Nanophotonic light–matter interfaces hold great promise for quantum technologies. Enhancing local electromagnetic fields, they enable highly efficient detectors, can help realize optically connected processors, or serve as quantum repeaters. In-situ fiber-coupling at sub-Kelvin temperatures, as required for testing and development of new devices, proves challenging as suitable cryogenic microscopes are not readily available. Here, we report on a robust and versatile confocal imaging system integrated in a dilution refrigerator, enabling high-resolution visualization of nanophotonic structures on a transparent diamond substrate. Our imaging system achieves a resolution of 1.1 μm and a field-of-view of 2.5 mm. The system requires no movable parts at cryogenic temperatures and features a large working distance, thereby allowing optical and microwave probe access, as well as direct anchoring of temperature sensitive samples to a cold finger setup, needed for applications with high thermal load. This system facilitates the development of scalable, integrated quantum optics technology, an imperative for research on large scale quantum networks.
Nanophotonic light–matter interfaces hold great promise for quantum technologies. Enhancing local electromagnetic fields, they enable highly efficient detectors, can help realize optically connected processors, or serve as quantum repeaters. In-situ fiber-coupling at sub-Kelvin temperatures, as required for testing and development of new devices, proves challenging as suitable cryogenic microscopes are not readily available. Here, we report on a robust and versatile confocal imaging system integrated in a dilution refrigerator, enabling high-resolution visualization of nanophotonic structures on a transparent diamond substrate. Our imaging system achieves a resolution of 1.1 μm and a field-of-view of 2.5 mm. The system requires no movable parts at cryogenic temperatures and features a large working distance, thereby allowing optical and microwave probe access, as well as direct anchoring of temperature sensitive samples to a cold finger setup, needed for applications with high thermal load. This system facilitates the development of scalable, integrated quantum optics technology, an imperative for research on large scale quantum networks.
Cryogenic confocal microscopy is a powerful method for studying solid state quantum devices such as single photon sources and optically controlled qubits. While the vast majority of such studies have been conducted at temperatures of a few Kelvin, experiments involving fragile quantum effects often require lower operating temperatures. To also allow for electrical dynamic control, microwave connectivity is required. For polarization-sensitive studies, free space optical access is advantageous compared to fiber coupling. Here we present a confocal microscope in a dilution refrigerator providing all the above features at temperatures below 100 mK. The installed high frequency cabling meets the requirements for state of the art spin qubit experiments. As another unique advantage of our system, the sample fitting inside a large puck can be exchanged while keeping the cryostat cold with minimal realignment. Assessing the performance of the instrument, we demonstrate confocal imaging, sub-nanosecond modulation of the emission wavelength of a suitable sample and an electron temperature of 76 mK. While the instrument was constructed primarily with the development of optical interfaces to electrically controlled qubits in mind, it can be used for many experiments involving quantum transport, solid state quantum optics and microwave-optical transducers.
Cryogenic confocal microscopy is a powerful method for studying solid state quantum devices such as single photon sources and optically controlled qubits. While the vast majority of such studies have been conducted at temperatures of a few Kelvin, experiments involving fragile quantum effects often require lower operating temperatures. To also allow for electrical dynamic control, microwave connectivity is required. For polarization-sensitive studies, free space optical access is advantageous compared to fiber coupling. Here we present a confocal microscope in a dilution refrigerator providing all the above features at temperatures below 100 mK. The installed high frequency cabling meets the requirements for state-of-the-art spin qubit experiments. As another unique advantage of our system, the sample fitting inside a large puck can be exchanged while keeping the cryostat cold with minimal realignment. Assessing the performance of the instrument, we demonstrate confocal imaging, sub-nanosecond modulation of the emission wavelength of a suitable sample, and an electron temperature of 76 mK. While the instrument was constructed primarily with the development of optical interfaces to electrically controlled qubits in mind, it can be used for many experiments involving quantum transport, solid state quantum optics, and microwave-optical transducers.
We present the design and operation of a fiber-based cryogenic confocal microscope. It is designed as a compact cold-finger that fits inside the bore of a superconducting magnet, and which is a modular unit that can be easily swapped between use in a dilution refrigerator and other cryostats. We aimed at application in quantum optical experiments with electron spins in semiconductors and the design has been optimized for driving with and detection of optical fields with well-defined polarizations. This was implemented with optical access via a polarization maintaining fiber together with Voigt geometry at the cold finger, which circumvents Faraday rotations in the optical components in high magnetic fields. Our unit is versatile for use in experiments that measure photoluminescence, reflection, or transmission, as we demonstrate with a quantum optical experiment with an ensemble of donor-bound electrons in a thin GaAs film.
Luminescent lattice defects (so called “color centers”) in diamond provide a robust, solid-state architecture for exploring quantum optics, with many facilitating direct access to highly coherent electron and nuclear spins. The past two decades have seen tremendous advances in our ability to prepare and control the quantum states of these atom-like systems. For instance, demonstrations that leverage the diamond nitrogen vacancy (NV–) center as a spin-photon interface have included the generation of indistinguishable photons, a quantum bit memory exceeding 1 second, entanglement of two distance solid-state qubits, and deterministic long distance quantum teleportation. While diamond color centers are an attractive platform for scalable quantum information processing, the diamond solid-state matrix, by its very nature, inhibits efficient photon collection into either free-space or fiber-optical systems. Due to its large refractive index, emitted photons are inevitably trapped within the diamond crystal by total internal reflection, limiting count rates and overall scalability of information processing via quantum optical protocols. To this end, there has been significant progress towards integrating individual diamond color centers within well-defined radiation channels: namely, those provided by monolithic diamond nanophotonic networks. Currently, on-chip low loss (~ few db/cm) diamond waveguide networks are available, as well as key passive photonic elements like micron scale ring and disk resonators and photonic crystal cavities, with high optical quality (Q) factors. Specifically, we recently demonstrated a scalable ‘angled-etching’ nanofabrication method for realizing nanophotonic networks starting from bulk single-crystal diamond substrates (MJ Burek et al., Nano Letters 2012, MJ Burek et al., Nat Comm. 2014). Angled-etching employs anisotropic oxygen-based plasma etching at an oblique angle to the substrate surface, resulting in suspended optical structures with triangular cross-sections. Using this approach, we demonstrated high Q-factor (> 10^5) optical nanocavities fabricated in bulk single-crystal diamond, operating over a wide wavelength range (visible to telecom). Beyond isolated photonic devices, we have further developed free-standing angled-etched waveguides which efficiently route photons between diamond optical nanocavities, while maintaining physical support through attachment to the bulk substrate. Although on-chip diamond nanophotonics realized by angled-etching continue to mature, efficient off-chip optical coupling schemes which provide near seamless transition of photons on-chip into commercial optical fibers remain an outstanding challenge. This is especially pertinent in applications involving single photons, such as quantum optics with diamond color centers. Herein, we demonstrate a high efficiency fiber-optical interface with aforementioned on-chip diamond nanophotonic networks, achieving > 90% power coupling at both telecom and visible wavelengths. The coupling scheme utilizes a single mode optical fiber, with one end fabricated into a conical taper, to adiabatically transition guided light between on-chip tapered diamond waveguides and off-chip optical fiber networks. Additionally, we develop techniques to robustly pigtail single-mode fibers with diamond waveguide couplers, yielding a packaged technology that may potentially enable deployment in harsh environments, including vacuum, sub-Kelvin cryogenics, or even liquid/biological environments. With these newly developed optical integration schemes, single-crystal diamond is now a viable integrated nanophotonics platform, servicing a range of applications, from non-linear optics and chemical sensing, to quantum science and cavity optomechanics.
Toward the realization of a large-scale fault-tolerant quantum computer, the development of microwave-to-optical quantum transducers has been actively underway over the past 10 years. Optical connections between refrigerators enable wide-bandwidth, flexible, room-temperature transmission of quantum information, extending the computing capacity of superconducting quantum processors. In this research, we explore the possibility of a diamond color-center-based quantum interface. We report the current status of developments in our fiber-integrated nanophotonic diamond devices.
In cold atom experiments, high resolution imaging systems have been used to extract in-situ density information when studying quantum gases, which is one of the hot topics in this field. Such a system is usually called “quantum-gas microscope”. In order to achieve a long working distance and large magnification, high resolution imaging of cold atoms through a vacuum window usually requires a long distance between the atoms and the camera. However, due to space limitation caused by a large number of nearby optical elements, it may be difficult to realize a long imaging system, which is a common case in cold atom experiments. Herein we present an imaging system that can achieve a short distance between the atoms and the image plane with diffraction-limited 1 μm resolution and 50 magnification. The telephoto lens design is adopted to reduce the back focal length and enhance the pointing stability of the imaging lens. The system is optimized at an operating wavelength of 767 nm and corrects aberrations induced by a 5-mm-thick silica vacuum window. At a working distance of 32 mm, a diffraction-limited field of view of 408 μm is obtained. The simulation result shows that by changing the air space between lenses, our design operates across a wide range of window thicknesses (0–15 mm), which makes it robust enough to be used in typical laboratories. This compact imaging system is made from commercial on-shelf Φ2 in (1 in = 2.54 cm) singlets and consists of two components: a microscope objective with a numerical aperture of 0.47 and a telephoto objective with a long effective focal length of 1826 mm. Both are infinitely corrected, allowing the distance between them to be adjusted to insert optical elements for irradiating atoms with laser beams of different wavelengths without affecting the imaging resolution. Taking the manufacturing and assembling tolerances into consideration, the Monte Carlo analyses show that more than 95% of the random samples are diffraction-limited within the field of view. This high success rate ensures that these two objectives can be achieved easily in the experiment. Combined with its performance with other wavelengths (470–1064 nm), this imaging system can be used for imaging different atom species, such as sodium, lithium, and cesium.