Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.24396

Roadmap to planar electron-ion point Paul trap

Niklas Vilhelm Lausti, Kumar, Vineet, Ivan Hudák, Michal Tarana, Michal Hejduk

Published Sep 29, 2025• 3 citations
arXivHTMLPDF

Abstract

We present a technical guide to developing a quantum-mechanical system with co-trapped laser-cooled ions and electrons, aiming to utilize this mixed-species system in quantum computing and sensing. We outline a method to control the system's quantum state and provide a blueprint for a forward-compatible design for containing it. The proposed technical solution features a planar configuration with a large trapping volume located at a considerable height above the electrode plane. We detail a manufacturing method using copper-coated, laser-machined glass substrates suitable for a high-power microwave drive signal. We discuss electron state decoherence in this trap and suggest that using superconductive films could enhance trapping abilities, though initial experiments are feasible with the current design.

DOI
10.48550/arxiv.2509.24396

Related papers

Surface trap with dc-tunable ion-electrode distance

Da An, Clemens Matthiesen, Ahmed Abdelrahman +5 more

We describe the design, fabrication, and operation of a novel surface-electrode Paul trap that produces a radio-frequency-null along the axis perpendicular to the trap surface. This arrangement enables control of the vertical trapping potential and consequentially the ion-electrode distance via dc-electrodes only. We demonstrate the confinement of single 40Ca+ ions at heights between 50 μm and 300 μm above planar copper-coated aluminum electrodes. Laser-cooling and coherent operations are performed on both the planar and vertical motional modes. This architecture provides a platform for precision electric-field noise detection and trapping of vertical ion strings without excess micromotion and may have applications for scalable quantum computers with surface ion traps.

arXiv:1807.06043•Review of Scientific Instruments•Sep 1, 2018•13 citations

Experimental investigation of planar ion traps

C. E. Pearson, David R. Leibrandt, Waseem Bakr +3 more

Chiaverini et al. [Quantum Inf. Comput. 5, 419 (2005)] recently suggested a linear Paul trap geometry for ion-trap quantum computation that places all of the electrodes in a plane. Such planar ion traps are compatible with modern semiconductor fabrication techniques and can be scaled to make compact, many-zone traps. In this paper we present an experimental realization of planar ion traps using electrodes on a printed circuit board to trap linear chains of tens of charged particles of $0.44\phantom{\rule{0.3em}{0ex}}\mathrm{\ensuremath{\mu}}\mathrm{m}$ diameter in a vacuum of $15\phantom{\rule{0.3em}{0ex}}\mathrm{Pa}\phantom{\rule{0.3em}{0ex}}({10}^{\ensuremath{-}1}\phantom{\rule{0.3em}{0ex}}\mathrm{torr})$. With these traps we address concerns about the low trap depth of planar ion traps and develop control electrode layouts for moving ions between trap zones without facing some of the technical difficulties involved in an atomic ion-trap experiment. Specifically, we use a trap with 36 zones (77 electrodes) arranged in a cross to demonstrate loading from a traditional four-rod linear Paul trap, linear ion movement, splitting and joining of ion chains, and movement of ions through intersections. We further propose an additional dc-biased electrode above the trap which increases the trap depth dramatically, and a planar ion-trap geometry that generates a two-dimensional lattice of point Paul traps.

arXiv:quant-ph/0511018•Physical Review A•Mar 3, 2006•119 citations

Microfabricated Paul traps for levitating and shuttling of ions and charged particles

Hwanjit Rattanasonti

Trapped ions in Paul traps (radio frequency ion traps) are a promising candidate for the realization of a quantum computer. To date, experimental demonstrations of quantum computing and information processing with trapped ions have been limited to small numbers of quantum bits (qubits). The most prominent challenge to realise ion-trap quantum computation is to scale the system and control a large number of trapped ions coherently. Surface-electrode ion trap designs which are amenable to various microfabrication techniques offer a path to achieve this. In this work, design, fabrication and key operations of two types of surface-electrode ion traps, i.e. a Y-junction trap and a two-dimensional (2D) hexagonal lattice trap developed towards scaling ion-trap architectures, are presented. The steps involved in the fabrication of the ion-trap devices included photolithography, wet etch (hydrofluoric acid etch) and dry etch (deep reactive ion and inductively coupled plasma etching), and metal evaporation. The devices were fabricated on SOI substrates with different buried oxide thicknesses (i.e. 5 µm and 10 µm) and different metals for the trap electrodes (i.e. gold and aluminium). An extremely high-breakdown voltage up to 1 kV was measured in vacuum for the SOI-built test devices with a 10 µm-thick buried oxide formed by oxide film-to-oxide film bonding process. This is attributed to the deep V-shaped undercut profile of the buried oxide layer which resulted in a large breakdown path length, and so mitigating surface breakdown effects. Owing to the V-shaped undercut profile, the surface breakdown voltage was improved by 15% for the devices fabricated on SOI substrates with a 10 µm-thick buried oxide. In the first experiment, the demonstration of ytterbium (174Yb+) ion trapping in the 2D hexagonal lattice trap is achieved with a relatively long lifetime of a laser-cooled ion up to 90 minutes and ≤ 5 minutes without cooling in ultra-high vacuum system. The 2D lattice trap design allows for reliable trapping of 2D ion lattices, rudimentary shuttling between lattice sites and deterministic introducing of defects into the ion lattice. Based on all these abilities, such a 2D lattice trap with the predicted reduction of lattice spacing down to 32 µm can be configured as a versatile architecture for 2D quantum simulations with trapped ions. In the second experiment, microparticle trapping in the 2D lattice trap, performed in air, is achieved with the longest trapping lifetime of 60 minutes. Both gold and aluminium-coated electrodes also lead to comparable trapping performances. Furthermore, the in situ levitation of microparticles is successfully demonstrated at the maximum levitation height of 30 µm. This ability provides additional control on the trapping height which increases the overall functionality of the 2D lattice trap.

•Jan 1, 2015•0 citations

Planar Paul traps and trap arrays

Ralph G. DeVoe, Richard G. Brewer

We report the laser cooling and trapping of barium ions in a novel planar Paul trap. Unlike other rf quadrupole traps, the electrodes of a planar Paul trap are confined to one or more parallel planes. They may therefore be constructed on a micrometer scale by the same photolithographic techniques used for semiconductor devices. Such devices are under construction in our laboratory. Micro-traps permit entirely new studies, for example, superradiance of a few ions, which occurs as ion-ion distances approach one wavelength of light. Photolithography can also generate an array of traps on a single substrate for an atomic clock. Our traps consist of one or more parallel planes, one above the other, each plane having either a conducting ring or a hole in a conducting sheet. Thus, a ring or a hole results in a potential well for trapping. A three-ring design produces a quadrupole potential that is harmonic up to eighth-order for a particular choice of ring diameters and spacings. Three-hole traps have been constructed with inner hole radii ranging from 50 to 400 μm, and both single barium ions and clouds have been observed.

Annual Meeting Optical Society of America•Jan 1, 1992•0 citations

Surface-electrode point Paul trap

Tony Hyun Kim, Peter F. Herskind, Taehyun Kim +2 more

We present a model as well as experimental results for a surface electrode radiofrequency Paul trap that has a circular electrode geometry well suited for trapping single ions and two-dimensional planar ion crystals. The trap design is compatible with microfabrication and offers a simple method by which the height of the trapped ions above the surface may be changed in situ. We demonstrate trapping of single $^{88}\mathrm{Sr}$${}^{+}$ ions over an ion height range of $200\ensuremath{-}1000$ $\ensuremath{\mu}$m for several hours under Doppler laser cooling and use these to characterize the trap, finding good agreement with our model.

arXiv:1008.1603•Physical Review A•Oct 12, 2010•43 citations

Towards a new quantum system: Electron guiding in a microwave potential

J. M. Hammer, Johannes Hoffrogge, Roman Fröhlich +1 more

We investigate a miniaturized planar ac-quadrupole guide (linear Paul trap) to confine electrons transversely and guide them longitudinally along microwave electrodes on a microfabricated chip. In combination with a single-atom tip electron emitter, which has been shown to be a perfect point source of electrons, we are aiming at direct injection of electrons into the quantum mechanical ground state of the transverse trapping potential (without the need for cooling). The quantum mechanical states of the transverse harmonic potential could be used as carrier of quantum information in a wholly new quantum device.

International Vacuum Nanoelectronics Conference•Jan 1, 2011•0 citations
We present a technical guide to developing a quantum-mechanical system with co-trapped laser-cooled ions and electrons, aiming to utilize this mixed-species system in quantum computing and sensing. We outline a method to control the system's quantum state and provide a blueprint for a forward-compatible design for containing it. The proposed technical solution features a planar configuration with a large trapping volume located at a considerable height above the electrode plane. We detail a manufacturing method using copper-coated, laser-machined glass substrates suitable for a high-power microwave drive signal. We discuss electron state decoherence in this trap and suggest that using superconductive films could enhance trapping abilities, though initial experiments are feasible with the current design.
We describe the design, fabrication, and operation of a novel surface-electrode Paul trap that produces a radio-frequency-null along the axis perpendicular to the trap surface. This arrangement enables control of the vertical trapping potential and consequentially the ion-electrode distance via dc-electrodes only. We demonstrate the confinement of single 40Ca+ ions at heights between 50 μm and 300 μm above planar copper-coated aluminum electrodes. Laser-cooling and coherent operations are performed on both the planar and vertical motional modes. This architecture provides a platform for precision electric-field noise detection and trapping of vertical ion strings without excess micromotion and may have applications for scalable quantum computers with surface ion traps.
Chiaverini et al. [Quantum Inf. Comput. 5, 419 (2005)] recently suggested a linear Paul trap geometry for ion-trap quantum computation that places all of the electrodes in a plane. Such planar ion traps are compatible with modern semiconductor fabrication techniques and can be scaled to make compact, many-zone traps. In this paper we present an experimental realization of planar ion traps using electrodes on a printed circuit board to trap linear chains of tens of charged particles of $0.44\phantom{\rule{0.3em}{0ex}}\mathrm{\ensuremath{\mu}}\mathrm{m}$ diameter in a vacuum of $15\phantom{\rule{0.3em}{0ex}}\mathrm{Pa}\phantom{\rule{0.3em}{0ex}}({10}^{\ensuremath{-}1}\phantom{\rule{0.3em}{0ex}}\mathrm{torr})$. With these traps we address concerns about the low trap depth of planar ion traps and develop control electrode layouts for moving ions between trap zones without facing some of the technical difficulties involved in an atomic ion-trap experiment. Specifically, we use a trap with 36 zones (77 electrodes) arranged in a cross to demonstrate loading from a traditional four-rod linear Paul trap, linear ion movement, splitting and joining of ion chains, and movement of ions through intersections. We further propose an additional dc-biased electrode above the trap which increases the trap depth dramatically, and a planar ion-trap geometry that generates a two-dimensional lattice of point Paul traps.
Trapped ions in Paul traps (radio frequency ion traps) are a promising candidate for the realization of a quantum computer. To date, experimental demonstrations of quantum computing and information processing with trapped ions have been limited to small numbers of quantum bits (qubits). The most prominent challenge to realise ion-trap quantum computation is to scale the system and control a large number of trapped ions coherently. Surface-electrode ion trap designs which are amenable to various microfabrication techniques offer a path to achieve this. In this work, design, fabrication and key operations of two types of surface-electrode ion traps, i.e. a Y-junction trap and a two-dimensional (2D) hexagonal lattice trap developed towards scaling ion-trap architectures, are presented. The steps involved in the fabrication of the ion-trap devices included photolithography, wet etch (hydrofluoric acid etch) and dry etch (deep reactive ion and inductively coupled plasma etching), and metal evaporation. The devices were fabricated on SOI substrates with different buried oxide thicknesses (i.e. 5 µm and 10 µm) and different metals for the trap electrodes (i.e. gold and aluminium). An extremely high-breakdown voltage up to 1 kV was measured in vacuum for the SOI-built test devices with a 10 µm-thick buried oxide formed by oxide film-to-oxide film bonding process. This is attributed to the deep V-shaped undercut profile of the buried oxide layer which resulted in a large breakdown path length, and so mitigating surface breakdown effects. Owing to the V-shaped undercut profile, the surface breakdown voltage was improved by 15% for the devices fabricated on SOI substrates with a 10 µm-thick buried oxide. In the first experiment, the demonstration of ytterbium (174Yb+) ion trapping in the 2D hexagonal lattice trap is achieved with a relatively long lifetime of a laser-cooled ion up to 90 minutes and ≤ 5 minutes without cooling in ultra-high vacuum system. The 2D lattice trap design allows for reliable trapping of 2D ion lattices, rudimentary shuttling between lattice sites and deterministic introducing of defects into the ion lattice. Based on all these abilities, such a 2D lattice trap with the predicted reduction of lattice spacing down to 32 µm can be configured as a versatile architecture for 2D quantum simulations with trapped ions. In the second experiment, microparticle trapping in the 2D lattice trap, performed in air, is achieved with the longest trapping lifetime of 60 minutes. Both gold and aluminium-coated electrodes also lead to comparable trapping performances. Furthermore, the in situ levitation of microparticles is successfully demonstrated at the maximum levitation height of 30 µm. This ability provides additional control on the trapping height which increases the overall functionality of the 2D lattice trap.
We report the laser cooling and trapping of barium ions in a novel planar Paul trap. Unlike other rf quadrupole traps, the electrodes of a planar Paul trap are confined to one or more parallel planes. They may therefore be constructed on a micrometer scale by the same photolithographic techniques used for semiconductor devices. Such devices are under construction in our laboratory. Micro-traps permit entirely new studies, for example, superradiance of a few ions, which occurs as ion-ion distances approach one wavelength of light. Photolithography can also generate an array of traps on a single substrate for an atomic clock. Our traps consist of one or more parallel planes, one above the other, each plane having either a conducting ring or a hole in a conducting sheet. Thus, a ring or a hole results in a potential well for trapping. A three-ring design produces a quadrupole potential that is harmonic up to eighth-order for a particular choice of ring diameters and spacings. Three-hole traps have been constructed with inner hole radii ranging from 50 to 400 μm, and both single barium ions and clouds have been observed.
We present a model as well as experimental results for a surface electrode radiofrequency Paul trap that has a circular electrode geometry well suited for trapping single ions and two-dimensional planar ion crystals. The trap design is compatible with microfabrication and offers a simple method by which the height of the trapped ions above the surface may be changed in situ. We demonstrate trapping of single 88Sr^{88}\mathrm{Sr}88Sr+{}^{+}+ ions over an ion height range of $200\ensuremath{-}1000$ $\ensuremath{\mu}$m for several hours under Doppler laser cooling and use these to characterize the trap, finding good agreement with our model.
We investigate a miniaturized planar ac-quadrupole guide (linear Paul trap) to confine electrons transversely and guide them longitudinally along microwave electrodes on a microfabricated chip. In combination with a single-atom tip electron emitter, which has been shown to be a perfect point source of electrons, we are aiming at direct injection of electrons into the quantum mechanical ground state of the transverse trapping potential (without the need for cooling). The quantum mechanical states of the transverse harmonic potential could be used as carrier of quantum information in a wholly new quantum device.