and experimental interest, particularly as improved understanding of extrinsic mechanisms has allowed crossing the 100 microsecond mark in transmon-type charge qubits. Here, by integrating recent developments in high-fidelity qubit readout and feedback control in circuit quantum electrodynamics, we transform a state-of-the-art transmon into its own real-time charge-parity detector. We directly measure the tunnelling of quasiparticles across the single junction and isolate the contribution of this tunnelling to qubit relaxation and dephasing, without reliance on theory. The millisecond timescales measured demonstrate that quasiparticle tunnelling does not presently bottleneck transmon qubit coherence, leaving room for yet another order of magnitude increase. Superconducting circuits are promising for quantum computing, but quasiparticle tunnelling across Josephson junctions introduces qubit decoherence. Ristè et al. convert a transmon qubit into its own real-time quasiparticle tunnelling detector and accurately measure induced decoherence in the millisecond range.
Most quantum error correction (QEC) protocols for superconducting qubits assume spatially and temporally uncorrelated decoherence events; however, recent evidence suggests that cosmic radiation induces spatially correlated errors. We present a platform that sandwiches a superconducting transmon qubit between two microwave kinetic inductance detector (MKID) arrays, enabling real-time detection of radiation-induced phonon bursts. By synchronizing MKID event detection with single-shot measurements of qubit energy relaxation (T1T_1T1​) and phase coherence (T2T_2T2​), we observe statistically significant reductions in both T1T_1T1​ and T2T_2T2​-up to 30.5%-immediately following dual MKID events attributed to penetrating muons. Our findings directly link radiating events to correlated qubit decoherence. Furthermore, our experimental platform provides a foundation for systematic studies of radiation effects, the development of shielding and mitigation techniques, and the refinement of error-correction algorithms tailored to correlated noise sources.
Correlated errors may devastate quantum error corrections that are necessary for the realization of fault-tolerant quantum computation. Recent experiments with superconducting qubits indicate that they can arise from quasiparticle (QP) bursts induced by cosmic-ray muons and γ-rays. Here, we use charge-parity jump and bit flip for monitoring QP bursts and two muon detectors in the dilution refrigerator for detecting muon events. We directly observe QP bursts leading to correlated errors that are induced solely by muons and separate the contributions of muons and γ-rays. We further investigate the dynamical process of QP burst and the impact of QP trapping on correlated errors and particle detection. The proposed method, which monitors multiqubit simultaneous charge-parity jumps, has high sensitivity to QP bursts and may find applications for the detection of cosmic-ray particles, low-mass dark matter, and far-infrared photons. The correlated errors in superconducting qubits have been linked to high-energy particle impacts from cosmic rays, but a direct observation has been lacking. Here, the authors measure the quasiparticle bursts and correlated errors and separate the contributions of cosmic-ray muons and γ-rays in a 63-qubit processor.
Most quantum error-correction (QEC) protocols for superconducting qubits assume spatially and temporally uncorrelated decoherence events; however, recent evidence suggests that cosmic radiation induces spatially correlated errors. We present a platform that sandwiches a superconducting transmon qubit between two microwave kinetic inductance detector (MKID) arrays, enabling real-time detection of radiation-induced phonon bursts. By synchronizing MKID event detection with single-shot measurements of qubit energy relaxation ( T 1 ) and phase coherence ( T 2 ), we observe statistically significant reductions in both T 1 and T 2 —up to 30.5%—immediately following dual MKID events attributed to penetrating muons. Our findings directly link radiating events to correlated qubit decoherence. Furthermore, our experimental platform provides a foundation for systematic studies of radiation effects, the development of shielding and mitigation techniques, and the refinement of error-correction algorithms tailored to correlated noise sources.
Errors in superconducting qubits that are correlated in time and space can pose problems for quantum error correction codes. Radiation from cosmic and terrestrial sources can increase the quasiparticle (QP) density in a superconducting qubit device, resulting in an increased rate of QPs tunneling across proximal Josephson junctions (JJs) and causing correlated errors. Mechanical vibrations, such as those induced by the pulse tube (PT) in a dry dilution refrigerator, are also a known source of correlated errors. We measure two types of errors in the same device, linking the first to ionizing radiation and the second to PT operation. We present a method for distinguishing these two types of errors by their temporal, spatial, and frequency domain features, enabling physically motivated error-mitigation strategies. We also present accelerometer data to study the correlation between PT-induced vibrations and the errors. We measure arrays of transmon qubits where the difference in superconducting gap across the JJ is less than the qubit energy, as well as those where the gap is greater than the qubit energy, which has been shown to mitigate radiation-induced errors. The rate of both types of errors is reduced in these latter devices, suggesting that gap engineering is also protective against PT-induced errors.